Re: (no subject)

Hi Martin,

>> auto1-tow_usb is my Palm :-) When I disconnect the palm this reader
>> is no more there.
>[...]
>> aqhbci-qt3-wizard: client.c:207: LC_Client_CheckForError: Zusicherung
>> �name� nicht erf�llt.
>[...]
>The recent version of libchipcard2 should fix that.

OK, I'll wait for the new Debian packages.


>[...]
>> tuxbox:/home/tobias# lsusb
>> Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303
>> Serial Port
>> Bus 003 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303
>> Serial Port
>[...]
> Oh, that's an ugly one: The reader does not identify itself by an
> unique id, instead the USB id of the usb-serial-converter applies...
> Unfortunately the palm cradle seems to show the same behaviour... So
> autodetection isn't possible on your system :-(

> This is extremely bad since your reader is sometimes at port 0 and
> sometime at port 1 (that mainly has to do with the palm cradle, which
> doesn't register as device at all unless it is activated).

> Maybe you could send the content of /sys/bus/usb-serial/ (with the
> reader connected)

-----%<-----
tobias@tuxbox:~$ ls -al /sys/bus/usb-serial/devices/
insgesamt 0
lrwxrwxrwx 1 root root 0 2005-12-05 10:20 ttyUSB0 ->
../../../devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1.3/2-1.3:1.0/ttyUSB0
lrwxrwxrwx 1 root root 0 2005-12-05 10:20 ttyUSB1 ->
../../../devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1.4/2-1.4:1.0/ttyUSB1

tobias@tuxbox:~$ ls -al /sys/bus/usb-serial/drivers/PL-2303/
insgesamt 0
--w------- 1 root root 4096 2005-12-05 10:22 bind
lrwxrwxrwx 1 root root    0 2005-12-05 10:22 module ->
../../../../module/pl2303
lrwxrwxrwx 1 root root    0 2005-12-05 10:22 ttyUSB0 ->
../../../../devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1.3/2-1.3:1.0/ttyUSB0
lrwxrwxrwx 1 root root    0 2005-12-05 10:22 ttyUSB1 ->
../../../../devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1.4/2-1.4:1.0/ttyUSB1
--w------- 1 root root 4096 2005-12-05 10:22 unbind

tobias@tuxbox:~$ chipcard-tool check
  Readers:
  - auto1-tow_usb (tow_usb, port 0): up
  - auto2-tow_usb (tow_usb, port 0): error
-----%<-----

> and of /proc/tty/driver/usbserial?

-----%<-----
tuxbox:/home/tobias# ls -al /proc/tty/driver/usbserial
-r--r--r-- 1 root root 0 2005-12-05 11:54 /proc/tty/driver/usbserial

tuxbox:/home/tobias# cat /proc/tty/driver/usbserial
usbserinfo:1.0 driver:v2.0
0: module:pl2303 name:"PL-2303" vendor:067b product:2303 num_ports:1
port:1 path:usb-0000:00:03.0-1.3
1: module:pl2303 name:"PL-2303" vendor:067b product:2303 num_ports:1
port:1 path:usb-0000:00:03.0-1.4
-----%<-----

If autodetection is not possible, I have to tell him on which USB Port
it can find the reader. Where can I specify that? How can I specify it
in the /etc/chipcard2-server/drivers/tow_ctapi/driver.xml?

Thanks and Greetings, Tobias


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click