Re: Volume move.... Working?
Andrew Werchowiecki <[email protected]>
| Newsgroups | gmane.comp.hardware.netapp |
|---|---|
| Message-ID | <[email protected]> |
Mate you have a ~26TB aggregate that has ~1.8TB spare. Just increase the size of the volume by say 200g and immediately start the volume move. The sooner you do this the better off you will be, even though you are close to the limits already you still have some room to move. Leave it any longer and all that space may get eaten up. Go go go do it now. Regards, Andrew On 5/11/19, 8:53 am, "[email protected] on behalf of John Stoffel" <[email protected] on behalf of [email protected]> wrote: Scott> And the underlying aggregate is full too. I guess we relied a Scott> bit too much on thin provisioning and now need to get some Scott> volumes off the full aggregate. This is what scares me about Thin provisioning, because when it does go south, you're in a world of hurt until you can reduce the load somehow. Do you have any snapshots on the other volumes you can delete to make space? Or maybe you have to bite the bullet and add more disks to that Aggregate? Scott> Cluster::> aggr show-space -aggregate-name cluster_03_sata02_8t Scott> Aggregate : cluster_03_sata02_8t Scott> Feature Used Used% Scott> -------------------------------- ---------- ------ Scott> Volume Footprints 25.37TB 100% Scott> Aggregate Metadata 809.8MB 0% Scott> Snapshot Reserve 0B 0% Scott> Total Used 25.37TB 100% Scott> Total Physical Used 24.23TB 96% Scott> [Xpanse logo]<http://www.xpanse.com.au/> Andrew Werchowiecki Technical Team Lead [email protected]<mailto:[email protected]> www.xpanse.com.au<http://www.xpanse.com.au> Mobile: +61 422 702 339 Office: +61 8 9322 6767 Fax: +61 8 9322 6077 85 Havelock St West Perth WA 6005 Australia [Find out more about the NetApp AFF C190]<https://www.netapp.com/us/media/ds-3989.pdf> On Nov 4, 2019, at 12:58 PM, Parisi, Justin <[email protected]> wrote: Scott> Vol move takes a snapshot when doing the move; that's how the transfer happens via snapmirror. Scott> How full is the volume? Scott> ---------------------------------------------------------------------------------------------- Scott> From: Scott Classen <[email protected]> Scott> Sent: Monday, November 4, 2019 3:55 PM Scott> To: Parisi, Justin <[email protected]> Scott> Cc: Toasters <[email protected]> Scott> Subject: Re: Volume move.... Working? Scott> NetApp Security WARNING: This is an external email. Do not click links or open attachments Scott> unless you recognize the sender and know the content is safe. Scott> This volume has snapshots disabled so I’m not sure what the error is referring to. Scott> So it looks like the job is running… maybe I just need to be patient? I just haven’t done any Scott> volume moves (other than when moving to a new filer) so am not sure what to expect in terms of Scott> speediness. Scott> Cluster::> job show -id 11160 Scott> Owning Scott> Job ID Name Vserver Node State Scott> ------ -------------------- ---------- -------------- ---------- Scott> 11160 Volume Move Cluster node-03 Running Scott> Description: Move “bigvol" in Vserver “svm1" to aggregate “cluster_03_sata01_8t" Scott> S >> On Nov 4, 2019, at 12:45 PM, Parisi, Justin <[email protected]> wrote: >> >> If it couldn't create a snapshot, it's probably not doing a vol move. >> >> What does "event log show" say? Job show? >> >> -----Original Message----- >> From: [email protected] <[email protected]> On Behalf Of Scott Scott> Classen >> Sent: Monday, November 4, 2019 3:40 PM >> To: Toasters <[email protected]> >> Subject: Volume move.... Working? >> >> NetApp Security WARNING: This is an external email. Do not click links or open attachments Scott> unless you recognize the sender and know the content is safe. >> >> >> >> >> Hello toasters, >> >> I’m attempting to move a 3TB vol to a new aggregate. The destination aggregate has 100TB Scott> available space. It’s been preparing to transfer for over 3 hours…. Is this normal? >> >> >> >> Cluster::> volume move show -vserver svm1 -volume bigvol >> >> Vserver Name: svm1 >> Volume Name: bigvol >> Actual Completion Time: - >> Bytes Remaining: - >> Destination Aggregate: cluster_03_sata01_8t >> Detailed Status: Volume move job preparing transfer >> Error: Creating Snapshot copy with owner tag: Not enough space for Snapshot tags >> Estimated Time of Completion: - >> Managing Node: node-03 >> Percentage Complete: - >> Move Phase: replicating >> Estimated Remaining Duration: - >> Replication Throughput: - >> Duration of Move: 03:21:53 >> Source Aggregate: cluster_03_sata02_8t >> Start Time of Move: Mon Nov 04 09:10:19 2019 >> Move State: warning >> Is Source Volume Encrypted: false >> Encryption Key ID of Source Volume: >> Is Destination Volume Encrypted: false Encryption Key ID of Destination Volume: >> >> >> >> Should I be concerned about the "Error: Creating Snapshot copy with owner tag: Not enough Scott> space for Snapshot tags” ? >> >> Is there any way to see if this vol move job is hung or actually doing something? >> >> Thanks, >> Scott >> >> >> >> >> >> >> _______________________________________________ >> Toasters mailing list >> [email protected] >> http://www.teaparty.net/mailman/listinfo/toasters Scott> _______________________________________________ Scott> Toasters mailing list Scott> [email protected] Scott> http://www.teaparty.net/mailman/listinfo/toasters _______________________________________________ Toasters mailing list [email protected] http://www.teaparty.net/mailman/listinfo/toasters _______________________________________________ Toasters mailing list [email protected] http://www.teaparty.net/mailman/listinfo/toasters
imageac654c.PNG
(image/png, 2.6 KB) - not displayed
image151e83.JPG
(image/jpeg, 24.5 KB) - not displayed