Linux on Jornada 565 ``issue''.

Hello,

I followed instructions on
   http://www.handhelds.org/projects/jornada56x.html
to install linux on a 64M HP Jornada 565.

I grabbed the linked version of
BootBlaster-j56x.exe and
bootldr-j56x-64M-2.21.12.bin

I copied them on a CF card, and put it in the jornada.
I ran BootBlaster,
saved the original bootloader,
installed the ``program'' bootldr-j56x-64M-2.21.12.bin,
waited for it to finish, and then ``verified'' the installation.

I then pressed the ``reset switch'' on the back of the Jornada.
The winCE image disappeared, and then nothing.

Connecting a serial cable on the Jornada does nothing.
Running ``cu -l /dev/cuad0 -s 115200''
on the host machines shows ``Connected'', and then nothing.
Pressing the buttons on the PDA does not seem to have any effect.

md5 checksums of the files I used:

bb1a3ec6a35826f954bba4d7717029a2  BootBlaster-j56x.exe
1d81582dcaef677cdbd1675218061594  bootldr-j56x-64M-2.21.1
2.bin
9269b21d08523022273d2a617c6274c2  bootopie-v0.8.4-h3900.tar

If you have any clue on what I could try and do, I would appreciate it.

--Vincent