Re: CAN/CANopen boot loader

Hi,

I did a bootloader for (VSCP standard Bootloader ), some months before.
 for CAN bus :--
https://github.com/grodansparadis/vscp_firmware/blob/a51617cb21ec217df4a7d976122c6574a9750d38/avr/AAboot_Standard/AAboot.c

< 4K   -- will fit in 8-bit microcontroller

Only difference is .... CAN-open uses 11 bit ID .. while VSCP uses 29 bit
ID ... VSCP specification & implementation both are open...:-)

There is a Supporting tool for VSCP standard Bootloader download GUI  :--
http://sourceforge.net/projects/m2m/

Both Free of cost... :-)

For more info contact mailing list :---
http://sourceforge.net/p/m2m/mailman/?source=navbar

Regards,

Dinesh

On Sat, Jan 26, 2013 at 11:35 PM, Heinz-Jürgen Oertel <[email protected]
> wrote:

>
> Hello,
>
> does on of you have an expierence with the boot loader offered at:
> http://www.emtas.de/produkte/canopen-bootloader?lang=en
> and like to share?
>
> Regards
>    Heinz
> --
> Archives and useful links: http://groups.yahoo.com/group/CANbus
> Subscribe and unsubscribe at www.vector.com/canlist/
> Report any problems to <[email protected]>
>