RE: TINI Community Contributions - TINI Proxy 0.3

"Kelly Smith" <[email protected]> Fri, 11 Jun 2004 13:27:26 -0700
Newsgroups gmane.comp.hardware.microcontrollers.tini
Message-ID <[email protected]>
Dear Syd Coppersmith at the TINI Community Contributions (
http://www.ibutton.com/TINI/developers/community.html ),

I would like to contribute my TINI Proxy 0.3, described as:

TINI Proxy is a simple TCP router and diagnostic viewer, intended use is for
Dallas Semiconductor/MAXIM's TINIĀ®, to route incoming TCP requests to an
alternate TINI web servers. Any request incoming on the first TINI's socket
port 80 (one Proxy is started), will re-route to to the second TINI's socket
port 8080, or subsequent additional TINI's at the next available socket
port..

Typical LAN portals/firewalls, allow only one server access via socket port
80, due to NAT (Network Address Translation). When the portal/router has
been assigned a fixed IP address (provided by your ISP; example -
http://66.47.208.241), and you have selected a TINI to lease a DHCP IP
Address, the TINI will be assigned a new IP Address via DHCP that is
translated from the original fixed IP address (example -
http://172.16.1.37). Your portal/firewall must be configured to allow TCP/IP
requests to this particular TINI that sits "behind" the firewall.

If you choose to run a web server on this single TINI, such as Shawn
Silverman's Tynamo, then everything is fine. But if you want to run a second
(or third, forth, fifth, etc.) TINI also listening on socket port 80, we
have a problem!  Remember that the portal/firewall only allows  one server
access via socket port 80.  That's a problem, with an easy "fix".  Configure
your portal/firewall to "listen" on  http://66.47.208.241:80 as well as
http://66.47.208.241:8080.  Then run Proxy on the first TINI, which will
re-route all incoming requests on socket port  80 of the first TINI to
socket port  port 8080 on the second (or more) TINI's.


I sent TINI Proxy 0.3.zip off list to you, and please acknowledge if you
decide to use, it to inform the TINI Developers Community (TINI SIG).

 Thank you in advance, and best regards, Kelly Smith - Email:
[email protected]


_______________________________________________
TINI mailing list
TINI-6tN4nzCoH/[email protected]
To UNSUBSCRIBE, edit your profile, or see list archives:
http://lists.dalsemi.com/mailman/listinfo/tini