Re: K3b 1.0.1 eject problem

Am Mittwoch, 20. Juni 2007 10:38 schrieb Sebastian Trüg:
> On Tuesday 19 June 2007 20:26:18 [email protected] wrote:
> > I attach a K3b output below
> > (DVD+R VIDEO, in this case the DVD is not ejected, K3b is patched with
> > k3bdevice.diff from the previous mail but without changes in "bool
> > K3bDevice::Device::open( bool write ) const").
> > There are many comments which I inserted into K3b. But
> > after "run()" one can see, that K3b is busy with "*name = /dev/sr0"
> > device. (The important messages are after:
> > "***ooo_x1_in  ::slotProcessExited( KProcess* p )" ).
> > x1_in means: Input
> > x1_out means: Output
>
> This is already very good help. The sr0 messages, however, are irrelevant
> since k3b just regularly checks for media changes. Is it possible for you
> to remove that device? Is it an external one? Because that would probably
> make the output easier to read.
> thanks a lot for your efforts.
>
> Cheers,
> sebastian
>
> -------------------------------------------------------------------------
I attach a K3b output below.

K3b is patched 
(with k3bdevice.diff, which I sent in an earlier mail,
the changes should be only in:
 "bool K3bDevice::Device::open( bool write ) const")

I disconnected the sr0 device (it is an internal one).

The DVD+R (VIDEO) ejects 
(see "ooo_x12_in   ::eject() const" in the output)
and I can quit K3b.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

_______________________________________________
K3b-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/k3b-user