RE: 8 bit message problem

i don't know yet if it because of the OS, since I didn't install the CVS
linux version.
On lthe linux I have the 1.1.5.

AnyHow I'll check the logs and see how it's going and I'll send them to you

> -----Original Message-----
> From:	Bruno David Rodrigues [SMTP:[email protected]]
> Sent:	05 March, 2002 3:03 PM
> To:	Avner Sternheim
> Cc:	[email protected]
> Subject:	Re: 8 bit message problem
> 
> If  you set udh and don't set coding, this defaults to 8 bit.
> 
> But are you saying that one operating system interprets udh as
> present and other don't ?
> 
> We use octstr_len(udh) to check the udh value, so even if udh
> is defined, it should be empty and the code should still set
> coding=7Bits.
> 
> Can you seen in logs if udh lenght is different from 0 ?
> 
> 
> ----- Original Message -----
> From: "Avner Sternheim" <[email protected]>
> To: "'Andreas Fink'" <[email protected]>
> Cc: <[email protected]>
> Sent: Tuesday, March 05, 2002 12:54 PM
> Subject: RE: 8 bit message problem
> 
> 
> > Hi,
> >
> > I didn't write the right parametes on the last message,
> > when I sent it  via the linux version I set the parameters as listed
> bellow.
> >
> > udh=&text=%ff%00%ff
> >
> > ( the text data is irrelevant but what was seems to be in the past that
> by
> > using the udh= , with no value it encrypt my text to 8 bit message.)
> >
> > I forgot to tell that I'm using protocol emi2. to connect my SMSC.
> >
> > > -----Original Message-----
> > > From: Andreas Fink [SMTP:[email protected]]
> > > Sent: 04 March, 2002 8:12 PM
> > > To: Avner Sternheim
> > > Subject: Re: 8 bit message problem
> > >
> > > >I was working on KANNEL version 1.1.5 on linux server and now I've
> > > switched
> > > >to
> > > >KANNEL 1.1.CVS version on windows 2000
> > > >
> > > >on the linux when I wanted to send data to an end unit I've send the
> data
> > > >with udh parameter and the text :
> > > >
> > > >&udh=%06%05%04%0B%84%23%F0&text=%ff%00%ff
> > > >
> > > >and not when with the NT CVS version the same line doesn't work
> > > >it seems that it send it in 7bit encoding.
> > > >and when I tried to change the coding paramer to 2 or 3 the message
> > > didn't
> > > >arrive at all
> > > >
> > > >does someone know the solution ?
> > >
> > > the UDH and content do look pretty strange to me.
> > > What is it supposed to be?
> > >
> > > --
> > >
> > > Andreas Fink
> > > Fink-Consulting
> > >
> > > ------------------------------------------------------------------
> > > Tel: +41-61-6932730 Fax: +41-61-6932729  Mobile: +41-79-2457333
> > > Address: A. Fink, Schwarzwaldallee 16, 4058 Basel, Switzerland
> > > E-Mail:  [email protected]  Homepage: http://www.finkconsulting.com
> > > ------------------------------------------------------------------
> > > Something urgent? Try http://www.smsrelay.com/  Nickname afink
> >
> >