Re: intimate with familiar 0.5 problems...

nevermind... figured all my problems out!

Dino wrote:
> 
> I got intimate to install properly on to a 2GB pcmcia drive using a dual
> sleeve setup running familiar 0.5pre.  I have problems booting into it
> though...
> 
> It seems like it boots into intimate properly since I get the message
> "Booting intimate from microdrive...".  But it stops after loading inetd
> and I don't get a terminal or any X display at the end...  Anyone have
> clues?
> 
> my linuxargs:
> noinitrd root=/dev/mtdblock/2 init=/linuxrc.intimate console=ttySA0
> devfs=mount
> 
> The last few messages on the screen:
> none on /dev/pts type devpts (rw,mode=0622)
> Running 0dns-down to make sure resolv.conf is
> ok.../etc/ppp/ip-down.d/0dns-down
> : /etc/init.d/nscd: No such file or directory
> done.
> Cleaning: /etc/network/ifstate.
> Setting up IP spoofing protection: rp_filter.
> Configuring network interfaces: SIOCADDRT: File exists
> done.
> 
> Setting the System Clock using the Hardware Clock as reference...
> System Clock set. Local time: Wed Dec 31 19:00:35 EST 1969
> 
> Cleaning: /tmp /var/lock /var/run.
> Initializing random number generator... done.
> INIT: Entering runlevel: 2
> Starting system log daemon: syslogd.
> Starting kernel log daemon: klogd.
> Starting internet superserver: inetd.
> INIT: Id "T0" respawning too fast: disabled for 5 minutes
> INIT: no more processes left in this runlevel
> 
> Dino
> _______________________________________________
> Intimate mailing list
> [email protected]
> http://handhelds.org/mailman/listinfo/intimate