Re: Volume move.... Working?
Scott Classen <[email protected]>
| Newsgroups | gmane.comp.hardware.netapp |
|---|---|
| Message-ID | <[email protected]> |
Yep. I was able to free up some space on a non-thin provisioned volume, and start the vol move. All good now and things are chugging along at 300MB/s Thanks for the hand holding everyone. Scott > On Nov 4, 2019, at 4:56 PM, Andrew Werchowiecki <[email protected]> wrote: > > Mate you have a ~26TB aggregate that has ~1.8TB spare. Just increase the size of the volume by say 200g and immediately start the volume move. The sooner you do this the better off you will be, even though you are close to the limits already you still have some room to move. Leave it any longer and all that space may get eaten up. > > Go go go do it now. > > Regards, > > Andrew > > On 5/11/19, 8:53 am, "[email protected] <mailto:[email protected]> on behalf of John Stoffel" <[email protected] <mailto:[email protected]> on behalf of [email protected] <mailto:[email protected]>> wrote: > > > Scott> And the underlying aggregate is full too. I guess we relied a > Scott> bit too much on thin provisioning and now need to get some > Scott> volumes off the full aggregate. > > This is what scares me about Thin provisioning, because when it does > go south, you're in a world of hurt until you can reduce the load > somehow. > > Do you have any snapshots on the other volumes you can delete to make > space? Or maybe you have to bite the bullet and add more disks to > that Aggregate? > > > Scott> Cluster::> aggr show-space -aggregate-name cluster_03_sata02_8t > > Scott> Aggregate : cluster_03_sata02_8t > > Scott> Feature Used Used% > Scott> -------------------------------- ---------- ------ > Scott> Volume Footprints 25.37TB 100% > Scott> Aggregate Metadata 809.8MB 0% > Scott> Snapshot Reserve 0B 0% > Scott> Total Used 25.37TB 100% > > Scott> Total Physical Used 24.23TB 96% > > Scott> > > <imageac654c.PNG> <http://www.xpanse.com.au/> Andrew Werchowiecki > Technical Team Lead > [email protected] <mailto:[email protected]> > www.xpanse.com.au <http://www.xpanse.com.au/> > Mobile: +61 422 702 339 > Office: +61 8 9322 6767 > Fax: +61 8 9322 6077 > 85 Havelock St > West Perth > WA 6005 > Australia > <image151e83.JPG> <https://www.netapp.com/us/media/ds-3989.pdf> > On Nov 4, 2019, at 12:58 PM, Parisi, Justin <[email protected]> wrote: > > Scott> Vol move takes a snapshot when doing the move; that's how the transfer happens via snapmirror. > > Scott> How full is the volume? > Scott> ---------------------------------------------------------------------------------------------- > Scott> From: Scott Classen <[email protected]> > Scott> Sent: Monday, November 4, 2019 3:55 PM > Scott> To: Parisi, Justin <[email protected]> > Scott> Cc: Toasters <[email protected]> > Scott> Subject: Re: Volume move.... Working? > > Scott> NetApp Security WARNING: This is an external email. Do not click links or open attachments > Scott> unless you recognize the sender and know the content is safe. > > Scott> This volume has snapshots disabled so I’m not sure what the error is referring to. > > Scott> So it looks like the job is running… maybe I just need to be patient? I just haven’t done any > Scott> volume moves (other than when moving to a new filer) so am not sure what to expect in terms of > Scott> speediness. > > Scott> Cluster::> job show -id 11160 > Scott> Owning > Scott> Job ID Name Vserver Node State > Scott> ------ -------------------- ---------- -------------- ---------- > Scott> 11160 Volume Move Cluster node-03 Running > Scott> Description: Move “bigvol" in Vserver “svm1" to aggregate “cluster_03_sata01_8t" > > Scott> S > > >> On Nov 4, 2019, at 12:45 PM, Parisi, Justin <[email protected]> wrote: > >> > >> If it couldn't create a snapshot, it's probably not doing a vol move. > >> > >> What does "event log show" say? Job show? > >> > >> -----Original Message----- > >> From: [email protected] <[email protected]> On Behalf Of Scott > Scott> Classen > >> Sent: Monday, November 4, 2019 3:40 PM > >> To: Toasters <[email protected]> > >> Subject: Volume move.... Working? > >> > >> NetApp Security WARNING: This is an external email. Do not click links or open attachments > Scott> unless you recognize the sender and know the content is safe. > >> > >> > >> > >> > >> Hello toasters, > >> > >> I’m attempting to move a 3TB vol to a new aggregate. The destination aggregate has 100TB > Scott> available space. It’s been preparing to transfer for over 3 hours…. Is this normal? > >> > >> > >> > >> Cluster::> volume move show -vserver svm1 -volume bigvol > >> > >> Vserver Name: svm1 > >> Volume Name: bigvol > >> Actual Completion Time: - > >> Bytes Remaining: - > >> Destination Aggregate: cluster_03_sata01_8t > >> Detailed Status: Volume move job preparing transfer > >> Error: Creating Snapshot copy with owner tag: Not enough space for Snapshot tags > >> Estimated Time of Completion: - > >> Managing Node: node-03 > >> Percentage Complete: - > >> Move Phase: replicating > >> Estimated Remaining Duration: - > >> Replication Throughput: - > >> Duration of Move: 03:21:53 > >> Source Aggregate: cluster_03_sata02_8t > >> Start Time of Move: Mon Nov 04 09:10:19 2019 > >> Move State: warning > >> Is Source Volume Encrypted: false > >> Encryption Key ID of Source Volume: > >> Is Destination Volume Encrypted: false Encryption Key ID of Destination Volume: > >> > >> > >> > >> Should I be concerned about the "Error: Creating Snapshot copy with owner tag: Not enough > Scott> space for Snapshot tags” ? > >> > >> Is there any way to see if this vol move job is hung or actually doing something? > >> > >> Thanks, > >> Scott > >> > >> > >> > >> > >> > >> > >> _______________________________________________ > >> Toasters mailing list > >> [email protected] > >> http://www.teaparty.net/mailman/listinfo/toasters > > Scott> _______________________________________________ > Scott> Toasters mailing list > Scott> [email protected] > Scott> http://www.teaparty.net/mailman/listinfo/toasters > > _______________________________________________ > Toasters mailing list > [email protected] <mailto:[email protected]> > http://www.teaparty.net/mailman/listinfo/toasters <http://www.teaparty.net/mailman/listinfo/toasters> _______________________________________________ Toasters mailing list [email protected] http://www.teaparty.net/mailman/listinfo/toasters