CVS: msp430-libc/include msp430x20x1.h,NONE,1.1 msp430x20x2.h,NONE,1.1 msp430x20x3.h,NONE,1.1

Steve Underwood <[email protected]>
Newsgroups gmane.comp.hardware.texas-instruments.msp430.gcc.cvs
Message-ID <[email protected]> 
Update of /cvsroot/mspgcc/msp430-libc/include
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv21360/msp430-libc/include

Added Files:
	msp430x20x1.h msp430x20x2.h msp430x20x3.h 
Log Message:
New 20xx devices, the new USI module,  and a couple of fixes


--- NEW FILE: msp430x20x1.h ---
#ifndef __msp430x20x1
#define __msp430x20x1

/* msp430x20x1.h
 *
 * mspgcc project: MSP430 device headers
 * MSP430x20x1 family header
 *
 * (c) 2005 by Steve Underwood <[email protected]>
 * Originally based in part on work by Texas Instruments Inc.
 *
 * $Id: msp430x20x1.h,v 1.1 2005/10/02 13:27:30 coppice Exp $
 */

#include <iomacros.h>

#define __MSP430_HAS_WDT__
#define __MSP430_HAS_PORT1_R__
#define __MSP430_HAS_PORT2_R__
#define __MSP430_HAS_TA2__
#define __MSP430_HAS_BC2__
#define __MSP430_HAS_FLASH2__
#define __MSP430_HAS_CAPLUS__

#define __msp430_have_port1
#define __msp430_have_port2
#define __msp430_have_compa_extended mux
#define __msp430_have_flash_extra_flags

#include <msp430/basic_clock.h>
#include <msp430/flash.h>
#include <msp430/eprom.h>
#include <msp430/timera.h>
#include <msp430/gpio.h>
#include <msp430/compa.h>

#include <msp430/common.h>

#define IE1_                0x0000  /* Interrupt Enable 1 */
sfrb(IE1,IE1_);
#define WDTIE               (1<<0)
#define OFIE                (1<<1)
#define NMIIE               (1<<4)
#define ACCVIE              (1<<5)

#define IFG1_               0x0002  /* Interrupt Flag 1 */
sfrb(IFG1,IFG1_);
#define WDTIFG              (1<<0)
#define OFIFG               (1<<1)
#define NMIIFG              (1<<4)

/************************************************************
* Calibration Data in Info Mem
************************************************************/

#ifndef __DisableCalData

#define CALDCO_16MHZ_         0x10F8    /* DCOCTL  Calibration Data for 16MHz */
sfrb(CALDCO_16MHZ, CALDCO_16MHZ_)
#define CALBC1_16MHZ_         0x10F9    /* BCSCTL1 Calibration Data for 16MHz */
sfrb(CALBC1_16MHZ, CALBC1_16MHZ_)
#define CALDCO_12MHZ_         0x10FA    /* DCOCTL  Calibration Data for 12MHz */
sfrb(CALDCO_12MHZ, CALDCO_12MHZ_)
#define CALBC1_12MHZ_         0x10FB    /* BCSCTL1 Calibration Data for 12MHz */
sfrb(CALBC1_12MHZ, CALBC1_12MHZ_)
#define CALDCO_8MHZ_          0x10FC    /* DCOCTL  Calibration Data for 8MHz */
sfrb(CALDCO_8MHZ, CALDCO_8MHZ_)
#define CALBC1_8MHZ_          0x10FD    /* BCSCTL1 Calibration Data for 8MHz */
sfrb(CALBC1_8MHZ, CALBC1_8MHZ_)
#define CALDCO_1MHZ_          0x10FE    /* DCOCTL  Calibration Data for 1MHz */
sfrb(CALDCO_1MHZ, CALDCO_1MHZ_)
#define CALBC1_1MHZ_          0x10FF    /* BCSCTL1 Calibration Data for 1MHz */
sfrb(CALBC1_1MHZ, CALBC1_1MHZ_)

#endif /* #ifndef __DisableCalData */

#define PORT1_VECTOR        4           /* 0xFFE4 Port 1 */
#define PORT2_VECTOR        6           /* 0xFFE6 Port 2 */
#define TIMERA1_VECTOR      16          /* 0xFFF0 Timer A CC1-2, TA */
#define TIMERA0_VECTOR      18          /* 0xFFF2 Timer A CC0 */
#define WDT_VECTOR          20          /* 0xFFF4 Watchdog Timer */
#define COMPARATORA_VECTOR  22          /* 0xFFF6 Comparator A */
#define NMI_VECTOR          28          /* 0xFFFC Non-maskable */

#endif /* #ifndef __msp430x20x1 */

--- NEW FILE: msp430x20x2.h ---
#ifndef __msp430x20x2
#define __msp430x20x2

/* msp430x20x2.h
 *
 * mspgcc project: MSP430 device headers
 * MSP430x20x2 family header
 *
 * (c) 2005 by Steve Underwood <[email protected]>
 * Originally based in part on work by Texas Instruments Inc.
 *
 * $Id: msp430x20x2.h,v 1.1 2005/10/02 13:27:30 coppice Exp $
 */

#include <iomacros.h>

#define __MSP430_HAS_WDT__
#define __MSP430_HAS_PORT1_R__
#define __MSP430_HAS_PORT2_R__
#define __MSP430_HAS_TA2__
#define __MSP430_HAS_BC2__
#define __MSP430_HAS_FLASH2__
#define __MSP430_HAS_ADC10__
#define __MSP430_HAS_USI__

#define __msp430_have_port1
#define __msp430_have_port2
#define __msp430_have_flash_extra_flags

#include <msp430/basic_clock.h>
#include <msp430/flash.h>
#include <msp430/eprom.h>
#include <msp430/timera.h>
#include <msp430/gpio.h>
#include <msp430/adc10.h>
#include <msp430/usi.h>

#include <msp430/common.h>

#define IE1_                0x0000  /* Interrupt Enable 1 */
sfrb(IE1,IE1_);
#define WDTIE               (1<<0)
#define OFIE                (1<<1)
#define NMIIE               (1<<4)
#define ACCVIE              (1<<5)

#define IFG1_               0x0002  /* Interrupt Flag 1 */
sfrb(IFG1,IFG1_);
#define WDTIFG              (1<<0)
#define OFIFG               (1<<1)
#define NMIIFG              (1<<4)

/************************************************************
* Calibration Data in Info Mem
************************************************************/

#ifndef __DisableCalData

#define CALDCO_16MHZ_         0x10F8    /* DCOCTL  Calibration Data for 16MHz */
sfrb(CALDCO_16MHZ, CALDCO_16MHZ_)
#define CALBC1_16MHZ_         0x10F9    /* BCSCTL1 Calibration Data for 16MHz */
sfrb(CALBC1_16MHZ, CALBC1_16MHZ_)
#define CALDCO_12MHZ_         0x10FA    /* DCOCTL  Calibration Data for 12MHz */
sfrb(CALDCO_12MHZ, CALDCO_12MHZ_)
#define CALBC1_12MHZ_         0x10FB    /* BCSCTL1 Calibration Data for 12MHz */
sfrb(CALBC1_12MHZ, CALBC1_12MHZ_)
#define CALDCO_8MHZ_          0x10FC    /* DCOCTL  Calibration Data for 8MHz */
sfrb(CALDCO_8MHZ, CALDCO_8MHZ_)
#define CALBC1_8MHZ_          0x10FD    /* BCSCTL1 Calibration Data for 8MHz */
sfrb(CALBC1_8MHZ, CALBC1_8MHZ_)
#define CALDCO_1MHZ_          0x10FE    /* DCOCTL  Calibration Data for 1MHz */
sfrb(CALDCO_1MHZ, CALDCO_1MHZ_)
#define CALBC1_1MHZ_          0x10FF    /* BCSCTL1 Calibration Data for 1MHz */
sfrb(CALBC1_1MHZ, CALBC1_1MHZ_)

#endif /* #ifndef __DisableCalData */

#define PORT1_VECTOR        4           /* 0xFFE4 Port 1 */
#define PORT2_VECTOR        6           /* 0xFFE6 Port 2 */
#define USI_VECTOR          8           /* 0xFFE8 USI */
#define ADC10_VECTOR        10          /* 0xFFEA ADC10 */
#define TIMERA1_VECTOR      16          /* 0xFFF0 Timer A CC1-2, TA */
#define TIMERA0_VECTOR      18          /* 0xFFF2 Timer A CC0 */
#define WDT_VECTOR          20          /* 0xFFF4 Watchdog Timer */
#define NMI_VECTOR          28          /* 0xFFFC Non-maskable */

#endif /* #ifndef __msp430x20x2 */

--- NEW FILE: msp430x20x3.h ---
#ifndef __msp430x20x3
#define __msp430x20x3

/* msp430x20x3.h
 *
 * mspgcc project: MSP430 device headers
 * MSP430x20x3 family header
 *
 * (c) 2005 by Steve Underwood <[email protected]>
 * Originally based in part on work by Texas Instruments Inc.
 *
 * $Id: msp430x20x3.h,v 1.1 2005/10/02 13:27:30 coppice Exp $
 */

#include <iomacros.h>

#define __MSP430_HAS_WDT__
#define __MSP430_HAS_PORT1_R__
#define __MSP430_HAS_PORT2_R__
#define __MSP430_HAS_TA2__
#define __MSP430_HAS_BC2__
#define __MSP430_HAS_FLASH2__
#define __MSP430_HAS_SD16_1__
#define __MSP430_HAS_USI__

#define __msp430_have_port1
#define __msp430_have_port2
#define __msp430_have_flash_extra_flags

#include <msp430/basic_clock.h>
#include <msp430/flash.h>
#include <msp430/eprom.h>
#include <msp430/timera.h>
#include <msp430/gpio.h>
#include <msp430/sd16.h>
#include <msp430/usi.h>

#include <msp430/common.h>

#define IE1_                0x0000  /* Interrupt Enable 1 */
sfrb(IE1,IE1_);
#define WDTIE               (1<<0)
#define OFIE                (1<<1)
#define NMIIE               (1<<4)
#define ACCVIE              (1<<5)

#define IFG1_               0x0002  /* Interrupt Flag 1 */
sfrb(IFG1,IFG1_);
#define WDTIFG              (1<<0)
#define OFIFG               (1<<1)
#define NMIIFG              (1<<4)

/************************************************************
* Calibration Data in Info Mem
************************************************************/

#ifndef __DisableCalData

#define CALDCO_16MHZ_         0x10F8    /* DCOCTL  Calibration Data for 16MHz */
sfrb(CALDCO_16MHZ, CALDCO_16MHZ_)
#define CALBC1_16MHZ_         0x10F9    /* BCSCTL1 Calibration Data for 16MHz */
sfrb(CALBC1_16MHZ, CALBC1_16MHZ_)
#define CALDCO_12MHZ_         0x10FA    /* DCOCTL  Calibration Data for 12MHz */
sfrb(CALDCO_12MHZ, CALDCO_12MHZ_)
#define CALBC1_12MHZ_         0x10FB    /* BCSCTL1 Calibration Data for 12MHz */
sfrb(CALBC1_12MHZ, CALBC1_12MHZ_)
#define CALDCO_8MHZ_          0x10FC    /* DCOCTL  Calibration Data for 8MHz */
sfrb(CALDCO_8MHZ, CALDCO_8MHZ_)
#define CALBC1_8MHZ_          0x10FD    /* BCSCTL1 Calibration Data for 8MHz */
sfrb(CALBC1_8MHZ, CALBC1_8MHZ_)
#define CALDCO_1MHZ_          0x10FE    /* DCOCTL  Calibration Data for 1MHz */
sfrb(CALDCO_1MHZ, CALDCO_1MHZ_)
#define CALBC1_1MHZ_          0x10FF    /* BCSCTL1 Calibration Data for 1MHz */
sfrb(CALBC1_1MHZ, CALBC1_1MHZ_)

#endif /* #ifndef __DisableCalData */

#define PORT1_VECTOR        4           /* 0xFFE4 Port 1 */
#define PORT2_VECTOR        6           /* 0xFFE6 Port 2 */
#define USI_VECTOR          8           /* 0xFFE8 USI */
#define SD16_VECTOR         10          /* 0xFFEA Sigma Delta ADC */
#define TIMERA1_VECTOR      16          /* 0xFFF0 Timer A CC1-2, TA */
#define TIMERA0_VECTOR      18          /* 0xFFF2 Timer A CC0 */
#define WDT_VECTOR          20          /* 0xFFF4 Watchdog Timer */
#define NMI_VECTOR          28          /* 0xFFFC Non-maskable */

#endif /* #ifndef __msp430x20x3 */



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.