RE: Need some help with the TINI EVAL Kit

Hi Kris,

Thanks for your reply, here is my code for creating a HTTP client:
*********************************************************************
#include "rom400_dhcp.h"
#include "rom400_sock.h"
#include "rom400_init.h"
#include "rom400_task.h"
#include "tini400_dns.h"
#include "rom400_err.h"
#include <stdio.h>


#define RAM_START 	0x14000
#define RAM_END 	0x5FFFF

void network_config()
{
    unsigned char config[60];
    unsigned int result;
    unsigned int i;
    for (i=0;i<56;i++)
        config[i] = 0;

    result = getnetworkparams(config);
    printf("Network params result: %d\r\n", result);

    printf("IP    : %bu.%bu.%bu.%bu\r\n", config[12], config[13],
config[14], config[15]);
    printf("Subnet: %bu.%bu.%bu.%bu\r\n", config[16], config[17],
config[18], config[19]);
    printf("Prefix: %bu\r\n", config[20]);
    printf("Gate  : %bu.%bu.%bu.%bu\r\n", config[33], config[34],
config[35], config[36]);

}

void main()
{
	unsigned int temp;
	unsigned char result;
	struct hostent* hostresult;
	struct sockaddr socketaddress;
	char* info;
	char buffer[20];
	char buffer2[] = "GET /index.html HTTP/1.0\r\n \r\n"; 
	int handle1;

	init_rom(RAM_START,RAM_END);

	clear_param_buffers();

	dhcp_init();

	result = task_wait(0, FLAG_DHCP_WAIT, 20000);

	temp = dhcp_status();
    	
	switch (temp)
    {
        case DHCP_STATUS_INIT       : printf("DHCP: Init\r\n");
                                      break;
        case DHCP_STATUS_SELECTING  : printf("DHCP: Selecting\r\n");
                                      break;
        case DHCP_STATUS_REQUESTING : printf("DHCP: Requesting\r\n");
                                      break;
        case DHCP_STATUS_INITREBOOT : printf("DHCP: Init reboot\r\n");
                                      break;
        case DHCP_STATUS_REBOOTING  : printf("DHCP: Rebooting\r\n");
                                      break;
        case DHCP_STATUS_BOUND      : printf("DHCP: Bound\r\n");
                                      break;
        case DHCP_STATUS_RENEWING   : printf("DHCP: Renewing\r\n");
                                      break;
        case DHCP_STATUS_REBINDING  : printf("DHCP: Rebinding\r\n");
                                      break;
    }

	network_config();

	printf("Getting IP address for www.google.com\r\n");

	hostresult = gethostbyname("www.google.com");

	info = hostresult->h_addr_list[0];

	if(info == NULL)
	{
		printf("DNS lookup failed.\r\n");
	}
	else
	{

		printf("lenght of address:
%u\r\n",hostresult->h_length);
	
		printf("The IP address is:
%s\r\n",inet_ntop(hostresult->h_addrtype,info,buffer,20));
		
		socketaddress.sin_port = 80;
	
		printf("Setting Socket Port
to:%u\r\n",socketaddress.sin_port);
	
		socketaddress.sin_addr[12] = info[0];
		socketaddress.sin_addr[13] = info[1]; 
		socketaddress.sin_addr[14] = info[2]; 
		socketaddress.sin_addr[15] = info[3];
	 
		printf("creating socket to www.google.com.\r\n");
	
		handle1 = syn_socket(SOCKET_TYPE_STREAM);

		result = connect(handle1,&socketaddress,sizeof(struct
sockaddr));

		printf("%x\r\n",result);
		
		switch(result)
		{
			case ROM400_CONNECTEXCEPTION:
			printf("rom 400 connect exception\r\n");
			break;

			case ROM400_SOCKETEXCEPTION:
			printf("rom 400 socket exception\r\n");
			break;
			
			default:
			printf("unknown error.. connection failed\r\n");
			break;
		}

		
/*		{
			printf("socket creation successful.\r\n");

			printf("Sending a request using GET
command.\r\n");
			syn_send(handle1,sizeof(buffer2),buffer2);
	
*/
			closesocket(handle1);
			
//		 }

	}
    while(1);

}

************************************************************************
***

I am monitoring the communication through ethereal. The DHCP request and
DNS lookup work fine but not the socket creation. Thanks for all your
help. BTW I checked the ROM error codes as you advised and I keep on
getting a ROM 400 CONNECT EXCEPTION. What does this mean?

Sohail

_______________________________________________
TINI mailing list
TINI-6tN4nzCoH/[email protected]
To UNSUBSCRIBE, edit your profile, or see list archives:
http://lists.dalsemi.com/mailman/listinfo/tini