Re: Volume move.... Working?

"John Stoffel" <[email protected]>
Newsgroups gmane.comp.hardware.netapp
Message-ID <[email protected]>
Scott> Yep. I was able to free up some space on a non-thin provisioned
Scott> volume, and start the vol move.  All good now and things are
Scott> chugging along at 300MB/s Thanks for the hand holding everyone.

Glad to help, just paying forward all the help I've gotten here over
the years...  


Scott>     On Nov 4, 2019, at 4:56 PM, Andrew Werchowiecki <[email protected]> wrote:
   
Scott>     Mate you have a ~26TB aggregate that has ~1.8TB spare. Just increase the size of the volume by
Scott>     say 200g and immediately start the volume move. The sooner you do this the better off you will
Scott>     be, even though you are close to the limits already you still have some room to move. Leave it
Scott>     any longer and all that space may get eaten up.
   
Scott>     Go go go do it now.
   
Scott>     Regards,
   
Scott>     Andrew
   
Scott>     On 5/11/19, 8:53 am, "[email protected] on behalf of John Stoffel" <
Scott>     [email protected] on behalf of [email protected]> wrote:

Scott> And the underlying aggregate is full too. I guess we relied a
Scott> bit too much on thin provisioning and now need to get some
Scott> volumes off the full aggregate.
   
Scott>        This is what scares me about Thin provisioning, because when it does
Scott>        go south, you're in a world of hurt until you can reduce the load
Scott>        somehow.
   
Scott>        Do you have any snapshots on the other volumes you can delete to make
Scott>        space?  Or maybe you have to bite the bullet and add more disks to
Scott>        that Aggregate?

Scott> Cluster::> aggr show-space -aggregate-name cluster_03_sata02_8t
   
Scott> Aggregate : cluster_03_sata02_8t
   
Scott> Feature                                          Used      Used%
Scott> --------------------------------           ----------     ------
Scott> Volume Footprints                             25.37TB       100%
Scott> Aggregate Metadata                            809.8MB         0%
Scott> Snapshot Reserve                                   0B         0%
Scott> Total Used                                    25.37TB       100%
   
Scott> Total Physical Used                           24.23TB        96%
   
Scott> 
   
Scott>                       Andrew Werchowiecki               Mobile: +61 422 702 339 85 Havelock St
Scott>     <imageac654c.PNG> Technical Team Lead               Office: +61 8 9322 6767 West Perth    
Scott>                       [email protected] Fax:    +61 8 9322 6077 WA 6005       
Scott>                       www.xpanse.com.au                                         Australia     
Scott>     <image151e83.JPG>                                                                         
   
Scott>     On Nov 4, 2019, at 12:58 PM, Parisi, Justin <[email protected]> wrote:
   
Scott> Vol move takes a snapshot when doing the move; that's how the transfer happens
Scott>     via snapmirror.
   
Scott> How full is the volume?
Scott> 
Scott>         ----------------------------------------------------------------------------------------------
Scott> From: Scott Classen <[email protected]>
Scott> Sent: Monday, November 4, 2019 3:55 PM
Scott> To: Parisi, Justin <[email protected]>
Scott> Cc: Toasters <[email protected]>
Scott> Subject: Re: Volume move.... Working?
   
Scott> NetApp Security WARNING: This is an external email. Do not click links or open
Scott>     attachments
Scott> unless you recognize the sender and know the content is safe.
   
Scott> This volume has snapshots disabled so I’m not sure what the error is referring
Scott>     to.
   
Scott> So it looks like the job is running… maybe I just need to be patient? I just
Scott>     haven’t done any
Scott> volume moves (other than when moving to a new filer) so am not sure what to
Scott>     expect in terms of
Scott> speediness.
   
Scott> Cluster::> job show -id 11160
Scott> Owning
Scott> Job ID Name                 Vserver    Node           State
Scott> ------ -------------------- ---------- -------------- ----------
Scott> 11160  Volume Move          Cluster    node-03     Running
Scott> Description: Move “bigvol" in Vserver “svm1" to aggregate
Scott>     “cluster_03_sata01_8t"
   
Scott> S
   
>>> On Nov 4, 2019, at 12:45 PM, Parisi, Justin <[email protected]> wrote:
>>> 
>>> If it couldn't create a snapshot, it's probably not doing a vol move.
>>> 
>>> What does "event log show" say? Job show?
>>> 
>>> -----Original Message-----
>>> From: [email protected] <[email protected]> On Behalf Of Scott
Scott> Classen
>>> Sent: Monday, November 4, 2019 3:40 PM
>>> To: Toasters <[email protected]>
>>> Subject: Volume move.... Working?
>>> 
>>> NetApp Security WARNING: This is an external email. Do not click links or open
Scott>     attachments
Scott> unless you recognize the sender and know the content is safe.
>>> 
>>> 
>>> 
>>> 
>>> Hello toasters,
>>> 
>>> I’m attempting to move a 3TB vol to a new aggregate. The destination aggregate has 100TB
Scott> available space. It’s been preparing to transfer for over 3 hours…. Is this
Scott>     normal?
>>> 
>>> 
>>> 
>>> Cluster::> volume move show -vserver svm1 -volume bigvol
>>> 
>>> Vserver Name: svm1
>>> Volume Name: bigvol
>>> Actual Completion Time: -
>>> Bytes Remaining: -
>>> Destination Aggregate: cluster_03_sata01_8t
>>> Detailed Status: Volume move job preparing transfer
>>> Error: Creating Snapshot copy with owner tag: Not enough space for Snapshot tags
>>> Estimated Time of Completion: -
>>> Managing Node: node-03
>>> Percentage Complete: -
>>> Move Phase: replicating
>>> Estimated Remaining Duration: -
>>> Replication Throughput: -
>>> Duration of Move: 03:21:53
>>> Source Aggregate: cluster_03_sata02_8t
>>> Start Time of Move: Mon Nov 04 09:10:19 2019
>>> Move State: warning
>>> Is Source Volume Encrypted: false
>>> Encryption Key ID of Source Volume:
>>> Is Destination Volume Encrypted: false Encryption Key ID of Destination Volume:
>>> 
>>> 
>>> 
>>> Should I be concerned about the "Error: Creating Snapshot copy with owner tag: Not
Scott>     enough
Scott> space for Snapshot tags” ?
>>> 
>>> Is there any way to see if this vol move job is hung or actually doing something?
>>> 
>>> Thanks,
>>> Scott
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> Toasters mailing list
>>> [email protected]
>>> http://www.teaparty.net/mailman/listinfo/toasters
   
Scott> _______________________________________________
Scott> Toasters mailing list
Scott> [email protected]
Scott> http://www.teaparty.net/mailman/listinfo/toasters
   
Scott>        _______________________________________________
Scott>        Toasters mailing list
Scott>        [email protected]
Scott>        http://www.teaparty.net/mailman/listinfo/toasters


_______________________________________________
Toasters mailing list
[email protected]
http://www.teaparty.net/mailman/listinfo/toasters
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.