RE: Fwd: External Clock off of m400 and SPI

Chipp,

Verify that you are using the latest version of SPI, included in the modules
of TINI1.12.

Also be sure that both micros share a common ground.

What is the nature of the errors you see?  Have you looked at the signals
with a scope?

> -----Original Message-----
> From: tini-admin-6tN4nzCoH/[email protected] [mailto:tini-admin-6tN4nzCoH/[email protected]]On Behalf Of
> chipp
> Sent: Thursday, May 13, 2004 5:19 PM
> To: TINI-6tN4nzCoH/[email protected]
> Subject: [TINI]Fwd: External Clock off of m400 and SPI
>
>
> Hi TINI List --
>
> 	I'm working on a project with the TINI m400 in trying to get it to
> communicate with a PIC chip via SPI - I've run into a bunch of problems
> trying to maintain a healthy 40 byte transfer between the two of them.
> 	I think that maybe clocking the PIC chip with the TINI's
> clock might
> help in reducing errors and garbage -
>
> 	1. Is there a way to get the clock of the TINI off of the
> m400 module
> (I looked at the pin listing and the only clock looked like RxClk and
> TxClk) ? ? ?
>
> 	2. Has anybody gotten the TINI to talk with a clocked
> micro-controller, (i.e. a PIC)  via SPI (using the SPI Library from
> DalSemi)?  Any example code would be mondo help!
>
> Thanks so much TINI list!
> ~Chipp
>
> _______________________________________________
> TINI mailing list
> TINI-6tN4nzCoH/[email protected]
> To UNSUBSCRIBE, edit your profile, or see list archives:
> http://lists.dalsemi.com/mailman/listinfo/tini

_______________________________________________
TINI mailing list
TINI-6tN4nzCoH/[email protected]
To UNSUBSCRIBE, edit your profile, or see list archives:
http://lists.dalsemi.com/mailman/listinfo/tini