Linux2.6 and relaunch of my work

Hi all,
semester is off and I hope to find some time to investigate on the Linux 2.6 
SA1100 port as it needs some work generally and specially for SImpad.

I wanted to spare a small log with you for now. The good thing a minimal 
kernel simpad kernel almost compiles out of the box, and the stuff missing is 
not rocket science so stay tuned.


regards holger


PBL V2.4 20.07.2001
Booting...
================================================
Siemens Switzerland Bootloader V2.5.3 10.06.2003
Running @206Mhz Processor ID 0x6901b118
Press ESC for monitor
Occupied Memory: [0x00004000-0x00008000],[0x00008014-0x0007500c]
Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
No 32Bit Flash detected 0x00000000
FlashImage Checksum 0x05040014-0x05059f11=0x8912ac03 Bootloader Image OK
Fabdata Flash @0x05059f18 Ram @0x00021f18 FABDATA: S842-KJWCN
MQ200 - Revision ID=2 ...
Initialise PCMCIA Interface... done.
Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000000
No PCMCIA Card Attached
NO PCMCIA CARD!  -- Use serial IO
Sysinit done
Setting baud rate to 115200
Serial download request
Booting : <NULL>
Serial download entered.

Base    : 0xc0080000 Size 1051920 entry:0xc0080000
[*********************\]  1051648
Load finished with 10kB/sec
Starting Image at c0080000 PPCR 0x0000000a
Uncompressing 
Linux........................................................................... 
done, booting the kernel.
Linux version 2.6.8-rc2 (ich@debian) (gcc version 3.3.3) #2 Tue Jul 20 
00:38:17 CEST 2004
CPU: StrongARM-1110 [6901b118] revision 8 (ARMv4)
Machine: Simpad
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:4
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: mtdparts=sa1100:512k(boot),1m(kernel),-(root) 
console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete 
rootfstype=jffs2
PID hash table entries: 512 (order 9: 4096 bytes)
Warning: uninitialized Real Time Clock
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62400KB available (1739K code, 556K data, 84K init)
Calibrating delay loop... 137.21 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Linux Kernel Card Services
  options:  [pm]
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Serial: SA11x0 driver $Revision: 1.50 $
ttySA1 at MMIO 0x80010000 (irq = 15) is a SA1100
ttySA0 at MMIO 0x80050000 (irq = 17) is a SA1100
Using anticipatory io scheduler
-- SA11xx Flash probe.  Please report results.
* Probing 0x00000000: MSC = 0x4c84 16 bit <6>SA1100-flash: Found 1 x16 devices 
at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
pass
* Probing 0x08000000: MSC = 0x4c86 16 bit <6>SA1100-flash: Found 1 x16 devices 
at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
pass
* Probing 0x10000000: MSC = 0x0108 32 bit <4>CFI: Found no SA1100-flash device 
at location zero
failed
* Probing 0x18000000: MSC = 0x2210 32 bit NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 84K
INIT: version 2.85 booting
/etc/rcS.d/S01banner: 5: cannot create /proc/sys/kernel/printk: Directory 
nonexistent
/etc/rcS.d/S01banner: 8: cannot create /dev/fb/0: Permission denied
Setting up device links for devfs: Setting up some devices
done
mount: Mounting rootfs on / failed: No such file or directory
mount: Mounting rootfs on / failed: No such file or directory
depmod: QM_MODULES: Function not implemented

modprobe: could not parse modules.dep

modprobe: could not parse modules.dep

Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
urandom start: failed.
INIT: Entering runlevel: 2
Starting Dropbear SSH server: Failed reading 
'/etc/dropbear/dropbear_dss_host_key', disabling DSS
dropbear.
Starting advanced power management daemon: apmd[552]: main(): open() failed: 
No such file or directory
apmd.
Starting PCMCIA services: cardmgr[610]: cannot access /lib/modules/2.6.8-rc2: 
No such file or directory
cardmgr[610]: watching 1 socket
done.
Starting syslogd/klogd: done
Starting Opie in 5 seconds... press key to interrupt.
You seem to already have a /root/Applications directory.
Assuming it is the Opie Applications directory. Exiting.
Starting Opie with syslog logging.....



-- 
_____________________________________________
Holger 'zecke' Freyther
Project OPIE- the Open Palmtop Integrated Environment
http://opie.handhelds.org 
Sponsor me! Donate Hardware!
http://handhelds.org/~zecke


-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click