Re: how to send PUSH in CDMA network

Your udh is wrong. It should be:

0x06   Length of udh
0x05   Port number ie iei
0x04   Length of port number ie
0x0b   destination high
0x24   destination low
0x23   source high
0xf0     source low

Aarno

On Sunday, June 1, 2003, at 06:38 PM, ÇúÃùïá wrote:

>
> I send a SMS from SMSC to the Mobile Phone which includes WAP PUSH.  
> The SMS is according to the WDP protocol, it's contents as follows:
>
> 0x00(MSG_TYPE=WDP)
> 0x01(TOTAL_SEGMENTS=1)
> 0x00(SEGMENT_NUMBER=0)
> 0x23
> 0xf0(SOURCE_PORT=9200)
> 0x0b
> 0x84(DESTINATION_PORT=2948)
> 0x01(PUSH Id=1)
> 0x06(PUSH)
> Other data
>
> The Mobile Phone receives the SMS,but it takes the SMS as a normal SMS.
>
>
> I see that the SMS contents sent by the PPG of Openwave is  
> "// 
> WDAAMADnABUwKIABAJiaHJgTISoeqCITJKcetzq2NhMoKiSiHpkAANEANRNzQVRzSltyxFg 
> YmZmZmpsaIKCgoPLHyPNO0vPNQnNbRHNA150QAEKCwYADAYAFgI"
> I do not know its meaning.
>
> Thank you very much£¡
>
>
> QuMingdi
>
> China
> ______________________________________
>
> ===================================================================
>