Re: Serial connection is garbled at 32MHz

Hi John,

John Bodnar wrote:
> Greg Ungerer wrote:
>> I presume that you mean you are hooking up a 32MHz crytsal to the
>> 5282 chip?
> 
> The 5282 crystal oscillator is specified for 2 to 10 MHz, so it cannot 
> run directly from a 32 MHz crystal.  If you want to run at 32 MHz, the 
> PLL needs to be configured, appropriately, to multiply up some reference 
> between 2 and 10 MHz to the desired frequency.

Ok, thanks John.

So Loren, what is the external clock frequency?
What do you have the PLL setup for?

Regards
Greg


------------------------------------------------------------------------
Greg Ungerer  --  Chief Software Dude       EMAIL:     [email protected]
SnapGear -- a Secure Computing Company      PHONE:       +61 7 3435 2888
825 Stanley St,                             FAX:         +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia         WEB: http://www.SnapGear.com
---
[email protected]              Send a post to the list.
[email protected]        Join the list.
[email protected]    Join the list in digest mode.
[email protected]     Leave the list.