Re: SMPP usage problem

thanks, but still the sending problem.  also tried leaving the
transceiver mode in with an empty system type, but same thing.  

the SMSC guys told us to use transceiver mode so i think that part is
correct.

thanks for your help,
nick


On Thu, 2003-03-13 at 17:58, Alex Judd wrote:
> Try leaving the system type empty and removing the transceiver-mode line.
> 
> Alex
>   ----- Original Message ----- 
>   From: Nicholas Rahn 
>   To: [email protected] 
>   Sent: Thursday, March 13, 2003 4:32 PM
>   Subject: SMPP usage problem
> 
> 
>   hi, 
> 
>   we are trying to get an smpp (3.4) connection up and running with kannel, but are having a few problems. 
> 
>   we are able to login correctly, send and receive the "enquire_link" packets and receive SMS.  however, we are not able to send messages using the sendsms interface. 
> 
>   when we send via the sendsms interface, this is the log output... 
> 
>   2003-03-13 17:26:55 [2] DEBUG: HTTP: Creating HTTPClient for `127.0.0.1'. 
>   2003-03-13 17:26:55 [3] INFO: smsbox: Got HTTP request </cgi-bin/sendsms> from <127.0.0.1> 
>   2003-03-13 17:26:55 [3] INFO: sendsms used by <smppTest> 
>   2003-03-13 17:26:55 [3] INFO: sendsms sender:<smppTest:111> (127.0.0.1) to:<+417xxxxxxxx> msg:<My test message!> 
>   2003-03-13 17:26:55 [3] INFO: send-sms request smsc id ignored, as smsc id forced to smppTest 
>   2003-03-13 17:26:55 [3] DEBUG: message length 16, sending 1 messages 
>   2003-03-13 17:26:55 [3] DEBUG: Status: 202 Answer: <Sent.> 
>   2003-03-13 17:26:55 [42] DEBUG: boxc_receiver: sms received 
>   2003-03-13 17:26:55 [3] DEBUG: HTTP: Destroying HTTPClient area 0x80b1af8. 
>   2003-03-13 17:26:55 [3] DEBUG: HTTP: Destroying HTTPClient for `127.0.0.1'. 
> 
>   and that's it.  the bearerbox never seems to do anything with it. 
> 
>   here's our config: 
> 
>   group = smsc 
>   smsc = smpp 
>   smsc-id = smppTest 
>   host = xxx.xxx.xxx.xxx 
>   port = xxxx 
>   smsc-username = xxx 
>   smsc-password = xxxxxxxx 
>   transceiver-mode = true 
>   system-type = "VMA" 
>   allowed-smsc-id = smppTest 
>   address-range = "" 
> 
>   anyone have any ideas what we might be doing wrong?  
> 
>   Thanks for any help, 
>   Nick