Re: Ericsson R520 -> CMS

Tim S <[email protected]>
Newsgroups gmane.comp.mobile.kannel.devel
Message-ID <[email protected]>
I can do that for you soon maybe tomorrow.  Last year when I first 
started using R520 as modem, someone on the group suggested I use 
minicom or
hyperterminal (windows) to ask the phone for CNMI settings.  I was told 
any that the phone replied OK to would work.

3,2,0,0,0 and 3,1,0,0,0 work, and at least one more.  I have them stored 
on another computer.  It seems my data cable is damaged, that may explan 
the initial trouble I was having.  But, now it works, but as I said I 
have the group = modems in kannel.conf and not in modems.conf.

The mail I was replying to, the CNMI was 3,2,0,0 hence missing a ,0 at 
the end.  I was just guessing that could be a reason for his trouble.

TimS


Stipe Tolj wrote:

> Tim S wrote:
>
>> Hi Enver;
>>
>> I had alot of trouble with R520 / Kannel 1.3.2, but got it working.  
>> Do not know why but it did not pull the settings right from 
>> modems.conf.  I moved the modems group into kannel.conf.  But your 
>> CNMI is off.  3,2,0,0?  Missing a number I think.  There are 3 that I 
>> found work with R520, I am using 3,1,0,0,0 now.  I am sure there are 
>> many others on this list with alot more experience and mor ewisdom to 
>> share than mine :)
>
>
> ok, so you siwtched the init-string to "AT+CNMI=3,1,0,0,0", right?
>
> Can you try the same with 3,2,0,0,0 and provide us the bearerbox log 
> to see what response you get from the device.
>
> @all: should we switch the init-string here for that specific device?
> I need confirmation from others, since I don't have that device handy 
> here ;)
>
> Stipe
>
> mailto:stolj_{at}_wapme.de
> -------------------------------------------------------------------
> Wapme Systems AG
>
> Vogelsanger Weg 80
> 40470 Düsseldorf, NRW, Germany
>
> phone: +49.211.74845.0
> fax: +49.211.74845.299
>
> mailto:info_{at}_wapme-systems.de
> http://www.wapme-systems.de/
> -------------------------------------------------------------------
>
> -----BEGIN PGP PUBLIC KEY BLOCK-----
> Version: GnuPG v1.2.2 (Cygwin)
>
> mIsEP6mcYwEEAMDnUiUwrbb+xwTFWN6TxF2+XZu7/alwJMeCwMBRvXtPZqfjpPhS
> OkBpU0F4TrVuugz1HINTSaJTYq10AzDQXp5NkyWgckqW79nPAWuOX0dicbJk+cN2
> nM2TI4KaxUDe6u8hghNEnH/i2lXsUu9apnP/iixzV81VC2je3uc9hZpnAAYptEVT
> dGlwZSBUb2xqIChUZWNobm9sb2d5IENlbnRlciAmIFJlc2VhcmNoIExhYikgPHRv
> bGpAd2FwbWUtc3lzdGVtcy5kZT6ItAQTAQIAHgUCP6mcYwIbAwYLCQgHAwIDFQID
> AxYCAQIeAQIXgAAKCRABV0w1BqPYRuSqA/wPzsQxao2YePENCtgRTrO86U6zg3sl
> OcS6CJFI4FZP5h/xD3GRsNH1+MPSvZlomDdpFnr547DGz/Kq9MXuQwVvlVig5yWZ
> K5dtKp1r5YLhxJQBhfirZbRFFnYmf19f18J8OoS28tuFVftDl1AIwJS3HLyBTv6H
> g2HyLAEKQIp30Q==
> =aYCI
> -----END PGP PUBLIC KEY BLOCK-----
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.