Re: [GIMP dok] maleværktøjer del 2 til gennemlæsn ing (ca. 160)

Hej Ask,

Tak for gennemlæsningen. Rettet uden kommentarer.

Mvh
Alan

Den fre. 26. apr. 2024 kl. 14.48 skrev Ask Hjorth Larsen <
[email protected]>:

>
> #: src/toolbox/paint/heal.xml:25(para)
> msgid ""
> "This tool was once described as <quote>The healing brush looks like a
> smart "
> "clone tool on steroids</quote>. And indeed the Healing Tool is a close "
> "relative to the Clone Tool, but it is more smart to remove small failures
> in "
> "images. A typical usage is the removal of wrinkles in photographs. To do
> so, "
> "pixels are not simply copied from source to destination, but the area
> around "
> "the destination is taken into account before cloning is applied. The "
> "algorithm used for this, is described in a scientific paper by Todor "
> "Georgiev <xref linkend=\"bibliography-online-georgiev\"/>."
> msgstr ""
> "Dette værktøj blev engang beskrevet som <citat>Reparationspenslen ligner
> et "
> "smart kloningsværktøj på steroider</citat>. Og værktøjet Reparation er "
> "faktisk en nær slægtning til værktøjet Kloning, men det er mere smart,
> når "
> "der skal fjernes små fejl i billeder. En typisk anvendelse er fjernelse
> af "
> "rynker i fotografier. For at gøre det kopieres pixels ikke bare fra
> kilden "
> "til målet, men området omkring målet tages i betragtning, før kloningen "
> "anvendes. Den algoritme, der bruges til dette, er beskrevet i en "
> "videnskabelig artikel af Todor Georgiev <xref
> linkend=\"bibliography-online-"
> "georgiev\"/>."
>
> #: src/toolbox/paint/heal.xml:36(para)
> msgid ""
> "To use it, first choose a brush with a size adapted to the defect. Then "
> "<keycap>Ctrl</keycap>-click on the area you want to reproduce. Release
> the "
> "<keycap>Ctrl</keycap> key and drag the sample to the defect. Click. If
> the "
> "defect is slight, not very different from its surrounding, it will be "
> "corrected as soon. Else, you can correct it with repeated clicks, but
> with a "
> "risk of daubing."
> msgstr ""
> "or at bruge den skal du først vælge en pensel med en størrelse, der
> passer "
> "til defekten. Derefter <keycap>Ctrl</keycap>-klikker du på det område, du
> "
> "vil gengive. Slip <keycap>Ctrl</keycap>-tasten, og træk prøven hen til "
> "defekten. Klik her. Hvis defekten er lille og ikke adskiller sig meget
> fra "
> "omgivelserne, vil den blive rettet så hurtigt som muligt. Ellers kan du "
> "rette den med gentagne klik, men med risiko for at klatte."
>
> #: src/toolbox/paint/heal.xml:52(para)
> msgid ""
> "From the image-menu:
> <menuchoice><guimenu>Tools</guimenu><guisubmenu>Paint "
> "tools</guisubmenu><guimenuitem>Heal</guimenuitem></menuchoice>."
> msgstr ""
> "I billedmenuen: <menuchoice><guimenu>Værktøjer</"
> "guimenu><guisubmenu>Maleværktøjer</guisubmenu><guimenuitem>Reparation</"
> "guimenuitem></menuchoice>."
>
> #: src/toolbox/paint/heal.xml:62(para)
> msgid ""
> "By clicking the tool icon <guiicon><inlinegraphic
> fileref=\"images/toolbox/"
> "stock-tool-heal-22.png\"/></guiicon> in the Toolbox."
> msgstr ""
> "Ved at klikke på værktøjets ikon <guiicon><inlinegraphic
> fileref=\"images/"
> "toolbox/stock-tool-heal-22.png\"/></guiicon> i Værktøjskassen."
>
> #: src/toolbox/paint/heal.xml:71(para)
> msgid "By pressing the <keycap>H</keycap> keyboard shortcut."
> msgstr "Ved at bruge tastaturgenvejen <keycap>H</keycap>."
>
> #: src/toolbox/paint/heal.xml:86(para)
> msgid ""
> "The <keycap>Ctrl</keycap> key is used to select the source. You can heal "
> "from any layer of any image, by clicking on the image display, with the "
> "<keycap>Ctrl</keycap> key held down, while the layer is active (as shown
> in "
> "the Layers dialog). If Alignment is set to <quote>Non-aligned</quote> or "
> "<quote>Aligned</quote> in Tool Options, then the point you click on
> becomes "
> "the origin for healing: the image data at that point will be used when
> you "
> "first begin painting with the Heal tool. In source-selection mode, the "
> "cursor changes to a crosshair-symbol."
> msgstr ""
> "<keycap>Ctrl</keycap>-tasten bruges til at vælge kilden. Du kan reparere
> fra "
> "ethvert lag i ethvert billede ved at klikke på billedvisningen med "
> "<keycap>Ctrl</keycap>-tasten nede, mens laget er aktivt (som vist i
> dialogen "
> "Lag). Hvis Justering er indstillet til <quote>Ingen</quote> eller "
> "<quote>Justeret</quote> i Værktøjsindstillinger, bliver det punkt, du "
> "klikker på, udgangspunktet for reparation: Billeddataene i det punkt vil "
> "blive brugt, når du første gang begynder at male med Reparation. I "
> "kildevalgstilstand ændres markøren til et trådkorssymbol."
>
> #: src/toolbox/paint/heal.xml:105(para)
> msgid ""
> "Once the source is set, if you press this key, you will see a thin line "
> "connecting the previously clicked point with the current pointer
> location. "
> "If you click again, while going on holding the <keycap>Shift</keycap> key
> "
> "down, the tool will <quote>heal</quote> along this line."
> msgstr ""
> "Når kilden er indstillet, vil du, hvis du trykker på denne tast, se en
> tynd "
> "linje, der forbinder det tidligere klikkede punkt med den aktuelle "
> "markørplacering. Hvis du klikker igen, mens du fortsat holder
> <keycap>Skift</"
> "keycap> nede, vil værktøjet <quote>reparere</quote> langs denne linje."
>
> #: src/toolbox/paint/gradient.xml:33(para)
> msgid ""
> "There are an astonishing number of things you can do with this tool, and
> the "
> "possibilities may seem a bit overwhelming at first. The two most
> important "
> "options you have are the Gradient and the Shape. Clicking the Gradient "
> "button in the tool options brings up a Gradient Select window, allowing
> you "
> "to choose from among a variety of gradients supplied with GIMP; you can
> also "
> "construct and save custom gradients. Further information about gradients
> can "
> "be found in <xref linkend=\"gimp-concepts-gradients\"/> and <xref "
> "linkend=\"gimp-gradient-dialog\"/>."
> msgstr ""
> "Der er forbløffende mange ting, du kan gøre med dette værktøj, og "
> "mulighederne kan virke lidt overvældende i starten. De to vigtigste "
> "muligheder, du har, er farveovergangen og formen. Klikkes på "
> "Farveovergangsknappen i værktøjsindstillingerne dukker et vindue op, hvor
> du "
> "kan vælge mellem en række farveovergange, der følger med GIMP. Du kan
> også "
> "konstruere og gemme brugerdefinerede farveovergange. Yderligere
> oplysninger "
> "om farveovergange kan findes i <xref
> linkend=\"gimp-concepts-gradients\"/> "
> "og <xref linkend=\"gimp-gradient-dialog\"/>."
>
> #: src/toolbox/paint/gradient.xml:44(para)
> msgid ""
> "For Shape, there are 11 options: Linear, Bilinear, Radial, Square,
> Conical "
> "(symmetric), Conical (asymmetric), Shaped (angular), Shaped (spherical), "
> "Shaped (dimpled), Spiral (clockwise), and Spiral (counterclockwise);
> these "
> "are described in detail below. The Shaped options are the most
> interesting: "
> "they cause the gradient to follow the shape of the selection boundary, no
> "
> "matter how twisty it is. Unlike the other shapes, Shaped gradients are
> not "
> "affected by the length or direction of the line you draw: for them as
> well "
> "as every other type of gradient you are required to click inside the "
> "selection and move the mouse, but a Shaped appears the same no matter
> where "
> "you click or how you move."
> msgstr ""
> "Der er 11 forskellige former: Lineær, Bilineær, Radial, Kvadratisk,
> Konisk "
>
> radiEl, vil jeg tro
>
> "(symmetrisk), Konisk (asymmetrisk), Formet (vinklet), Formet (sfærisk), "
> "Formet (forsænket), Spiral (med uret) og Spiral (mod uret); disse er "
> "beskrevet i detaljer nedenfor. Indstillingerne i Fromet er de mest "
>
> “FoRMet”-indstillingerne er de mest ...
>
> #: src/toolbox/paint/gradient.xml:120(para)
> msgid ""
> "A variety of gradient patterns can be selected from the drop-down list.
> The "
> "tool causes a shading pattern that transitions from foreground to
> background "
> "color or introduces others colors, in the direction the user determines
> by "
> "drawing a line in the image. For the purposes of drawing the gradient, "
> "clicking on the <guibutton>Reverse</guibutton> reverses the gradient "
> "direction with the effect, for instance, of swapping the foreground and "
> "background colors."
> msgstr ""
> "Der kan vælges en række forskellige farveovergangsmønstre i rullelisten. "
> "Værktøjet skaber et skyggemønster, der skifter fra forgrunds- til "
> "baggrundsfarve eller introducerer andre farver i den retning, brugeren "
> "bestemmer ved at tegne en linje i billedet. Hvis man klikker på "
> "<guibutton>Omvendt</guibutton>, vendes farveovergangens retning med den "
> "virkning, at forgrunds- og baggrundsfarverne byttes om."
>
> #: src/toolbox/paint/gradient.xml:141(para)
> msgid ""
> "<guilabel>Perceptual RGB</guilabel>: When this option is chosen, the
> Blend "
> "Color Space is sRGB. This is the default."
> msgstr ""
> "<guilabel>Perceptuel RGB</guilabel>: Når denne indstilling er valgt, er "
> "Blandefarverummet sRGB. Dette er standardindstillingen."
>
> #: src/toolbox/paint/gradient.xml:147(para)
> msgid ""
> "<guilabel>Linear RGB</guilabel>: When this option is chosen, the Blend
> Color "
> "Space is linearized sRGB (defined by the sRGB primaries and a linear tone
> "
> "reproduction curve). This results in gradients that resemble the physical
> "
> "behavior of light. This option should be used if the color, as measured
> with "
> "a colorimeter, should change linearly with the distance from the color
> stops "
> "within the gradient."
> msgstr ""
> "<guilabel>Lineær RGB</guilabel>: Når denne indstilling er valgt, er "
> "Blandefarverummet lineariseret sRGB (defineret af sRGB-primærerne og en "
> "lineær tonegengivelseskurve). Dette resulterer i farveovergange, der
> ligner "
> "lysets fysiske opførsel. Denne indstilling skal bruges, hvis farven, som "
> "målt med et kolorimeter, skal ændre sig lineært med afstanden fra "
> "farvestoppene i farveovergangen."
>
> #: src/toolbox/paint/gradient.xml:202(para)
> #: src/toolbox/paint/gradient.xml:229(term)
> msgid "Radial"
> msgstr "Radial"
>
> radiEl?
>
> #: src/toolbox/paint/gradient.xml:210(para)
> msgid ""
> "This gradient begins with the foreground color at the starting point of
> the "
> "drawn line and transitions linearly to the background color at the ending
> "
> "point."
> msgstr ""
> "Denne farveovergang begynder med forgrundsfarven ved startpunktet for den
> "
> "tegnede linje og overgår lineært til baggrundsfarven ved slutpunktet."
>
> # Shape er forkert
> #: src/toolbox/paint/gradient.xml:220(para)
> msgid ""
> "This shape proceeds in both directions from the starting point, for a "
> "distance determined by the length of the drawn line. It is useful, for "
> "example, for giving the appearance of a cylinder."
> msgstr ""
> "Denne farveovergang fortsætter i begge retninger fra startpunktet i en "
> "afstand, der bestemmes af længden på den tegnede linje. Den er f.eks.
> nyttig "
> "til at give indtryk af en cylinder."
>
> #: src/toolbox/paint/gradient.xml:286(para)
> msgid ""
> "There are four shapes that are some variant on a square:
> <guilabel>Square</"
> "guilabel>, <guilabel>Shaped (angular)</guilabel>, <guilabel>Shaped "
> "(spherical)</guilabel>, and <guilabel>Shaped (dimpled)</guilabel>. They
> all "
> "put the foreground color at the center of a square, whose center is at
> the "
> "start of the drawn line, and whose half-diagonal is the length of the
> drawn "
> "line. The four options provide a variety in the manner in which the
> gradient "
> "is calculated; experimentation is the best means of seeing the
> differences."
> msgstr ""
> "Der er fire former, som er variationer over et kvadrat:
> <guilabel>Kvadrat</"
> "guilabel>, <guilabel>Formet (vinklet)</guilabel>, <guilabel>Formet "
> "(sfærisk)</guilabel> og <guilabel>Formet (forsænket)</guilabel>. De
> placerer "
> "alle forgrundsfarven i midten af et kvadratt, hvis midte er ved starten
> af "
> "den tegnede linje, og hvis halve diagonal er længden af den tegnede
> linje. "
> "De fire muligheder giver en række forskellige måder at beregne "
> "farveovergangen på; prøv dig frem for at se forskellene."
>
> #: src/toolbox/paint/gradient.xml:329(para)
> msgid ""
> "The <guilabel>Conical (symmetrical)</guilabel> shape gives the sensation
> of "
> "looking down at the tip of a cone, which appears to be illuminated with
> the "
> "background color from a direction determined by the direction of the
> drawn "
> "line."
> msgstr ""
> "Formen <guilabel>Konisk (symmetrisk)</guilabel> giver fornemmelsen af at "
> "kigge ned på spidsen af en kegle, som ser ud til at blive belyst med "
> "baggrundsfarven fra en retning, der bestemmes af retningen på den tegnede
> "
> "linje."
>
> #: src/toolbox/paint/gradient.xml:336(para)
> msgid ""
> "<guilabel>Conical (asymmetric)</guilabel> is similar to <guilabel>Conical
> "
> "(symmetric)</guilabel> except that the \"cone\" appears to have a ridge "
> "where the line is drawn."
> msgstr ""
> "<guilabel>Konisk (asymmetrisk)</guilabel> ligner <guilabel>Konisk "
> "(symmetrisk)</guilabel> bortset fra, at “keglen” ser ud til at have en
> kant, "
> "hvor linjen er tegnet."
>
> #: src/toolbox/paint/gradient.xml:525(para)
> msgid ""
> "Select a gradient in the gradient dialog. Click and drag on canvas. A
> line "
> "is drawn and the gradient is displayed. You can edit this gradient by
> moving "
> "the mouse pointer on this line. As soon as you try to edit gradient, "
> "<acronym>GIMP</acronym> creates a custom gradient, which is a copy of the
> "
> "selected gradient. It becomes the active gradient and will be preserved "
> "across sessions. Here, we use the Abstract3 gradient."
> msgstr ""
> "Vælg en farveovergang i dialogen Farveovergang. Klik og træk på lærredet.
> "
> "Der tegnes en linje, og farveovergangen vises. Du kan redigere denne "
> "farveovergang ved at flytte musemarkøren på denne linje. Så snart du "
> "forsøger at redigere farveovergangen, opretter <acronym>GIMP</acronym> en
> "
> "brugerdefineret farveovergang, som er en kopi af den valgte
> farveovergang. "
> "Den bliver den aktive farveovergang og bevares på tværs af sessioner. Her
> "
> "bruger vi farveovergangen Abstract 3."
>
> #: src/toolbox/paint/gradient.xml:541(para)
> msgid "The Abstract3 gradient, with endpoints"
> msgstr "Farveovergangen Abstract 3 med endepunkter"
>
> #: src/toolbox/paint/gradient.xml:546(para)
> msgid ""
> "At both ends of the line, you can see a <guilabel>Start
> endpoint</guilabel> "
> "and an <guilabel>End endpoint</guilabel>. Click and drag an endpoint (the
> "
> "mouse pointer is accompanied with a moving cross) to move it where you
> want "
> "on your screen. A small window appears showing data about the selected "
> "endpoint: the position of the mouse (coordinate origin is the upper left "
> "corner of image or selection), the starting (left) and the ending (right)
> "
> "color of the gradient."
> msgstr ""
> "I begge ender af linjen kan du se et <guilabel>Startendepunkt</guilabel>
> og "
> "et <guilabel>Slutendepunkt</guilabel>. Klik og træk i et endepunkt "
> "(musemarkøren ledsages af et kryds, der bevæger sig) for at flytte det, "
> "hvorhen du vil på din skærm. Der vises et lille vindue med data om det "
> "valgte endepunkt: musens position (koordinaternes oprindelse er øverste "
> "venstre hjørne af billedet eller markeringen), farveovergangens
> startfarve "
> "(venstre) og slutfarve (højre)."
>
> #: src/toolbox/paint/gradient.xml:573(para)
> msgid ""
> "On the line, you can see several small squares. These are
> <guilabel>Stop</"
> "guilabel>s that divide gradient into segments. You can edit segments "
> "separately. Click and drag stops to move them (the active endpoint takes
> a "
> "yellow color). As soon as you move a stop, the custom gradient is
> created. "
> "The small data window shows a button that allow you to remove the active "
> "stop."
> msgstr ""
> "På linjen kan du se flere små kvadrater. Det er
> <guilabel>Stop</guilabel>s, "
>
> kan fjertals-s'et efter Stop erstattes af noget andet?
> F.eks. Stop-punkter
>
> Mvh Ask
>
> Am So., 4. Feb. 2024 um 16:35 Uhr schrieb Alan Mortensen <
> [email protected]>:
>
>>
>>