Re: How to make a swapfile
"BJ Johns" <[email protected]>
| Newsgroups | gmane.comp.hardware.roku.technical |
|---|---|
| Message-ID | <[email protected]> |
Step #1 of my the instructions on my Setup page....(My assumptions are that you are doing this on a DOS machine connected to the same network as your Roku. I have no idea how to do this on Apple machine)... http://home.earthlink.net/~weathersix/setup.htm Step 1 - Run the Telnet application to connect to the HD1000. To do this, open a DOS window and at the DOS prompt, type in 'telnet' followed by a space and then the IP address for your HD1000. The IP address is found at the top of the screen when you go into Setup mode on the HD1000. For example... C:/>telnet 192.168.8.17 You should then see something like the following... (none) login: -BJ "Peter Kirkpatrick" <[email protected]> wrote in message news:[email protected]... > BJ Johns <hjohns1 <at> ix.netcom.com> writes: > > > > Let me know if this is detailed enough and if there is anything that needs > > to be explained more. > > > > -BJ Johns > > How do I telnet in?