Re: burning flash memory on PB555

You are right, I was referring to the 'Burn ROM' style and not using 
the built in Codewarrior flash programmer. Since I don't have a large 
RAM buffer, I guess I will have to use the built in Codewarrior flash 
programmer. I am not familiar with the Codewarrior flash programmer, 
is it possible for me to still go through debugging with the flash 
programmer?

Lei


--- In [email protected], "murphynetuk" <murphynetuk@y...> wrote:
>
> To clarify, Steve is referring to the built in CodeWarrior flash 
> programmer (which works great) not to the 'Burn ROM' style example 
> projects which _do_ require a RAM buffer as large as the flash code 
> itself.
> 
> Ian
> 
> --- In [email protected], "spw_lotus" <swiggins@l...> wrote:
> >
> > Hi Lei
> > 
> > Codewarrior does not need any more RAM than the 26K, the flash 
> > programming driver is loaded into RAM via BDM and then the code 
> data is 
> > sent and programmed in 'blocks', all handled by codewarrior.
> > 
> > Hope this helps
> > 
> > Regards
> > 
> > Steve
> > --- In [email protected], "coles555" <coles555@y...> wrote:
> > >
> > > Hey guys,
> > > I am trying to program the flash memory on the PB555 but I only 
> have 
> > 26 
> > > Kbytes of RAM space. From what I understand, Metrowerks 
> Codewarrior 
> > > needs a scratch space in the RAM space (RAM Buffer) for burning 
> Flash 
> > > memory. I know that my code surpasses the mere 26 Kbytes RAM 
> space, 
> > > does that mean I can not burn my code into the flash unless I 
get 
> > > larger RAM space?
> > > 
> > > Thanks,
> > > Lei
> > >
> >
>






------------------------ Yahoo! Groups Sponsor --------------------~--> 
Fair play? Video games influencing politics. Click and talk back!
http://us.click.yahoo.com/T8sf5C/tzNLAA/TtwFAA/dN_tlB/TM
--------------------------------------------------------------------~-> 

-----------------------------------------------------------
To learn more about Freescale Microcontrollers, please visit
http://www.freescale.com/mcu


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/MPC500/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/