Re: [BitPim-devel] Re: Sprint Samsung SPH-M520

I looked at this a little more last night.  It turns out that the m520
responds to a couple of commands differently than other Samsung phones.
So, I need to add m520-specific detection to the new
com_samsungsphm520.py code.  If I can get the new code cleaned up, maybe
it'll be ready to check-in next week.  It won't do much other than
detect the phone.

 

Is it legal for me to check-in directly, or should I make diffs and post
them to the list?

 

Regards. 
Mark K Vallevand

We old folks have to find our cushions and pillows in our tankards.
Strong beer is the milk of the old.
- Martin Luther


THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY
MATERIAL and is thus for use only by the intended recipient. If you
received this in error, please contact the sender and delete the e-mail
and its attachments from all computers.

________________________________

From: [email protected]
[mailto:[email protected]] On Behalf Of
Vallevand, Mark K
Sent: Monday, June 02, 2008 9:05 AM
To: [email protected];
[email protected]
Subject: [BitPim-devel] [BitPim-user] Re: Sprint Samsung SPH-M520

 

I'm not sure if anyone else is trying to make it work, but I'm giving it
a go.

So far not much joy.  A little, but not much.

 

Bitpim works by talking to the modem in the phone and having it do all
the work.  The m520 has a modem.  You can talk to it and some of the
vary basic commands are recognized.  I've made some changes so bitpim
recognizes the phone, and not much more.  But, no commands used to do
the important stuff are working.  No phone book access, etc.  Foo.  I'm
trying out lot of different commands and not making much progress.  I'm
trying an experiment to send every possible command to the modem and see
which respond.  Others have tried similar tactics with other phones.
But, the little bugger is fussy as anything.  The modem locks up after a
while and just stares at you.  You need to turn the phone off and on.

 

It doesn't help that I'm not a python programmer.  I'm a pretty good
programmer and a language is a language.  But, there still is a learning
curve.  And, there are lots of other projects that need attention, too. 

 

I'm not sure if my changes for the m520 will ever make it into the
bitpim trunk.  I'm not even sure I made them in the right way.

 

I'm also having list troubles at home (I blame MSN or Qwest) and am
answering from work.

 

Regards.
Mark K Vallevand

	----- Original Message ----- 

	From: Gene Liverman <mailto:[email protected]>  

	To: BitPim-user <mailto:[email protected]>  

	Sent: Sunday, June 01, 2008 6:51 PM

	Subject: [BitPim-user] Sprint Samsung SPH-M520

	 

	Sorry if this has been asked before... I have been away from the
list for a very long time.  Has anyone had any luck in getting the
Sprint Samsung SPH-M520 to work with BitPim?  I just got mine today and
want to play :)  If there is anything I can do to help just let me
know... I am not a developer but can follow directions quite well.
	
	
	
	Gene
	
------------------------------------------------------------------------
-
	This SF.net email is sponsored by: Microsoft
	Defy all challenges. Microsoft(R) Visual Studio 2008.
	
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/_________________
______________________________
	BitPim-user mailing list [email protected]
	Unsubscribe or change options at
	https://lists.sourceforge.net/lists/listinfo/bitpim-user
	
	There are several hundred people on this list.  Please be
	courteous, on topic and follow the instructions before posting
	http://www.bitpim.org/help/support.htm

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

_______________________________________________
BitPim-user mailing list [email protected]
Unsubscribe or change options at
https://lists.sourceforge.net/lists/listinfo/bitpim-user

There are several hundred people on this list.  Please be
courteous, on topic and follow the instructions before posting
http://www.bitpim.org/help/support.htm