Multissession isnt possible

Hellow,

I use k3b from a long time, but since this year, i can not burn continue
multisession in K3B.
I try 3 times start a new DVD and continue and K3B fault with me.

I can not understand why k3b can not continue session give always error.

this is one log debug.

--
Devices
-----------------------
MATSHITA DVD-RAM UJ-850S 1.61 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM,
DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R
Sequencial, DVD-R de Dupla Camada Sequencial, DVD-R de Dupla Camada com
Salto, DVD-RAM, DVD-RW em Sobrescrita Restrita, DVD-RW Sequencial, DVD+RW,
DVD+R, DVD+R de Dupla Camada, CD-ROM, CD-R, CD-RW] [SAO, TAO, Sobrescrita
Restrita, Salto da Camada] [%7]

K3b::IsoImager
-----------------------
mkisofs print size result: 177417 (363350016 bytes)

System
-----------------------
K3b Version: 1.66.0
KDE Version: 4.2.4 (KDE 4.2.4)
QT Version:  4.5.2
Kernel:      2.6.29.3-desktop-1mnb

Used versions
-----------------------
mkisofs: 2.1
cdrecord: 2.1.1a03

cdrecord
-----------------------
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Waiting for data on stdin...
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'MATSHITA'
Identification : 'DVD-RAM UJ-850S '
Revision       : '1.61'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
Speed set to 11080 KB/s
Track 01: data   346 MB
Total size:      397 MB (39:25.56) = 177417 sectors
Lout start:      398 MB (39:27/42) = 177417 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Starting to write CD/DVD at speed   8.0 in real SAO mode for multi session.
Last chance to quit, starting real write in    2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... Errno: 5 (Input/output
error), reserve track scsi sendcmd: no error
CDB:  53 00 00 00 00 00 02 B5 09 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
wodim: Cannot open new session.
input buffer ready.
Writing  time:    0.032s
wodim: fifo had 64 puts and 0 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=8 -sao
driveropts=burnfree -multi -waiti -data -tsize=177417s -

mkisofs
-----------------------
Rock Ridge signatures found
177417
I: -input-charset not specified, using utf-8 (detected in locale settings)
Rock Ridge signatures found
 40.02% done, estimate finish Mon Jul  6 15:29:43 2009
 40.19% done, estimate finish Mon Jul  6 15:29:43 2009
 40.35% done, estimate finish Mon Jul  6 15:29:43 2009
 40.53% done, estimate finish Mon Jul  6 15:29:43 2009

mkisofs calculate size command:
-----------------------
/usr/bin/mkisofs -cdrecord-params 16,117472 -prev-session /dev/sr0 -gui
-graft-points -print-size -quiet -volid Fotos do Daniel -volset  -appid K3B
THE CD KREATOR (C) 1998-2007 SEBASTIAN TRUEG -publisher  -preparer  -sysid
LINUX -volset-size 1 -volset-seqno 1 -sort
/home/daniel/tmp/kde-daniel/k3bY20396.tmp -rational-rock -hide-list
/home/daniel/tmp/kde-daniel/k3br20396.tmp -joliet -joliet-long
-hide-joliet-list /home/daniel/tmp/kde-daniel/k3bM20396.tmp -no-cache-inodes
-full-iso9660-filenames -iso-level 3 -path-list
/home/daniel/tmp/kde-daniel/k3bc20396.tmp

mkisofs command:
-----------------------
/usr/bin/mkisofs -cdrecord-params 16,117472 -prev-session /dev/sr0 -gui
-graft-points -volid Fotos do Daniel -volset  -appid K3B THE CD KREATOR (C)
1998-2007 SEBASTIAN TRUEG -publisher  -preparer  -sysid LINUX -volset-size 1
-volset-seqno 1 -sort /home/daniel/tmp/kde-daniel/k3bj20396.tmp
-rational-rock -hide-list /home/daniel/tmp/kde-daniel/k3bR20396.tmp -joliet
-joliet-long -hide-joliet-list /home/daniel/tmp/kde-daniel/k3bk20396.tmp
-no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list
/home/daniel/tmp/kde-daniel/k3bE20396.tmp

--

I Can continue session with other program like TkDVD. for a test, and i can
not understend why k3b dont continue session.

Regards
Daniel

------------------------------------------------------------------------------

_______________________________________________
K3b-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/k3b-user