Re: Connecting to input endpoint 0x84

Hello Kusti,
COM port is not available... 

________________________________________
Od: Kustaa Nyholm <[email protected]>
Odesláno: 6. října 2015 12:17
Komu: [email protected]
Předmět: Re: [Libusb-win32-devel] Connecting to input endpoint 0x84

Without knowing anything about your device my first reaction is that since it is a modem it should appear as a COM port to applications and thus libusb is the wrong library, you need to access it as a serial port, possibly with a serial library ...

br Kusti

> On 6 Oct 2015, at 12:26, Kněžík Jan <[email protected]> wrote:
>
> Hello,
> I am beginner on USB and I want to use LibUsbDotNet to connect GSM modem and send an AT command. LibUsbDotNet offers only endpoints number 1 to 15 (WriteEndpointID) and I need 0x84. Am I missing something? Thank you very much.
>
> Best Regards,
> Jan Knezik
> <ATT00001.c><ATT00002.c>


This e-mail may contain confidential or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. We will not be liable for direct, indirect, special or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on or as of transmission of this e-mail in general.
------------------------------------------------------------------------------
_______________________________________________
Libusb-win32-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/libusb-win32-devel

------------------------------------------------------------------------------