DS80C400 MCU

Hello Everybody,

I am very new to this processor and TINI development environment. I have
gone through the
details of DS80C400 and found very exciting. It has got wonderful features.
With this, I have
gone ahead and made a simple board where 2MBytes of AMD Flash is interfaced
to CPU and 32KBytes of SRAM as a peripheral. Now I have to do all the
exercise of runing the code available on site freely and test it before
actual code.

It was found that tini_400.tbin and slush_400.tbin is not getting loaded in
the flash. While loading i get an error message. AMD Flash is mapped at
address 0x400000 by connecting nCE2 chip select signal. I want to run a
simple PPP client on this module and get connected to ISP.

Can any one tell me where i am going wrong. Do anyone has a working PPP C
source code which can be used as a study code.

Regards,
Saurabh Mukadam


_______________________________________________
TINI mailing list
TINI-6tN4nzCoH/[email protected]
To UNSUBSCRIBE, edit your profile, or see list archives:
http://lists.dalsemi.com/mailman/listinfo/tini