Programming PB-0555 flash with Codewarrior

I'm using the Codewarrior Flash Programmer with the PB-0555 (MPC555 
with no external memory).  I can use the flash programmer to erase 
and program without codewarrior generating any errors.  However, the 
program does not run when I reset the processor.  I can load my 
Debug target to ram (no problems with that) and examine the flash 
addresses and there is no code there.  I know that I was able to 
erase the flash because the monitor utility that came installed on 
the board is now gone.

Does anyone know what could cause this?  Is it a problem with my 
board, wiggler, or a memory protection issue?  I thought it might be 
my initialization file, which is modified from a phyCORE-MPC565 
project I've been using.  Does anyone have an initialization file 
for the PB-0555 I could look at?

I appreciate any help I can get.  I'm trying to get a basic project 
running for a professor before I leave town in a couple weeks.  He'd 
like to use the 555 as a teaching tool next semester.

Thanks,
Robert





------------------------ Yahoo! Groups Sponsor --------------------~--> 
AIDS in India: A "lurking bomb." Click and help stop AIDS now.
http://us.click.yahoo.com/9QUssC/lzNLAA/TtwFAA/dN_tlB/TM
--------------------------------------------------------------------~-> 

-----------------------------------------------------------
To learn more about Freescale Microcontrollers, please visit
http://www.freescale.com/mcu


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/MPC500/

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/