Re: [Familiar] RE: It's working!

ePAc <[email protected]>
Newsgroups gmane.comp.handhelds.linux.intimate
Message-ID <Pine.LNX.4.33.0110102127550.9596-100000__37312.4788086445$1115030499$gmane$org@pan.korigan.net>
usually, you can do "ESC" (the escape key) and then the number,

like pressing ESC then 1 will do F1, ESC and 0 will do F10, (and
sometimes, you can do ESC then - to get F11 and ESC then = for F12

---
Nothing is foolproof to a sufficiantly talented fool...
  oo
,(..)\
  ~~

On Wed, 10 Oct 2001, Munson, Jason (MED) wrote:

> Ack! How do you send a function key through the terminal emulator,
> namely F10?
>
> thanks,
>
> Jason
>
>
> -----Original Message-----
> From: Munson, Jason (MED)
> Sent: Wednesday, October 10, 2001 5:48 PM
> To: 'Hietaniemi Jarkko (NRC/Boston)'; [email protected]
> Cc: [email protected]
> Subject: [Intimate] It's working!
>
>
> Hey everyone,
>
> Still not sure about sound, but Intimate is finally booting! I added a
> 'modprobe h3600_generic_sleeve' to the /linuxrc.initmate file, and used
> the linuxargs:
> set linuxargs "noinitrd root=/dev/mtdblock/2 init=/linuxrc.intimate
> console=ttySA0 devfs=mount"
>
> Now I just need to get rid of that awful X screen that comes up. But the
> system is booting.
>
> Now that I have a working system, I'll wipe everything off the Ipaq and
> reinstall, documenting the process step-by-step. Who should I send it
> to, just the mailing list?
>
> Thanks for everyone's help, I'll post a complete procedure here
> regardless, from the ground up. I still want to make sure sound is
> working, maybe I'll load an MP3.
>
> Jason
>
>
> -----Original Message-----
> From: Hietaniemi Jarkko (NRC/Boston)
> [mailto:[email protected]]
> Sent: Wednesday, October 10, 2001 5:36 PM
> To: [email protected]
> Cc: [email protected]
> Subject: [Intimate] worked yesterday, broken today...
>
>
> Did something change real recently in, say, the h3600 sleeve modules,
> or the reiserfs modules, or the Intimate installer...  as I reported
> few days ago, back then my setup worked, now it doesn't...
>
> What I do is:
> (1) I have task-bootstrap.tar.gz from Sep 29, (still there,
>     ftp://familiar.handhelds.org/familiar/feeds/unstable/install/H3600/)
>     that I unpack and inject our WLAN settings and various other small
> config stuff
> (2) I repackage the directorynto a jffs2 image
> (3) Flash it in
> (4) Run another script that installs task-complete et alia
>
> Everything up to this point works just fine as it did yesterday... but
> the following
> steps result in a mangled iPAQ:
>
> (5) Install reiserfs-module, reiserfs-modules-2.4.7-rmk3-np1-devfs,
>     backpaq-modules-2.4.7-rmk3-np1-devfs
> (6) Get and run the Intimate beta-installer
> (7) Do the needed edits: ttySA0 in inittab and securetty, mtdblock/2 in
> fstab,
>     h3600_generic_sleeve in linuxrc.intimate.
> (8) Using ipaqbb patch the linuxargs to point to mtdblock/2.
>
> The result is that the microdrive seems once again have gone bye-bye:
>
> [...snip...]
> INIT: version 2.78 booting
> Mounting local filesystems...
> warning: can't open /etc/mtab: No such file or directory
> ramfs on /mnt/ramfs type ramfs (rw)
> devpts on /dev/pts type devpts (rw,mode=0622)
> Calculating module dependencies... depmod: Can't open
> /lib/modules/2.4.7-rmk3-np
> 1-devfs/modules.dep for writing
> done.
> Loading modules: apm modprobe: Can't open dependencies file
> /lib/modules/2.4.7-r
> mk3-np1-devfs/modules.dep (No such file or directory)
> h3600_ts modprobe: Can't open dependencies file
> /lib/modules/2.4.7-rmk3-np1-devf
> s/modules.dep (No such file or directory)
> sa1100-rtc modprobe: Can't open dependencies file
> /lib/modules/2.4.7-rmk3-np1-de
> vfs/modules.dep (No such file or directory)
> h3600-sleeve modprobe: Can't open dependencies file
> /lib/modules/2.4.7-rmk3-np1-
> devfs/modules.dep (No such file or directory)
> h3600_generic_sleeve modprobe: Can't open dependencies file
> /lib/modules/2.4.7-r
> mk3-np1-devfs/modules.dep (No such file or directory)
> bitsy-uda1341 modprobe: Can't open dependencies file
> /lib/modules/2.4.7-rmk3-np1
> -devfs/modules.dep (No such file or directory)
> h3600_backpaq modprobe: Can't open dependencies file
> /lib/modules/2.4.7-rmk3-np1
> -devfs/modules.dep (No such file or directory)
>
> modprobe: Can't open dependencies file
> /lib/modules/2.4.7-rmk3-np1-devfs/modules
> .dep (No such file or directory)
> Setting the System Clock using the Hardware Clock as reference...
> Cannot access the Hardware Clock via any known method.
> Use the --debug option to see the details of our search for an access
> method.
> INIT: Entering runlevel: 2
> Configuring network interfaces: /etc/network/ifstate: No such file or
> directory
> done.
> Starting PCMCIA services:touch: creating `/var/run/pcmcia-scheme': No
> such file
> or directory
>  modulesLinux Kernel Card Services 3.1.22
>   options:  [pm]
> SA-1100 PCMCIA (CS release 3.1.22)
> sa1100_bitsy_common_pcmcia_get_irq_info
> sa1100_bitsy_common_pcmcia_get_irq_info
> sa1100: initialization complete
>  cardmgr.
> cardmgr[67]: starting, version is 3.1.20
> cardmgr[67]: no sockets found!
> cardmgr[67]: exiting
> Starting OpenBSD Secure Shell server: sshderror: Could not load host
> key: /etc/s
> sh/ssh_host_key: No such file or directory
> Disabling protocol version 1
> error: Could not load DSA host key: /etc/ssh/ssh_host_dsa_key
> Disabling protocol version 2
> sshd: no hostkeys available -- exiting.
> sshd: no hostkeys available -- exiting.
>
> .
> Starting X...
> bad ioctl: Invalid argument
> _XSERVTransSocketUNIXCreateListener: mkdir(/tmp/.X11-unix) failed, errno
> = 2
> _XSERVTransMakeAllCOTSServerListeners: failed to create listener for
> local
>
> Fatal server error:
> Failed to establish all listening sockets
> xset:  unable to open display ":0.0"
> BaseDisplay::BaseDisplay: connection to X server failed.
> xset:  unable to open display ":0.0"
> xrdb: No such file or directory
> xrdb: Can't open display ':0.0'
> xrdb: No such file or directory
> xrdb: Can't open display ':0.0'
>
> familiar login:
> _______________________________________________
> Intimate mailing list
> [email protected]
> http://handhelds.org/mailman/listinfo/intimate
> _______________________________________________
> Intimate mailing list
> [email protected]
> http://handhelds.org/mailman/listinfo/intimate
> _______________________________________________
> Familiar mailing list
> [email protected]
> http://handhelds.org/mailman/listinfo/familiar
> irc://irc.openprojects.net #familiar
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.