RE: Siemens SEO Specification

AFAIK, siemence ota has to be sent as 8-bit sms without any udh

> -----Original Message-----
> From: Aarno Syvanen [mailto:[email protected]]
> Sent: Tuesday, March 11, 2003 10:13 AM
> To: Dominik Simon
> Cc: devel @ kannel . 3glab . org
> Subject: Re: Siemens SEO Specification
> 
> 
> Hi Dominic,
> 
> I am interested about ota to siemens, too. Are there public specs  
> available ?
> What port do ota messages use ?
> 
> Aarno
> 
> On Saturday, March 8, 2003, at 03:16 PM, Dominik Simon wrote:
> 
> > Hi Soren,
> >
> > here is my specification of siemens-ota (seo), I use:
> >
> > - - - -
> >
> > 5 [2F 2F 53 45 4F] - Identifier ASCII "//SEO"
> > 1 [01] - Version 1,
> > 2 [67 00] - DataSize = 103 Byte
> > 4 [79 07 00 00] - Referenz-ID
> > 2 [01 00] - ActPacketNumber = 1
> > 2 [08 00] - NumberOfPackets = 8
> > 4 [EE 02 00 00] - ObjectSize = 750 Byte
> > 4 [03 62 6D 70] - ObjectType = 3 "bmp"
> > 13 [OC 4F 70 65 72 61 74 6F 72 2E 62 6D 70] - ObjectName = 12  
> > "Operator.bmp"
> > 103 [70 42 4D ...] Data of the Bitmap in BMP-Format
> > = 140 Bytes (if the last sms is less, you have to fill out with 00  
> > (zero).
> >
> > - - - -
> >
> > If you have a look on my seo-example, here I split and tell 
> you more  
> > about
> > the first sms:
> >
> > 2F2F53454F       = //SEO
> >
> > 01               = Seo-Version 1
> >
> > 6600             = my Data-Size is 102 Byte
> >
> > 2664673E         = my ID of the seo-sms (must be the same 
> in every sms)
> >
> > 0100             = message-number 1
> >
> > 0500             = of 5 messages
> >
> > C3010000         = 451 byte data-size (here from my midi)
> >
> > 036D6964         = 3 number of letters / BMP
> >
> > 0D756E646572626572672E6D6964 = 13 number of letters / UNDERBERG.MID
> >
> > 
> 4D546864000000060001000201E04D54726B0000004700FF0314417564696F
> 496E73742 
> > 02031
> > 
> 2A6B6F706965727400FF01124445564943453D47454E4552414C2E4D445600
> FF5804040 
> > 22408
> > 00FF5902000000FF5103087A2300FF2F004D54726B0000015E00
> > = DATA of the midifile
> >
> > - - - -
> >
> > Now I want to send this seo-string to my kannel-gateway, as 
> udh-string
> > - but it only works with ems-messages :-(( no siemens.
> >
> > Thanks for your help!
> >
> > -- 
> > Best regards,
> >  Dominik                          mailto:[email protected]
> >
> >
> 
> 
>