RE: cannot download an image

Hi Hp,

The size of the image is so big that it is occupying both FLASH chips.
Looks like the bootloader failed to flash the image.
Try again.

Regards
Walter

> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Johnny
> English
> Sent: Sunday, July 04, 2004 11:31 AM
> To: [email protected]
> Subject: [Simpad-general] cannot download an image
> 
> 
> Hi
> 
> Just got my simpad SL4. I followed the how-to and upgraded 
> the bootloader 
> 2.5.3. So far so good. Then I tried the to flash the linux opie image 
> 0.8.1.1 without success. See below the output of serload 
> after the download 
> was completed. After the download I pressed f in order to 
> boot from flash 
> but nothing happened. No response to any further keystrokes. Then I 
> terminated serload, startet minicom and pressed this little 
> reset button. 
> The monitor came up (see second output below). I have the 
> feeling the flash 
> is 'empty' (Boothdr at 0x05080000 -> 0xffffffff) or serload 
> failed at the 
> end of the download to write the header. I assume I have the right 
> bootloader as the reported version is 2.5.3. I can find 
> questions regarding 
> that problem in the archives but no answers.
> 
> Any help appreciated
> 
> Hp
> 
> serload-output------------------------------------------------
> ----------------------------------------
> jupiter:bootloader[1036] >>../serload-1.1_cvs/serload 
> ../initrd-SL4_0.8.1-1.bin
> Please press RESET at the back of the SIMpad!
> 
> PBL V2.4 20.07.2001
> Booting...
> ================================================
> Siemens Switzerland Bootloader V2.5.3 10.06.2003
> Running @206Mhz Processor ID 0x6901b118
> Press ESC for monitor
> Occupied Memory: [0x00004000-0x00008000],[0x00008014-0x0007500c]
> Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
> No 32Bit Flash detected 0x00000000
> FlashImage Checksum 0x05040014-0x05059f11=0x8912ac03 
> Bootloader Image OK
> Fabdata Flash @0x05059f18 Ram @0x00021f18 FABDATA: S842-CZCCA
> MQ200 - Revision ID=2 ...
> Initialise PCMCIA Interface... done.
> Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000000
> PCMCIA Card Attached... Man-ID: 0x0
> NO PCMCIA CARD! -- Use serial IO
> Sysinit done
> Setting baud rate to 115200
> Serial download request
> Booting : <NULL>
> Serial download entered.
> 
> Base : 0xc0208000 Size 16252908 entry:0xc0208000
> Calling Monitor*******\] 16252928***- ] 14339072/ ] 11876352
> 
> =====================
> Monitor:
> =====================
> Boot from Flash 'f'
> Boot from Net 'n'
> Power Off 'o'
> Erase PSM+Registry'p'
> Exit 'q'
> Erase Registry 'r'
> Erase Flash 'y'
> Soft Reset 's'
> Print Fab-String 'w'
> -> f
> 
> minicom-output------------------------------------------------
> ----------------------------------------
> 
> PBL V2.4 20.07.2001
> Booting...
> ================================================
> Siemens Switzerland Bootloader V2.5.3 10.06.2003
> Running @206Mhz Processor ID 0x6901b118
> Press ESC for monitor
> Occupied Memory: [0x00004000-0x00008000],[0x00008014-0x0007500c]
> Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
> No 32Bit Flash detected 0x00000000
> FlashImage Checksum 0x05040014-0x05059f11=0x8912ac03 
> Bootloader Image OK
> Fabdata Flash @0x05059f18 Ram @0x00021f18 FABDATA: S842-CZCCA
> MQ200 - Revision ID=2 ...
> Initialise PCMCIA Interface... done.
> Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000000
> No PCMCIA Card Attached
> NO PCMCIA CARD! -- Use serial IO
> Sysinit done
> .No serial download request
> Boothdr at 0x05080000 -> 0xffffffff
> Calling Monitor
> 
> =====================
> Monitor:
> =====================
> Boot from Flash 'f'
> Boot from Net 'n'
> Power Off 'o'
> Erase PSM+Registry'p'
> Exit 'q'
> Erase Registry 'r'
> Erase Flash 'y'
> Soft Reset 's'
> Print Fab-String 'w'
> ->
> 
> _________________________________________________________________
> MSN 8 with e-mail virus protection service: 2 months FREE* 
> http://join.msn.com/?page=features/virus
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
> digital self defense, top technical experts, no vendor pitches, 
> unmatched networking opportunities. Visit www.blackhat.com
> _______________________________________________
> Simpad-general mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/simpad-general
> 


-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com