Re: Need help on m68k-elf-gdb for GCC 4.1.1

Hi,

you can use gcc-3.4 in connection with bdmtools-1.4 and gdb-6.3. I 
recently compiled m68k-bdm-gdb with these packages and it works on my 
uClinux-2.6.19. GCC-4.1.1 made problems on my systems.

Hope this helps,
Markus

Ken Huang schrieb:
> Hi Greg,
> 
> Thanks for the feedback, the bdm site only contains the BDM driver and
> gdbserver but not the gdb running on the host, if I want to build the
> gdb myself, where is the best place to get pre-build code if any? And
> which version shall I build that would work with the ucLinux 2.6.19 and
> the gcc 4.1.1 tool chain? Any tips on how to build one?
> 
> Thanks,
> 
> Ken
> 
> 
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> On Behalf Of Greg Ungerer
> Sent: Thursday, January 03, 2008 3:54 AM
> To: Ken Huang
> Subject: Re: [ColdFire] Need help on m68k-elf-gdb for GCC 4.1.1
> 
> X-SpamDetect-Info: ------------- Start ASpam results ---------------
> X-SpamDetect-Info: This message may be spam. This message BODY has been
> altered to show you the spam information 
> X-SpamDetect: *****: 5.350000 GreyPassed=1.0, DodgySource=2.0, SPF
> Default Fail=2.5, X-Verify-SMTP present=0.6, Aspam=-0.8
> X-SpamDetect-Info: ------------- End ASpam results -----------------
> 
> 
> Hi Ken,
> 
> Ken Huang wrote:
>> I have successfully built the uClinux support for our M5272 platform
>> based on the "uClinux-dist-20070130" and
>> "m68k-uclinux-tools-20061214.sh" distribution from the uclinux.org.
> But
>> I can't seem to find the m68k-elf-gdb (nor the m68k-bdm-elf-gdb)
> support
>> in the distribution (which is based on GCC 4.1.1 and uCLinux 2.6.19),
>> any one knows where I can get it? or know how to build one from the
>> distribution? 
> 
> A cross m68k-elf-gdb is not included in the pre-built tools.
> You need to get that and build it separately.
> 
> This is probably a good place to start:
> 
>      http://sourceforge.net/projects/bdm/
> 
> Regards
> Greg
> 
> 
> 
> ------------------------------------------------------------------------
> Greg Ungerer  --  Chief Software Dude       EMAIL:     [email protected]
> SnapGear -- a Secure Computing Company      PHONE:       +61 7 3435 2888
> 825 Stanley St,                             FAX:         +61 7 3891 3630
> Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com
> ---
> [email protected]              Send a post to the list.
> [email protected]        Join the list.
> [email protected]    Join the list in digest mode.
> [email protected]     Leave the list.
> 
> ---
> [email protected]              Send a post to the list.
> [email protected]        Join the list.
> [email protected]    Join the list in digest mode.
> [email protected]     Leave the list.
> 
> 

---
[email protected]              Send a post to the list.
[email protected]        Join the list.
[email protected]    Join the list in digest mode.
[email protected]     Leave the list.