Re: "Fils tendus" passed from the PC to the Z22
Rick Price <[email protected]> Tue, 29 Aug 2006 11:44:32 -0400 (Eastern Daylight Time)
| Newsgroups | gmane.comp.handhelds.palm.progect |
|---|---|
| Message-ID | <[email protected]> |
I can basically understand what you are saying, but it would help if you could tell me exactly what the problem you are having is in one sentence. My friends at work translated your previous emails, but I still had trouble understanding. * Installing projects to the Palm Device (Z22) It sounds like you are trying to get a project that you edited on PDesk into your Palm device. To do that, you have to install it. If you find it under "PC ONLY PROJECTS" then it has not been installed to the Palm device. Once it has been installed to the Palm device (and probably after a HotSync), then it should show up under the category you assigned it. The other solution would be to create the project on your Z22, and then Hotsync, it will then show up in PDesk. * Getting the plugins to work Some plugins do not work correctly. Some of the people here are working on fixing a few of them. * Be careful Sometimes the hotsync will destroy your project, I think it normally only happens when you change it on both your palm device and in PDesk. I am working on replacements for the problem software, but it is moving slowly. * Contact me directly You can send me emails directly to [email protected], and then you should be able to send me your log files as attachments which should not get cut off. I'm happy to help you, so don't worry about asking questions. Rick On Tue, 29 Aug 2006, "mguicharnaud" wrote: > > Hi Rick, > > > > * THE event : > > I don't know how, I don't know why, but it happened ! > > After THE Hot Sync, I find it in my Z22 and I can open it in progect. > > Actually, it is too small to can see if everything has been modified or > lost. > > * THE Hot Sync : > > I found, between others, a freeware program : LOGGER P by Rodolfo TURCO > > http://www.webalice.it/rodolfo.turco/ > <http://www.webalice.it/rodolfo.turco/> > > in the magazine "Encyclopédie du PDA" with CD-ROM. That is an utility > for "gestion de port série sur Palm", reading that, I think > "conduit". > > Hot Sync > > I see very fastly on the PC's screen anything like : study of the > configuration of your (? too fast), then anything like : installing > "Fils tendus" > > Surprise and joyfull. > > (The other new program - correct Superwaba - is installed by this Hot > Sync and LOGGER P does not appear in the Z22) > > I saw anywhere "conduit has changed" > > * Docs : > > I join pdesk, log and THE Hot Sync Diary with the two following where it > is a conduit problem. IT IS NOT BAD. > > ------------------------------------------------------------------------\ > ------ > New Session started on Sat Aug 26 17:17:35 2006 > platform : win32 > byteorder : little > ------------------------------------------------------------------------\ > ------ > PluginManager started > Start in C:\Program Files\PDesk > Now in C:\Program Files\PDesk\plugins > got plugs : ['HTMLInOut.py', 'MSProjectInOut.py', 'TextInOut.py'] > imported <module 'HTMLInOut' from 'C:\Program > Files\PDesk\plugins\HTMLInOut.pyo'> successfully > imported <module 'MSProjectInOut' from 'C:\Program > Files\PDesk\plugins\MSProjectInOut.pyo'> successfully > imported <module 'TextInOut' from 'C:\Program > Files\PDesk\plugins\TextInOut.pyo'> successfully > loaded plugins : [<class 'HTMLInOut.HTMLInOut'>, <class > 'MSProjectInOut.MSProjectInOut'>, <class 'TextInOut.TextInOut'>] > Trying <class 'HTMLInOut.HTMLInOut'> > Trying <class 'MSProjectInOut.MSProjectInOut'> > Trying <class 'TextInOut.TextInOut'> > returning output plugins : [<class 'HTMLInOut.HTMLInOut'>, <class > 'MSProjectInOut.MSProjectInOut'>, <class 'TextInOut.TextInOut'>] > returning input plugins : [<class 'TextInOut.TextInOut'>] > Traceback (most recent call last): > File "pdesk.pyw", line 77, in ? > File "pdesk.pyw", line 71, in main > File "wx\_core.pyo", line 7473, in __init__ > File "wx\_core.pyo", line 7125, in _BootstrapApp > Traceback (most recent call last): > File "MainFrame.pyo", line 717, in OnFileOpen > File "MainFrame.pyo", line 619, in openDB > File "ntpath.pyo", line 164, in split > File "ntpath.pyo", line 119, in splitdrive > TypeError: unsubscriptable object > End date : Sat Aug 26 17:20:00 2006 > Session ended normally. > in use') > > > ------------------------------------------------------------------------\ > ------ > New Session started on Mon Aug 28 16:46:23 2006 > platform : win32 > byteorder : little > ------------------------------------------------------------------------\ > ------ > PluginManager started > Start in C:\Program Files\PDesk > Now in C:\Program Files\PDesk\plugins > got plugs : ['HTMLInOut.py', 'MSProjectInOut.py', 'TextInOut.py'] > imported <module 'HTMLInOut' from 'C:\Program > Files\PDesk\plugins\HTMLInOut.pyo'> successfully > imported <module 'MSProjectInOut' from 'C:\Program > Files\PDesk\plugins\MSProjectInOut.pyo'> successfully > imported <module 'TextInOut' from 'C:\Program > Files\PDesk\plugins\TextInOut.pyo'> successfully > loaded plugins : [<class 'HTMLInOut.HTMLInOut'>, <class > 'MSProjectInOut.MSProjectInOut'>, <class 'TextInOut.TextInOut'>] > Trying <class 'HTMLInOut.HTMLInOut'> > Trying <class 'MSProjectInOut.MSProjectInOut'> > Trying <class 'TextInOut.TextInOut'> > returning output plugins : [<class 'HTMLInOut.HTMLInOut'>, <class > 'MSProjectInOut.MSProjectInOut'>, <class 'TextInOut.TextInOut'>] > returning input plugins : [<class 'TextInOut.TextInOut'>] > Listening on 127.0.0.1:9999 > Waiting for a request... > Going to users MOPAZ22 directory : C:\Program Files\Palm\MOPAZ2 > readRecordList, got a last one of length 56 > AppInfo : remaining len = 42 > Converter initialized for 2 to 2 > read last record, got a ref block > size = 296 > Fixed 0 errors during checkIntegrity > End date : Mon Aug 28 17:10:21 2006 > Session ended normally. > > > Opération HotSync lancée par MOPAZ22 le 08/28/06 19:01:10 > > - Echec de l'installation : C:\Program > Files\Palm\MOPAZ2\Install\FreeGrid_0.3b_french.prc > Installation échec de la synchronisation > > Erreur de la conduite « Installation » : Erreur inconnue. (65535) > Cet appareil ne dispose pas de connecteur d'extension. > OK Dépenses > OK Installation rapide > AddIt Manager Conduit processing transactions > AddIt - Processing Transactions No Transactions Detected > AddIt - Retrieving Files No Resources To Retrieve > AddIt - Installing Files No Files To Install > AddIt - Updating Databases > AdditTG - Processing Transactions No Transactions Detected > AdditTG - Retrieving Files > Stored AdditNewsTG_frFR-Content.pdb Version 7024 > AdditTG - Installing Files > Installing File AdditNewsTG_frFR-Content.pdb Version 7024 > AdditTG - Updating Databases > AmyKT - Processing Transactions No Transactions Detected > AmyKT - Retrieving Files No Resources To Retrieve > AmyKT - Installing Files No Files To Install > AmyKT - Updating Databases > AdditSystem - Processing Transactions No Transactions Detected > AdditSystem - Retrieving Files No Resources To Retrieve > AdditSystem - Installing Files No Files To Install > AdditSystem - Updating Databases > Pushed C:\Program Files\Palm\MOPAZ2\Addit\AdditNewsTG_frFR-Content.pdb > to handheld > OK Notes > OK Mémos > OK Calendrier > OK Contacts > OK Tâches > OK CASL > -- Sauvegarde de la base de lbPG-PROJECT_META_DATA dans le C:\Program > Files\Palm\MOPAZ2\Backup\lbPG-PROJECT_META_DATA.PDB > -- Sauvegarde de la base de AbacusMD dans le C:\Program > Files\Palm\MOPAZ2\Backup\AbacusMD.PRC > -- Sauvegarde de la base de psysLaunchDB dans le C:\Program > Files\Palm\MOPAZ2\Backup\psysLaunchDB.PDB > -- Sauvegarde de la base de Saved Preferences dans le C:\Program > Files\Palm\MOPAZ2\Backup\Saved_Preferences.PRC > OK Sauvegarde > > Opération HotSync terminée le 08/28/06 19:05:43 > > > > > > > > Opération HotSync lancée par MOPAZ22 le 08/28/06 18:26:54 > > - Fichier installé : C:\Program > Files\Palm\MOPAZ2\Install\Abacus!_MD_1_0_Palm_OS5_HiRes.prc > - Echec de l'installation : C:\Program > Files\Palm\MOPAZ2\Install\FreeGrid_0.3b_french.prc > Installation échec de la synchronisation > > Erreur de la conduite « Installation » : Erreur inconnue. (65535) > Cet appareil ne dispose pas de connecteur d'extension. > OK Dépenses > OK Installation rapide > AddIt Manager Conduit processing transactions > AddIt - Processing Transactions No Transactions Detected > AddIt - Retrieving Files No Resources To Retrieve > AddIt - Installing Files No Files To Install > AddIt - Updating Databases > AdditTG - Processing Transactions No Transactions Detected > AdditTG - Retrieving Files No Resources To Retrieve > AdditTG - Installing Files No Files To Install > AdditTG - Updating Databases > AmyKT - Processing Transactions No Transactions Detected > AmyKT - Retrieving Files No Resources To Retrieve > AmyKT - Installing Files No Files To Install > AmyKT - Updating Databases > AdditSystem - Processing Transactions No Transactions Detected > AdditSystem - Retrieving Files No Resources To Retrieve > AdditSystem - Installing Files No Files To Install > AdditSystem - Updating Databases > OK Notes > OK Mémos > OK Calendrier > OK Contacts > OK Tâches > OK CASL > -- Sauvegarde de la base de AS_1_KT_frFR-Content dans le C:\Program > Files\Palm\MOPAZ2\Backup\AS_1_KT_frFR-Content.PDB > -- Sauvegarde de la base de AS_2_KT_frFR-Content dans le C:\Program > Files\Palm\MOPAZ2\Backup\AS_2_KT_frFR-Content.PDB > -- Sauvegarde de la base de AS_Knowledge_frFR-Content dans le C:\Program > Files\Palm\MOPAZ2\Backup\AS_Knowledge_frFR-Content.PDB > -- Sauvegarde de la base de lbPG-PROJECT_META_DATA dans le C:\Program > Files\Palm\MOPAZ2\Backup\lbPG-PROJECT_META_DATA.PDB > -- Sauvegarde de la base de XPlatUtilProps! dans le C:\Program > Files\Palm\MOPAZ2\Backup\XPlatUtilProps!.PDB > -- Sauvegarde de la base de XPlatUtil! dans le C:\Program > Files\Palm\MOPAZ2\Backup\XPlatUtil!.PDB > -- Sauvegarde de la base de XPlatUI! dans le C:\Program > Files\Palm\MOPAZ2\Backup\XPlatUI!.PDB > -- Sauvegarde de la base de XPlatIo! dans le C:\Program > Files\Palm\MOPAZ2\Backup\XPlatIo!.PDB > -- Sauvegarde de la base de XPlatGame! dans le C:\Program > Files\Palm\MOPAZ2\Backup\XPlatGame!.PDB > -- Sauvegarde de la base de SuperWaba! dans le C:\Program > Files\Palm\MOPAZ2\Backup\SuperWaba!.PDB > -- Sauvegarde de la base de SuperWaba dans le C:\Program > Files\Palm\MOPAZ2\Backup\SuperWaba.PRC > -- Sauvegarde de la base de psysLaunchDB dans le C:\Program > Files\Palm\MOPAZ2\Backup\psysLaunchDB.PDB > -- Sauvegarde de la base de Saved Preferences dans le C:\Program > Files\Palm\MOPAZ2\Backup\Saved_Preferences.PRC > OK Sauvegarde > > Opération HotSync terminée le 08/28/06 18:30:29 > > > > > > > > Opération HotSync lancée par MOPAZ22 le 08/28/06 17:38:15 > > - Fichier installé : C:\Program Files\Palm\MOPAZ2\Install\lbPG-Fils > tendus.pdb > - Fichier installé : C:\Program > Files\Palm\MOPAZ2\Install\SuperWaba.pdb > - Fichier installé : C:\Program > Files\Palm\MOPAZ2\Install\SuperWaba.prc > - Fichier installé : C:\Program > Files\Palm\MOPAZ2\Install\XPlatGame.pdb > - Fichier installé : C:\Program Files\Palm\MOPAZ2\Install\XPlatIo.pdb > - Fichier installé : C:\Program Files\Palm\MOPAZ2\Install\XPlatUI.pdb > - Fichier installé : C:\Program > Files\Palm\MOPAZ2\Install\XPlatUtil.pdb > - Fichier installé : C:\Program > Files\Palm\MOPAZ2\Install\XPlatUtilProps.pdb > OK Installation > Cet appareil ne dispose pas de connecteur d'extension. > OK Dépenses > OK Installation rapide > AddIt Manager Conduit processing transactions > AddIt - Processing Transactions No Transactions Detected > AddIt - Retrieving Files No Resources To Retrieve > AddIt - Installing Files No Files To Install > AddIt - Updating Databases > AdditTG - Processing Transactions No Transactions Detected > AdditTG - Retrieving Files > Stored AdditNewsTG_frFR-Content.pdb Version 7021 > AdditTG - Installing Files > Installing File AdditNewsTG_frFR-Content.pdb Version 7021 > AdditTG - Updating Databases > AmyKT - Processing Transactions No Transactions Detected > AmyKT - Retrieving Files No Resources To Retrieve > AmyKT - Installing Files No Files To Install > AmyKT - Updating Databases > AdditSystem - Processing Transactions No Transactions Detected > AdditSystem - Retrieving Files No Resources To Retrieve > AdditSystem - Installing Files No Files To Install > AdditSystem - Updating Databases > Pushed C:\Program Files\Palm\MOPAZ2\Addit\AdditNewsTG_frFR-Content.pdb > to handheld > OK Notes > OK Mémos > OK Calendrier > OK Contacts > OK Tâches > OK CASL > -- Sauvegarde de la base de Settings4CBNT dans le C:\Program > Files\Palm\MOPAZ2\Backup\Settings4CBNT.PDB > -- Sauvegarde de la base de AS_1_KT_frFR-Content dans le C:\Program > Files\Palm\MOPAZ2\Backup\AS_1_KT_frFR-Content.PDB > -- Sauvegarde de la base de AS_2_KT_frFR-Content dans le C:\Program > Files\Palm\MOPAZ2\Backup\AS_2_KT_frFR-Content.PDB > -- Sauvegarde de la base de AS_Knowledge_frFR-Content dans le C:\Program > Files\Palm\MOPAZ2\Backup\AS_Knowledge_frFR-Content.PDB > -- Sauvegarde de la base de lbPG-PROJECT_META_DATA dans le C:\Program > Files\Palm\MOPAZ2\Backup\lbPG-PROJECT_META_DATA.PDB > -- Sauvegarde de la base de Icons-DateBK3 dans le C:\Program > Files\Palm\MOPAZ2\Backup\Icons-DateBK3.PRC > -- Sauvegarde de la base de DATEBK3 dans le C:\Program > Files\Palm\MOPAZ2\Backup\DATEBK3.PRC > -- Sauvegarde de la base de waba! dans le C:\Program > Files\Palm\MOPAZ2\Backup\waba!.PDB > -- Sauvegarde de la base de JawBreaker! dans le C:\Program > Files\Palm\MOPAZ2\Backup\JawBreaker!.PDB > -- Sauvegarde de la base de Fractals! dans le C:\Program > Files\Palm\MOPAZ2\Backup\Fractals!.PDB > -- Sauvegarde de la base de JawBreaker dans le C:\Program > Files\Palm\MOPAZ2\Backup\JawBreaker.PRC > -- Sauvegarde de la base de Fractals dans le C:\Program > Files\Palm\MOPAZ2\Backup\Fractals.PRC > -- Sauvegarde de la base de SWNatives dans le C:\Program > Files\Palm\MOPAZ2\Backup\SWNatives.PRC > -- Sauvegarde de la base de psysLaunchDB dans le C:\Program > Files\Palm\MOPAZ2\Backup\psysLaunchDB.PDB > -- Sauvegarde de la base de Saved Preferences dans le C:\Program > Files\Palm\MOPAZ2\Backup\Saved_Preferences.PRC > -- Sauvegarde de la base de Queries dans le C:\Program > Files\Palm\MOPAZ2\Backup\Queries.PDB > -- Sauvegarde de la base de JawBreakerWinners dans le C:\Program > Files\Palm\MOPAZ2\Backup\JawBreakerWinners.PDB > -- La base de données pour bee.PRC a été supprimée sur > l'ordinateur de poche. Déplacement de la sauvegarde vers le dossier > Archive. > -- La base de données pour Fences.PRC a été supprimée sur > l'ordinateur de poche. Déplacement de la sauvegarde vers le dossier > Archive. > -- La base de données pour Sokoban!.PDB a été supprimée sur > l'ordinateur de poche. Déplacement de la sauvegarde vers le dossier > Archive. > -- La base de données pour Sokoban.PRC a été supprimée sur > l'ordinateur de poche. Déplacement de la sauvegarde vers le dossier > Archive. > -- La base de données pour Wabatrix.PRC a été supprimée sur > l'ordinateur de poche. Déplacement de la sauvegarde vers le dossier > Archive. > -- La base de données pour XPlatIoUIUtil!.PDB a été > supprimée sur l'ordinateur de poche. Déplacement de la sauvegarde > vers le dossier Archive. > OK Sauvegarde > > Opération HotSync terminée le 08/28/06 17:40:33 > > > > I can't join the conduit's file it is too big, last mail it has been cut > in the middle. I am limited at 64 Ko. > > * I have a question > > Can you usefully understand when I write in english ? I know the > importance of the right word at the right place. Just mail me Yes or No, > if Yes then I go on else I return writting french. > > * A remark : > > I don't know if the fact have a rapport, but Real Player's .ink file's > name changed to ddcgfvt' > > It still join the correct .exe file. > > > > To later > > > > Monique > > > > > > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] Remember to visit Polls, Files and Bookmarks sections at http://groups.yahoo.com/group/progect. You are welcome to vote, upload your files and submit bookmarks. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/progect/ <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/