Re: Destination address problem with 1.4.1

Hi Stipe,

I just updated kannel through CVS, but I am still receiving errors. I
don't understand why this is happenig. This is my dump:

2006-11-13 17:12:53 [32590] [6] DEBUG: SMPP PDU 0x81b4a10 dump:
2006-11-13 17:12:53 [32590] [6] DEBUG:   type_name: deliver_sm
2006-11-13 17:12:53 [32590] [6] DEBUG:   command_id: 5 = 0x00000005
2006-11-13 17:12:53 [32590] [6] DEBUG:   command_status: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG:   sequence_number: 856949 =
0x000d1375
2006-11-13 17:12:53 [32590] [6] DEBUG:   service_type: NULL
2006-11-13 17:12:53 [32590] [6] DEBUG:   source_addr_ton: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG:   source_addr_npi: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG:   source_addr: "51198550378"
2006-11-13 17:12:53 [32590] [6] DEBUG:   dest_addr_ton: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG:   dest_addr_npi: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG:   destination_addr: "8585"
2006-11-13 17:12:53 [32590] [6] DEBUG:   esm_class: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG:   protocol_id: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG:   priority_flag: 1 = 0x00000001
2006-11-13 17:12:53 [32590] [6] DEBUG:   schedule_delivery_time: NULL
2006-11-13 17:12:53 [32590] [6] DEBUG:   validity_period: NULL
2006-11-13 17:12:53 [32590] [6] DEBUG:   registered_delivery: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG:   replace_if_present_flag: 0 =
0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG:   data_coding: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG:   sm_default_msg_id: 0 = 0x00000000
2006-11-13 17:12:53 [32590] [6] DEBUG:   sm_length: 39 = 0x00000027
2006-11-13 17:12:53 [32590] [6] DEBUG:   short_message:
2006-11-13 17:12:53 [32590] [6] DEBUG:    Octet string at 0x81b4b58:
2006-11-13 17:12:53 [32590] [6] DEBUG:      len:  39
2006-11-13 17:12:53 [32590] [6] DEBUG:      size: 40
2006-11-13 17:12:53 [32590] [6] DEBUG:      immutable: 0
2006-11-13 17:12:53 [32590] [6] DEBUG:      data: 44 49 4d 45 20 4b 45
20 44 45 53 45 41 53 20 53   DIME KE DESEAS S
2006-11-13 17:12:53 [32590] [6] DEBUG:      data: 41 42 45 52 20 44 45
20 4d 49 3f 54 45 20 45 53   ABER DE MI?TE ES
2006-11-13 17:12:53 [32590] [6] DEBUG:      data: 50 45 52 4f 20 4f
4b                              PERO OK
2006-11-13 17:12:53 [32590] [6] DEBUG:    Octet string dump ends.
2006-11-13 17:12:53 [32590] [6] DEBUG: SMPP PDU dump ends.
2006-11-13 17:12:53 [32590] [6] ERROR: SMPP[1]: Mallformed addr `8585',
expected at least 7 digits.

As you can see, the dest-addr-ton = 1 .. although I configured it like this:

# SMSC SMPP = SMS CENTER
# RX Movistar Peru
group = smsc
smsc = smpp
smsc-id = 1
denied-smsc-id = 1
host = 200.37.161.238
port = 5018
transceiver-mode = 1
smsc-username = "eMobBr_R"
smsc-password = "XXXX"
system-type = "ESME"
address-range = "9696"
my-number = 8585
dest-addr-ton = 0
dest-addr-npi = 1

I hope somebody can help me solving this issue. Also I still receive an
error instead of a warning?

Thanks in advance!

Kind regards,
Roland.




Stipe Tolj wrote:
> Andreas Fink wrote:
>
>>> this is correct... since it's "semantically illegal" to use a 
>>> combination on TON=1 and addr value <7 digits. This would "mean", 
>>> that there exist an international destination number with less then 
>>> 7 digits, there is no such in real life.
>>
>>
>> Stipe, I have to disagree. Some countries might have short numbers
>> in  the international format that way.
>>
>> Think of +49112 as the international format of the emergecny code
>> 112  in germany (+49). This would make 5 digits.
>> or +88234 as a country code which we own, we could easily make 
>> +882345 as a pseudo international short ID with 6 digits.
>>
>> I would make this a warning, not an error.
>
> ok, sounds reasonable, even whie I'm not "sure" if a generic PLMN
> shortcode (ie. 112 for emergency) can be dial from outside the home
> network, hence using the country code prefix plus the shortcode. Can
> you dial "+49112" from Switzerland? ;)
>
> I'm +0 on this... so I'll change to a warning rather then error and
> refusing the PDU.
>
> Stipe
>
> -------------------------------------------------------------------
> Kölner Landstrasse 419
> 40589 Düsseldorf, NRW, Germany
>
> tolj.org system architecture      Kannel Software Foundation (KSF)
> http://www.tolj.org/              http://www.kannel.org/
>
> mailto:st_{at}_tolj.org           mailto:stolj_{at}_kannel.org
> -------------------------------------------------------------------
>
>