Long press LIRC
andy fc <[email protected]>
| Newsgroups | gmane.comp.hardware.lirc |
|---|---|
| Message-ID | <CAAHKqiRs-VnOmcpfeF92ws2GB-xSt==KcUB8byzbszpdBQRdvw@mail.gmail.com> |
Hello.
I use LIRC with a Raspberry Pi to control Thomson MS5300
I need help for the the Power button
With my remote :
A simple press of "power" button on the remote switches to "standby mode".
A long press of "power" button "power off" the stereo.
:
With LIRC
irsend SEND_ONCE remote KEY_POWER send "standby mode" command
How to run a command that makes a long press ("power off")?
Thank
begin remote
>
> name Thomson_MS5300
> bits 24
> flags SPACE_ENC|CONST_LENGTH
> eps 30
> aeps 100
>
> header 4147 3931
> one 608 1901
> zero 608 894
> ptrail 610
> gap 86892
> toggle_bit_mask 0x0
>
> begin codes
> KEY_VOLUMEDOWN 0xC2E3D1
> KEY_VOLUMEUP 0xC2F3D0
> KEY_POWER 0xC2A3D5
> KEY_MODE 0xC413BE
> KEY_CHANNELUP 0xC2D3D2
> KEY_CHANNELDOWN 0xC2C3D3
> KEY_EJECTCD 0x9406BF
> KEY_BASSBOOST 0xC3F3C0
> KEY_EQUAL 0xCB234D
> KEY_MUTE 0xC283D7
> KEY_INFO 0xCD532A
> KEY_RADIO 0x8417BE
> KEY_B 0xC043FB
> KEY_PLAY 0x8157EA
> KEY_PREVIOUS 0x8227DD
> KEY_NEXT 0x8207DF
> KEY_RECORD 0x9176E8
> KEY_PAUSE 0x81F7E0
> KEY_PAUSECD 0x84D7B2
> KEY_PROG1 0xC183E7
> KEY_TIME 0xC3E3C1
> KEY_ADDRESSBOOK 0x8247DB
> KEY_DELETE 0x8237DC
> KEY_MEDIA_REPEAT 0x90C6F3
> KEY_SLEEP 0xC213DE
> KEY_TITLE 0xC163E9
> KEY_PRINT 0x9A565A
> KEY_PROGRAM 0x84A7B5
> end codes
>
> end remote
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot