Re: Ericsson R520 -> CMS

Hello!
SonyEricsson GT-47 does not work either with AT+CNMI=3,2,0,0, but works 
with AT+CNMI=3,1,0,0
Here is the log:
2004-08-30 13:31:44 [23220] [7] DEBUG: AT2[ttyS0]: --> AT+CNMI=3,2,0,0^M
2004-08-30 13:31:45 [23220] [7] DEBUG: AT2[ttyS0]: <-- OK
2004-08-30 13:31:45 [23220] [7] INFO: AT2[ttyS0]: AT SMSC successfully 
opened.
2004-08-30 13:31:46 [23232] [9] DEBUG: Thread 9 (gw/bb_boxc.c:function) 
maps to pid 23232.
2004-08-30 13:31:46 [23232] [9] INFO: Client connected from <127.0.0.1>
2004-08-30 13:31:46 [23232] [9] DEBUG: Started thread 10 
(gw/bb_boxc.c:boxc_sender)
2004-08-30 13:31:46 [23234] [10] DEBUG: Thread 10 
(gw/bb_boxc.c:boxc_sender) maps to pid 23234.
2004-08-30 13:31:46 [23219] [6] DEBUG: Started thread 9 
(gw/bb_boxc.c:function)
2004-08-30 13:31:47 [23220] [7] DEBUG: AT2[ttyS0]: --> AT^M
2004-08-30 13:31:47 [23220] [7] DEBUG: AT2[ttyS0]: <-- OK
2004-08-30 13:33:49 [23220] [7] DEBUG: AT2[ttyS0]: --> AT^M
2004-08-30 13:33:49 [23220] [7] DEBUG: AT2[ttyS0]: <-- OK
2004-08-30 13:35:51 [23220] [7] DEBUG: AT2[ttyS0]: --> AT^M
2004-08-30 13:35:51 [23220] [7] DEBUG: AT2[ttyS0]: <-- OK
2004-08-30 13:35:51 [23220] [7] DEBUG: AT2[ttyS0]: <-- +CMT: 23
2004-08-30 13:35:52 [23220] [7] DEBUG: AT2[ttyS0]: <-- 
0791534850028200040C9153486503234600114080033153748004D4F29C0E
2004-08-30 13:35:52 [23220] [7] ERROR: AT2[ttyS0]: got +CMT but 
pdu_extract failed

Regards, Matti Ärmänen

Stipe Tolj wrote:

> Tim S wrote:
>
>> Hi Enver;
>>
>> I had alot of trouble with R520 / Kannel 1.3.2, but got it working.  
>> Do not know why but it did not pull the settings right from 
>> modems.conf.  I moved the modems group into kannel.conf.  But your 
>> CNMI is off.  3,2,0,0?  Missing a number I think.  There are 3 that I 
>> found work with R520, I am using 3,1,0,0,0 now.  I am sure there are 
>> many others on this list with alot more experience and mor ewisdom to 
>> share than mine :)
>
>
> ok, so you siwtched the init-string to "AT+CNMI=3,1,0,0,0", right?
>
> Can you try the same with 3,2,0,0,0 and provide us the bearerbox log 
> to see what response you get from the device.
>
> @all: should we switch the init-string here for that specific device?
> I need confirmation from others, since I don't have that device handy 
> here ;)
>
> Stipe
>
> mailto:stolj_{at}_wapme.de
> -------------------------------------------------------------------
> Wapme Systems AG
>
> Vogelsanger Weg 80
> 40470 Düsseldorf, NRW, Germany
>
> phone: +49.211.74845.0
> fax: +49.211.74845.299
>
> mailto:info_{at}_wapme-systems.de
> http://www.wapme-systems.de/
> -------------------------------------------------------------------
>
> -----BEGIN PGP PUBLIC KEY BLOCK-----
> Version: GnuPG v1.2.2 (Cygwin)
>
> mIsEP6mcYwEEAMDnUiUwrbb+xwTFWN6TxF2+XZu7/alwJMeCwMBRvXtPZqfjpPhS
> OkBpU0F4TrVuugz1HINTSaJTYq10AzDQXp5NkyWgckqW79nPAWuOX0dicbJk+cN2
> nM2TI4KaxUDe6u8hghNEnH/i2lXsUu9apnP/iixzV81VC2je3uc9hZpnAAYptEVT
> dGlwZSBUb2xqIChUZWNobm9sb2d5IENlbnRlciAmIFJlc2VhcmNoIExhYikgPHRv
> bGpAd2FwbWUtc3lzdGVtcy5kZT6ItAQTAQIAHgUCP6mcYwIbAwYLCQgHAwIDFQID
> AxYCAQIeAQIXgAAKCRABV0w1BqPYRuSqA/wPzsQxao2YePENCtgRTrO86U6zg3sl
> OcS6CJFI4FZP5h/xD3GRsNH1+MPSvZlomDdpFnr547DGz/Kq9MXuQwVvlVig5yWZ
> K5dtKp1r5YLhxJQBhfirZbRFFnYmf19f18J8OoS28tuFVftDl1AIwJS3HLyBTv6H
> g2HyLAEKQIp30Q==
> =aYCI
> -----END PGP PUBLIC KEY BLOCK-----
>
>
>