Re: how to send PUSH in CDMA network
Aarno Syvänen <[email protected]>
| Newsgroups | gmane.comp.mobile.kannel.devel |
|---|---|
| Message-ID | <[email protected]> |
Does openwave push utilize sm for sending sm ? Aarno On Monday, June 2, 2003, at 03:26 PM, Aarno Syvänen wrote: > Your udh is wrong. It should be: > > 0x06 Length of udh > 0x05 Port number ie iei > 0x04 Length of port number ie > 0x0b destination high > 0x24 destination low > 0x23 source high > 0xf0 source low > > Aarno > > On Sunday, June 1, 2003, at 06:38 PM, ÇúÃùïá wrote: > >> >> I send a SMS from SMSC to the Mobile Phone which includes WAP PUSH. >> The SMS is according to the WDP protocol, it's contents as follows: >> >> 0x00(MSG_TYPE=WDP) >> 0x01(TOTAL_SEGMENTS=1) >> 0x00(SEGMENT_NUMBER=0) >> 0x23 >> 0xf0(SOURCE_PORT=9200) >> 0x0b >> 0x84(DESTINATION_PORT=2948) >> 0x01(PUSH Id=1) >> 0x06(PUSH) >> Other data >> >> The Mobile Phone receives the SMS,but it takes the SMS as a normal >> SMS. >> >> >> I see that the SMS contents sent by the PPG of Openwave is >> "// >> WDAAMADnABUwKIABAJiaHJgTISoeqCITJKcetzq2NhMoKiSiHpkAANEANRNzQVRzSltyxF >> gYmZmZmpsaIKCgoPLHyPNO0vPNQnNbRHNA150QAEKCwYADAYAFgI" >> I do not know its meaning. >> >> Thank you very much£¡ >> >> >> QuMingdi >> >> China >> ______________________________________ >> >> =================================================================== >> > >