Re: MSP-FET430UIF and mspdebug

Hi Safraz,

I use the MSP-FET430UIF here and it has as resetable fuse (which I happen
to blow every once in a while) :-)
By resetable I mean that once the FET shuts down, just quickly unplug it
from USB and try again.

Best,
Valentin


On Tue, Mar 4, 2014 at 9:29 PM, Sarfraz Nawaz <[email protected]> wrote:

> Hi Daniel,
>
> I thought about it but the board probably requires more than the 60mA
> that FET can source, so I decided against it. Do you know if there is
> protection available on FET against larger source currents?
>
> Thanks
>
> On Tue, Mar 4, 2014 at 8:20 PM, Daniel Beer <[email protected]> wrote:
> > On Tue, Mar 04, 2014 at 11:11:58AM +0000, Sarfraz Nawaz wrote:
> >> It is an evaluation board that is powered by a small Lithium polymer
> >> battery with a 3V regulator. I have checked that pin number 4 of the
> >> 14-pin JTAG connector is at 3V with the FET cable connected to the
> >> board but I still get the same error. Any ideas where I should look
> >> next please? Thanks.
> >
> > Hi Sarfraz,
> >
> > Have you tried debugging with the board powered by the FET, rather than
> > the battery?
> >
> > Cheers,
> > Daniel
> >
> > --
> > Daniel Beer <[email protected]>    www.dlbeer.co.nz
> > IRC: inittab (Freenode)    PGP key: 2048D/160A553B
>
>
> ------------------------------------------------------------------------------
> Subversion Kills Productivity. Get off Subversion & Make the Move to
> Perforce.
> With Perforce, you get hassle-free workflows. Merge that actually works.
> Faster operations. Version large binaries.  Built-in WAN optimization and
> the
> freedom to use Git, Perforce or both. Make the move to Perforce.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk
> _______________________________________________
> Mspgcc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
>



-- 
Valentin Sawadski
Founder & Embedded Software

Tel.: +49 - (0) 89 - 416 15 66 4 - 5
Fax: +49 - (0) 89 - 416 15 66 4 - 9
Mobil: +49 - (0) 162 - 460 163 4


facebook.com/tado<http://www.google.com/url?q=http%3A%2F%2Ffacebook.com%2Ftado&sa=D&sntz=1&usg=AFrqEzcXsXBuNZnoI7i7O22YPtGSE1LCVg>
 | twitter.com/tado<http://www.google.com/url?q=http%3A%2F%2Ftwitter.com%2Ftado&sa=D&sntz=1&usg=AFrqEzeG-3hEUnpKEGOrasN1nAT7-QJXPA>
|
youtube.com/tado

<http://www.google.com/url?q=http%3A%2F%2Fwww.tado.com%2F&sa=D&sntz=1&usg=AFrqEzdlGA-41vPiKHbUfSyHgdnCwXCWcA>

www.tado.com<http://www.google.com/url?q=http%3A%2F%2Fwww.tado.com%2F&sa=D&sntz=1&usg=AFrqEzdlGA-41vPiKHbUfSyHgdnCwXCWcA>|
tado° GmbH | Lindwurmstr. 76 | 80337 Munich | Germany

Managing Directors: Christian Deilmann | Johannes Schwarz | Leopold v.
Bismarck
Registered with the Commercial Register Munich as HRB 194769 B | VAT-No: DE
280012558

------------------------------------------------------------------------------
Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce.
With Perforce, you get hassle-free workflows. Merge that actually works. 
Faster operations. Version large binaries.  Built-in WAN optimization and the
freedom to use Git, Perforce or both. Make the move to Perforce.
http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk

_______________________________________________
Mspgcc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mspgcc-users