RE: Enabling serial port 4

"Jeremy Kongs" <jeremy.kongs-6tN4nzCoH/[email protected]>
Newsgroups gmane.comp.hardware.microcontrollers.tini
Message-ID <[email protected]> 
Serial 4 is enabled by default for the 400. Calling
TINIOS.setSerial(TINIOS.SERIAL_SET_ENABLE, 4, true) should result in a
javax.comm.UnsupportedCommOperationException since it cannot be enabled or
disabled.

Jeremy

> -----Original Message-----
> From: tini-admin-6tN4nzCoH/[email protected] [mailto:[email protected]]On Behalf Of
> Shawn Silverman
> Sent: Sunday, February 01, 2004 6:38 PM
> To: tini-6tN4nzCoH/[email protected]
> Subject: [TINI]Enabling serial port 4
>
>
> Does serial4 need to be enabled with a
> TINIOS.setSerial(TINIOS.SERIAL_SET_ENABLE, 4, true) call?
>
> Thanks,
> 	-Shawn
>
> _______________________________________________
> TINI mailing list
> TINI-6tN4nzCoH/[email protected]
> To UNSUBSCRIBE, edit your profile, or see list archives:
> http://lists.dalsemi.com/mailman/listinfo/tini

_______________________________________________
TINI mailing list
TINI-6tN4nzCoH/[email protected]
To UNSUBSCRIBE, edit your profile, or see list archives:
http://lists.dalsemi.com/mailman/listinfo/tini
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.