Re: statistics show-periodic

Just checked on my 9.7p4 sim:

statistics show-periodic in general seems to be broken. Whatever the 
counters, whether in Adv or Diag mode it can't find the command and 
gives the exact error Mike mentioned.

I checked Bugs Online and the only Bug that's show-periodic related was
https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/1307631

(Apparently still in 9.7p10 and fixed in p11)


My 2c


Sebastian


On 22.10.2021 08:40, Potocky Miroslav wrote:
>
> Seems to work fine on 9.7P11. Maybe a more recent change?
>
> XXXX::> set -privilege advanced
>
> Warning: These advanced commands are potentially dangerous; use them 
> only when directed to do so by NetApp personnel.
> Do you want to continue? {y|n}: y
>
> XXXX::*>  statistics show-periodic -counter 
> total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
> XXXX: cluster.cluster: 10/22/2021 08:36:25
>     total    total     data     data cluster  cluster  cluster
>      recv     sent     recv     sent    busy     recv     sent
>  -------- -------- -------- -------- ------- -------- --------
>    2.91GB   4.08GB    735MB   2.09GB     51%   2.19GB   1.99GB
>    3.19GB   4.79GB    836MB   2.34GB     40%   2.37GB   2.44GB
> XXXX: cluster.cluster: 10/22/2021 08:36:30
>     total    total     data     data cluster  cluster  cluster
>      recv     sent     recv     sent    busy     recv     sent
>  -------- -------- -------- -------- ------- -------- --------
> Minimums:
>    2.91GB   4.08GB    735MB   2.09GB     40%   2.19GB   1.99GB
> Averages for 2 samples:
>    3.05GB   4.43GB    786MB   2.22GB     45%   2.28GB   2.22GB
> Maximums:
>    3.19GB   4.79GB    836MB   2.34GB     51%   2.37GB   2.44GB
>
>
> XXXX::*> version
> NetApp Release 9.7P11: Tue Jan 12 23:00:49 UTC 2021
>
> Regards,
> MP
> On 22. 10. 2021 7:48, Mike Thompson wrote:
>>
>> can't seem to get this to work on a 9.7 box.   works fine on 9.3
>>
>> am I missing something obvious?
>>
>> pd-san2::*> set -privilege advanced
>>
>> pd-san2::*> statistics show-periodic -counter 
>> total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
>>
>> Error: command failed: entry doesn't exist
>>
>> pd-san2::*> set -privilege diag
>>
>> Warning: These diagnostic commands are for use by NetApp personnel only.
>> Do you want to continue? {y|n}: y
>>
>> pd-san2::*> statistics show-periodic -counter 
>> total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
>>
>> Error: command failed: entry doesn't exist
>>
>> pd-san2::*> version
>> NetApp Release 9.7P13: Thu Apr 15 02:06:46 UTC 2021
>>
>> _______________________________________________
>> Toasters mailing list
>> [email protected]
>> https://www.teaparty.net/mailman/listinfo/toasters
>
> _______________________________________________
> Toasters mailing list
> [email protected]
> https://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________
Toasters mailing list
[email protected]
https://www.teaparty.net/mailman/listinfo/toasters