Push using PI through 1.2.1 PPG - full log

On Kannel 1.2.1 with Bearbox and wapbox running
the testppg works fine with the following Conenet and Control files but when
i try the same with external CGI program to POST the same  the follwing
Happens

POST /cgi-bin/push.cgi HTTP/1.1
Host:10.0.3.236
Content-Type:    multipart/related;    boundary=asdfghjklpoiuyyyqwe;
type="application/xml"
--asdfghjklpoiuyyyqwe
Content-Type: application/xml

<?xml version="1.0"?>
<!DOCTYPE pap PUBLIC "-//WAPFORUM//DTD PAP 1.0//EN"
"http://www.wapforum.org/DTD/pap_1.0.dtd">
        <pap>
                <push-message push-id="387"
progress-notes-requested="false">
      <address address-value="WAPPUSH=+35812345/[email protected]"/>
 <quality-of-service delivery-method="unconfirmed" network-required="true"
network="GSM" bearer-required="true" bearer="SMS"/></push-message>
        </pap>

--asdfghjklpoiuyyyqwe
Content-type: text/vnd.wap.si

<?xml version="1.0"?>
<!DOCTYPE si PUBLIC "-//WAPFORUM//DTD SI 1.0//EN"
"http://www.wapforum.org/DTD/si.dtd">
        <si>
                <indication si-id="1" href="http://10.0.3.236"
action="signal-high">Test  Push</indication>
        </si>

--asdfghjklpoiuyyyqwe


I get the Follwoing response

 -- <?xml version="1.0"?><!DOCTYPE pap PUBLIC "-//WAPFORUM//DTD PAP 1.0//EN"
"http://www.wapforum.org/DTD/pap_1.0.dtd"><pap><badmessage-response
code="2000" desc="Not understood due to malformed syntax"
bad-message-fragment="--asdfghjklpoiuyyyqwe
Content-Type: application/xml

<?xml version="1.0"?>
<!DOCTYPE pap PUBLIC "-//WAPFORUM//DTD PAP 1.0//EN"
"http://www.wapforum.org/DTD/pap_1.0.dtd">
        <pap>
                <push-message push-id="387"
progress-notes-requested="false">
      <address address-value="WAPPUSH=+35812345/[email protected]"/>
 <quality-of-service delivery-method="unconfirmed" network-required="true"
network="GSM" bearer-required="true" bearer="SMS"/></push-message>
        </pap>

--asdfghjklpoiuyyyqwe
Content-type: text/vnd.wap.si

<?xml version="1.0"?>
<!DOCTYPE si PUBLIC "-//WAPFORUM//DTD SI 1.0//EN"
"http://www.wapforum.org/DTD/si.dtd">
        <si>
                <indication si-id="1" href="http://10.0.3.236"
action="signal-high">Test  Push</indication>
        </si>

--asdfghjklpoiuyyyqwe" ></badmessage-response></pap>

and the LOG
2004-04-24 14:26:34 [11] DEBUG: HTTP: Creating HTTPClient for `10.0.3.236'.
2004-04-24 14:26:34 [14] INFO: PPG: Accept request </cgi-bin/wap-push.cgi>
from <10.0.3.236>
2004-04-24 14:26:34 [14] DEBUG: mime_content is : '--asdfghjklpoiuyyyqwe
Content-type: text/vnd.wap.si

<?xml version="1.0"?>
<!DOCTYPE si PUBLIC "-//WAPFORUM//DTD SI 1.0//EN"
"http://www.wapforum.org/DTD/si.dtd">
        <si>
                <indication si-id="1" href="http://10.0.3.236"
action="signal-high">Test  Push</indication>
        </si>

--asdfghjklpoiuyyyqwe


I get the Follwoing response

 -- <?xml version="1.0"?><!DOCTYPE pap PUBLIC "-//WAPFORUM//DTD PAP 1.0//EN"
"http://www.wapforum.org/DTD/pap_1.0.dtd"><pap><badmessage-response
code="2000" desc="Not understood due to malformed syntax"
bad-message-fragment="--asdfghjklpoiuyyyqwe
Content-Type: application/xml

<?xml version="1.0"?>
<!DOCTYPE pap PUBLIC "-//WAPFORUM//DTD PAP 1.0//EN"
"http://www.wapforum.org/DTD/pap_1.0.dtd">
        <pap>
                <push-message push-id="387"
progress-notes-requested="false">
      <address address-value="WAPPUSH=+35812345/[email protected]"/>
 <quality-of-service delivery-method="unconfirmed" network-required="true"
network="GSM" bearer-required="true" bearer="SMS"/></push-message>
        </pap>

--asdfghjklpoiuyyyqwe
Content-type: text/vnd.wap.si

<?xml version="1.0"?>
<!DOCTYPE si PUBLIC "-//WAPFORUM//DTD SI 1.0//EN"
"http://www.wapforum.org/DTD/si.dtd">
        <si>
                <indication si-id="1" href="http://10.0.3.236"
action="signal-high">Test  Push</indication>
        </si>

--asdfghjklpoiuyyyqwe'
2004-04-23 14:26:34 [14] WARNING: erroneous preamble
2004-04-23 14:26:34 [14] DEBUG: PPG: send_bad_message_response: telling pi
2004-04-23 14:26:34 [14] DEBUG: HTTP: Destroying HTTPClient area 0x80d2b58.
2004-04-23 14:26:34 [14] DEBUG: HTTP: Destroying HTTPClient for
`10.0.3.236'.
2004-04-23 14:26:34  [14] WARNING: PPG: unable to parse mime content, the
request unacceptable



Has anyone written a PI to Post to the PPG and got a succesful reply . Or
where am I going wrong ???

Regards
Norbert