Re: xilinx parallel III usable with simpad?

Hi Glenn!

First of all: I don't KNOW.
Any jtag device should work with any tjag cable, as far as there is at least 
one jtag device, the cable can work with and your software can deal with this 
cable and your device (i.e. the device's cpu and its flash memory). If the 
software knows all three components, then there is no reason, why it could 
not work. Information about that can of course be found in your jtag software 
docs.

God luck!
  Ralf

Am Samstag, 3. April 2004 20:47 schrieb Glenn:
> Hi all,
>
> Can I use the xilinx parallell III kit directly with simpad & jtag? I
> haven't found the time to make my own ( I wouldn't trust it either :) and
> my simpad is but a fragile coaster in the meantime.
>
> betst regards
> glenn
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> Simpad-general mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/simpad-general


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click