intimate with familiar 0.5 problems...

Dino <[email protected]>
Newsgroups gmane.comp.handhelds.linux.intimate
Message-ID <[email protected]>
I got intimate to install properly on to a 2GB pcmcia drive using a dual
sleeve setup running familiar 0.5pre.  I have problems booting into it
though...

It seems like it boots into intimate properly since I get the message
"Booting intimate from microdrive...".  But it stops after loading inetd
and I don't get a terminal or any X display at the end...  Anyone have
clues?

my linuxargs: 
noinitrd root=/dev/mtdblock/2 init=/linuxrc.intimate console=ttySA0
devfs=mount

The last few messages on the screen:
none on /dev/pts type devpts (rw,mode=0622)
Running 0dns-down to make sure resolv.conf is
ok.../etc/ppp/ip-down.d/0dns-down
: /etc/init.d/nscd: No such file or directory
done.
Cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces: SIOCADDRT: File exists
done.

Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Wed Dec 31 19:00:35 EST 1969

Cleaning: /tmp /var/lock /var/run.
Initializing random number generator... done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting internet superserver: inetd.
INIT: Id "T0" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel

Dino
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.