Re: RE: users Digest, Vol 12, Issue 2
bertrand vuaridel <[email protected]> Fri, 12 Mar 2004 17:36:40 +0100
| Newsgroups | gmane.comp.mobile.sms.tsms |
|---|---|
| Message-ID | <[email protected]> |
Dear Roger,
thanks a lot the init command make it work!
MDM_init_command = "&FE1Q0V1L1M1X5&C1&D2&S1&K3B20"
Bertrand
Crettol, Roger wrote:
>Hi !
>
>We operate an sms_client based on smsclient-2.0.9d, enhanced for client/server operations and the proper handling of HPUX serial ports.
>
>We use an SMS Large account at swisscom (just for availability reasons) and an ISDN attachment. This is the sms_modem file we use (with traces of earlier operations on standard dial-in connections and tests in a Linux environment) :
>
># --------------------------------------------------------------------
># SMS Modem Configuration file
># --------------------------------------------------------------------
>
>{
> # ------------------------------------------------------------
>
> MDM_lock_dir = "/var/opt/sms" # Lock directory
> # MDM_device = "ttyd0p2" # Modem Device Name RP2430
> MDM_device = "ttyd1p0" # Modem Device Name D380
>
> # for socket-based modem emulation (test & debug drivers):
> # emulator listening on UNIX socket /tmp/sms/ttyS0
> # MDM_socket_dir = "/tmp/sms" # Test sockets directory
>
> # Modem Device Name Examples:
> #
> # MDM_device = "term/00m" # UNIXWARE
> # MDM_device = "ttyS0" # Linux COM1
> # MDM_device = "ttyS1" # Linux COM2
> #
> # MDM_device = "cua/a" # SOLARIS
> # MDM_lock_platform = "SOLARIS" # Set this so that we generate
> # Solaris compatible lock file
> # names
>
> # ------------------------------------------------------------
>
> # MDM_pause_after_connect = 1000000 # needed for KPN UCP modems
> # Pause after the connection
>
> # MDM_pause_after_connect = 3000000 # Pause after the connection
> # string for 3 seconds
>
> MDM_pause_on_DELAYED = 60 # Pause when dial fails with
> # DELAYED condition, in secs.
>
> # ------------------------------------------------------------
>
> MDM_command_prefix = "AT"
>
> # --- ZyXel Modemino :
># MDM_init_command = "&FE1Q0V1X5S0=0S6=1S7=60S48=7S36=7&C1&D2&S1&K3&Q9"
> # --- US Robotics (from TelAlert Setups) :
># MDM_init_command = "AT&F&H2&I0E1Q0V1X4&A3S0=0S7=60&C1&D2&R1&S1&B1&M4&N6S7=4"
># MDM_init_command = "ZE1Q0V1"
># MDM_init_command = "Z"
># MDM_dial_command = "DT"
># MDM_number_prefix = "0" # Number to dial to get an
> # external line.
>
> # --- Omninet.D ISDN Modem :
> MDM_init_command = "&FE1Q0V1L1M1X5&C1&D2&S1&K3B20"
> MDM_dial_command = "DI"
> MDM_number_prefix = "" # Number to dial to get an
> # external line.
>
> MDM_set_local_echo_off = "E0"
> MDM_disable_echo_test = NO # Test and Set local echo
> # YES/NO
>
> # ------------------------------------------------------------
>
> MDM_dtr_hangup_sleep = 3000000 # How many microseconds should
> MDM_dtr_init_sleep = 1000000 # I lower DTR during
> # init/hangup
>
> MDM_max_rings = 7 # default = 4
>
> # ------------------------------------------------------------
>
> MDM_command_suffix = "\r"
> MDM_response_prefix = "\r\n"
> MDM_response_suffix = "\r\n"
>
> # ------------------------------------------------------------
>
> MDM_flow_control = "Hardware" # Software or Hardware
>
> # ------------------------------------------------------------
>
> MDM_hangup_command = "H0"
> MDM_attention_command = "+++"
> MDM_soft_hangup_retries = 0 # Number of times I should
> # continue sending hangup code
> # If 0 then don't bother
> # and rely on lowering DTR
>
> MDM_guard_time = 1750000 # Microsecond delay before and
> # After transmitting attention command
> MDM_esc_time = 125000 # Microsecond delay between each
> # character of the attention command
>
> # ------------------------------------------------------------
>
> MDM_lock_action = "BLOCK"
> MDM_lock_retry_delay = 5000000 # Microsecond delay to wait before
> # retrying for modem lock.
>
>}
>
>-------------------------------------------------------------
>
>Regards.
>
>-rg-
>
>-----Original Message-----
>From: [email protected] [mailto:[email protected]] On Behalf Of [email protected]
>Sent: Donnerstag, 11. März 2004 13:16
>To: [email protected]
>Subject: users Digest, Vol 12, Issue 2
>
>
>Send users mailing list submissions to
> [email protected]
>
>To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.smsclient.org./mailman/listinfo/users
>or, via email, send a message with subject or body 'help' to
> [email protected]
>
>You can reach the person managing the list at
> [email protected]
>
>When replying, please edit your Subject line so it is more specific than "Re: Contents of users digest..."
>
>
>Today's Topics:
>
> 1. modem & swisscom (bertrand vuaridel)
> 2. Re: modem & swisscom ([email protected])
> 3. Re: modem & swisscom (Roger Schreiter)
> 4. Re: modem & swisscom (bertrand vuaridel)
> 5. Re: modem & swisscom (bertrand vuaridel)
> 6. Re: modem & swisscom (Roger Schreiter)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Wed, 10 Mar 2004 18:13:33 +0100
>From: bertrand vuaridel <[email protected]>
>Subject: [sms_client] modem & swisscom
>To: [email protected]
>Message-ID: <[email protected]>
>Content-Type: text/plain; charset=us-ascii; format=flowed
>
>Does sms_client and ISDN modems work?
>I have managed to use sms_client work with analog modem. However in Switzerland, with swisscom, I did not manage to make it wotk with ISDN line by changing the SMS_centre_number :
>
>#SMS_centre_number = "0794998990" # SWISSCOM SMSC Number (Analog V.34) SMS_centre_number = "0900900941" # SWISSCOM SMSC Number (ISDN V.120)
>
>I have also changed the dial command from DT to DTI for ISDN:
> MDM_dial_command = "DTI"
>
>I always get:
>....
>Received Character: +4+
>Received Character: +1+
>Received Character: +<CR>+
>WARNING: read() Timeout
>ERROR: Timeout: searching for +<CR><LF>+ failed after 60 seconds Received String: +ATDTI0900900941<CR>+
>MODEM: Expecting CONNECT response - UNKOWN
>Removing Lockfile '/var/lock/LCK..ttyS0'
>
>
>Any idea?
>Note that Swiscom has confirmed that the number 0900900941 is correct
>for ISDN.
>
>Bertrand
>
>
>
>------------------------------
>
>Message: 2
>Date: Thu, 11 Mar 2004 08:36:59 +0100
>From: [email protected]
>Subject: Re: [sms_client] modem & swisscom
>To: Users of SMS Client SMS Gateway <[email protected]>
>Message-ID: <[email protected]>
>Content-Type: text/plain; charset=US-ASCII
>
>
>
>
>
>Hello Bertrand,
>
>sms_client works fine with Linux and ISDN Modem emulation (I4L). What is your OS and ISDN Modem?
>
>Hannes
>
>
>
>
>------------------------------
>
>Message: 3
>Date: Thu, 11 Mar 2004 08:59:49 +0100
>From: Roger Schreiter <[email protected]>
>Subject: Re: [sms_client] modem & swisscom
>To: Users of SMS Client SMS Gateway <[email protected]>
>Message-ID: <[email protected]>
>Content-Type: text/plain; charset=us-ascii; format=flowed
>
>bertrand vuaridel schrieb:
>
>
>>...
>>However in Switzerland, with swisscom, I did not manage to make it
>>wotk with ISDN line by changing the SMS_centre_number :
>>
>>#SMS_centre_number = "0794998990" # SWISSCOM SMSC Number (Analog
>>V.34) SMS_centre_number = "0900900941" # SWISSCOM SMSC Number (ISDN
>>V.120)
>>
>>
>...
>
>Hi,
>
>Try the "analog" number! The "ISDN" one neither worked
>for me (ISDN), but the "analog" one does. I'm also using
>I4L.
>
>
>Roger.
>
>
>
>
>
>------------------------------
>
>Message: 4
>Date: Thu, 11 Mar 2004 09:38:05 +0100
>From: bertrand vuaridel <[email protected]>
>Subject: Re: [sms_client] modem & swisscom
>To: Users of SMS Client SMS Gateway <[email protected]>
>Message-ID: <[email protected]>
>Content-Type: text/plain; charset=us-ascii; format=flowed
>
>Hi Hannes
>
>my OS is linux Debian
>my modem zyxel 2864I
>and I manage to use the analog swisscom number but not the ISDN one! thanks for your help
>
>Bertrand
>
>[email protected] wrote:
>
>
>
>>Hello Bertrand,
>>
>>sms_client works fine with Linux and ISDN Modem emulation (I4L). What
>>is your OS and ISDN Modem?
>>
>>Hannes
>>
>>
>>
>>--
>>
>>-----------------------------------------------------------------------
>>This is the SMSClient Users Mailman Mailing List
>>Please Post to: [email protected]
>>List Interface: http://mailman.smsclient.org./mailman/listinfo/users
>>List Archive: http://mailman.smsclient.org/mailman/private/users/
>>-----------------------------------------------------------------------
>>
>>
>>
>>
>>
>
>
>
>
>------------------------------
>
>Message: 5
>Date: Thu, 11 Mar 2004 09:42:40 +0100
>From: bertrand vuaridel <[email protected]>
>Subject: Re: [sms_client] modem & swisscom
>To: Users of SMS Client SMS Gateway <[email protected]>
>Message-ID: <[email protected]>
>Content-Type: text/plain; charset="us-ascii"
>
>Hello Roger,
>
>sms_client and ISDN is working according to other people. Swisscom claim that both the analog and ISDN number are supported and
>should work!
>I would really prefer to use an ISDN modem.
>
>Any Idea what we should modify in the config?
>
>Bertrand
>
>
>
>Roger Schreiter wrote:
>
>
>
>>bertrand vuaridel schrieb:
>>
>>
>>
>>>...
>>>However in Switzerland, with swisscom, I did not manage to make it
>>>wotk with ISDN line by changing the SMS_centre_number :
>>>
>>>#SMS_centre_number = "0794998990" # SWISSCOM SMSC Number (Analog
>>>V.34) SMS_centre_number = "0900900941" # SWISSCOM SMSC Number (ISDN
>>>V.120)
>>>
>>>
>>...
>>
>>Hi,
>>
>>Try the "analog" number! The "ISDN" one neither worked
>>for me (ISDN), but the "analog" one does. I'm also using
>>I4L.
>>
>>
>>Roger.
>>
>>
>>
>>
>>--
>>
>>----------------------------------------------------------------------
>>-
>>This is the SMSClient Users Mailman Mailing List
>>Please Post to: [email protected]
>>List Interface: http://mailman.smsclient.org./mailman/listinfo/users
>>List Archive: http://mailman.smsclient.org/mailman/private/users/
>>-----------------------------------------------------------------------
>>
>>
>>
>
>
>
--
bertrand vuaridel email: [email protected] <mailto:[email protected]>
director phone: +41 22 362 38 32
artegis direct: +41 22 362 92 01
fax: +41 22 362 38 36
web: http://www.artegis.com
nyon
switzerland
--
-----------------------------------------------------------------------