Re: *** Error *** , Packet was rejected by camera. Please contact <[email protected]>.
Dieter Blaas <[email protected]>
| Newsgroups | gmane.comp.multimedia.gphoto.devel |
|---|---|
| Message-ID | <[email protected]> |
Dear Marcus, thanks for your willingness to help! I am afraid that the camera is broken: With the old Windows software Cam2Com it works sometimes and sometimes not. I had such failures before and finally needed changing the camera. I was hoping that the problem could eventually be overcome with gphoto2...... I believe that there are no cameras of this particular type remaining on the planet: I bought them all :-( Best, Dieter ------------------------------------------------------------------------ Dieter Blaas, Max Perutz Laboratories Medical University of Vienna, Inst. Med. Biochem., Vienna Biocenter (VBC), Dr. Bohr Gasse 9/3, A-1030 Vienna, Austria, Tel: 0043 1 4277 61630, Mobile: 0043 699 1942 1659 e-mail: [email protected] ------------------------------------------------------------------------ On 21.07.2021 17:54, Marcus Meissner wrote: > Hi, > > It tries to do cause a sierra capture action, but receives status code 0x11 SIERRA_PACKET_INVALID > back. > > before it queries register 0x33 (card present) and receives 0x3 ... no idea what that means. > > I currently have still no good idea. Need to try with my Nikon Coolpix 2500 > to see if I can see something. > > But I have not much hope. > > Ciao, Marcus > > On Mon, Jul 12, 2021 at 03:30:19PM +0200, Dieter Blaas wrote: >> Dear Marcus, >> >> referring to my last mail I finally came back from vacations and run the >> command: "env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt >> --capture-image" >> >> The output is attached. Please note that it is an Olympus C-40Zoom and not, >> as reported by gphoto2, an Olympus C2040-Z. As I wrote already, changing the >> memory card for several other ones did not help and a new one is not >> available since long! It would be great if you found a way of getting it to >> run! >> >> Thanks a lot, best regards, Dieter >> >> ------------------------------------------------------------------------ >> Dieter Blaas, >> Max Perutz Laboratories >> Medical University of Vienna, >> Inst. Med. Biochem., Vienna Biocenter (VBC), >> Dr. Bohr Gasse 9/3, >> A-1030 Vienna, Austria, >> Tel: 0043 1 4277 61630, >> Mobile: 0043 699 1942 1659 >> e-mail: [email protected] >> ------------------------------------------------------------------------ >> >> On 22.06.2021 21:40, Dieter Blaas wrote: >>> Hi Marcus, >>> >>> thank you so much for the quick answer! I am afraid that this does not >>> help: I already tried replacing the card by another one (they are very >>> old and not available since long) but without avail. I am afraid that >>> something happened to the camera. I shall be on vacations for about 2 >>> weeks but shall come back to you with a debuglogfile. I find it quite >>> strange that all seems to work except from capturing a photo! >>> >>> Best. Dieter >>> >>> ------------------------------------------------------------------------ >>> Dieter Blaas, >>> Max Perutz Labora fdatories >>> Medical University of Vienna, >>> Inst. Med. Biochem., Vienna Biocenter (VBC), >>> Dr. Bohr Gasse 9/3, >>> A-1030 Vienna, Austria, >>> Tel: 0043 1 4277 61630, >>> Mobile: 0043 699 1942 1659 >>> e-mail: [email protected] >>> ------------------------------------------------------------------------ >>> >>> On 22.06.2021 17:20, Marcus Meissner wrote: >>>> On Tue, Jun 22, 2021 at 01:36:29AM +0200, Dieter Blaas wrote: >>>>> Hi, >>>>> >>>>> I installed gphoto2 from the repository under Ubuntu-Mate >>>>> 20.04 and >>>>> tried controlling an old Olympus C-40Z connected to a power >>>>> supply. I got >>>>> the following: >>>>> >>>>> 1) gphoto2 --list-config >>>>> /Camera Configuration/Picture Settings/resolution >>>>> /Camera Configuration/Picture Settings/shutter >>>>> /Camera Configuration/Picture Settings/aperture >>>>> /Camera Configuration/Picture Settings/color >>>>> /Camera Configuration/Picture Settings/flash >>>>> /Camera Configuration/Picture Settings/whitebalance >>>>> /Camera Configuration/Picture Settings/focus-mode >>>>> /Camera Configuration/Picture Settings/focus-pos >>>>> /Camera Configuration/Picture Settings/exp >>>>> /Camera Configuration/Picture Settings/exp-meter >>>>> /Camera Configuration/Picture Settings/zoom >>>>> /Camera Configuration/Picture Settings/dzoom >>>>> /Camera Configuration/Picture Settings/iso >>>>> /Camera Configuration/Camera Settings/date-time >>>>> /Camera Configuration/Camera Settings/lcd-mode >>>>> /Camera Configuration/Camera Settings/lcd-brightness >>>>> /Camera Configuration/Camera Settings/lcd-auto-shutoff >>>>> /Camera Configuration/Camera Settings/camera-power-save >>>>> /Camera Configuration/Camera Settings/host-power-save >>>>> /Camera Configuration/Camera Settings/timefmt >>>>> >>>>> 2) gphoto2 --summary >>>>> Camera summary: >>>>> Camera Model: SX553 >>>>> Manufacturer: OLYMPUS OPTICAL CO.,LTD. >>>>> Camera ID: SAUNA >>>>> Serial Number: 000203123086 >>>>> Software Rev.: v553p-73 >>>>> Frames Taken: 0 >>>>> Frames Left: 0 >>>>> Battery Life: 0 >>>>> Memory Left: 0 bytes >>>>> Date: Thu Jan 1 00:59:59 1970 >>>>> >>>>> 3) gphoto2 --capture-preview ------- WORKS >>>>> >>>>> 4) gphoto2 --capture-movie--------- WORKS >>>>> >>>>> 5) However, when evoking gphoto2 --capture-image-and-download or just >>>>> gphoto2 --capture-image >>>>> >>>>> I get: >>>>> >>>>> >>>>> *** Error *** >>>>> Packet was rejected by camera. Please contact >>>>> <[email protected]>. >>>>> ERROR: Could not capture image. >>>>> ERROR: Could not capture. >>>>> >>>>> What is wrong? So far I used Sabsik's Cam2Com running under >>>>> Windows XP to >>>>> control three identical cameras but wanted to finally migrate to Linux. >>>>> There is a problem with the memory card as the camera says that >>>>> it is full >>>>> and it refuses to format it. With Cam2Com I, therefore, used >>>>> direct download >>>>> without storing the image on the memory card. Is there a way of >>>>> doing so >>>>> under gphoto2 as well? Maybe the error is related to the >>>>> defective internal >>>>> storage. I must say that I have used a number of the same type >>>>> of camera >>>>> over the years as all finally ended with one or another defect >>>>> that made >>>>> them useless. But this one still worked! >>>> Currently our capture goes via card... >>>> >>>> Can you not try to buy another card as quick workaround? >>>> >>>> Also a debuglogfile might be useful, but it seems card related. >>>> >>>> ciao, Marcus >> 0.000020 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >> 0.000134 main (2): gphoto2 2.5.23 >> 0.000160 main (2): gphoto2 has been compiled with the following options: >> 0.000183 main (2): + gcc (C compiler used) >> 0.000204 main (2): + popt (mandatory, for handling command-line parameters) >> 0.000225 main (2): + exif (for displaying EXIF information) >> 0.000245 main (2): + cdk (for accessing configuration options) >> 0.000265 main (2): + aa (for displaying live previews) >> 0.000285 main (2): + jpeg (for displaying live previews in JPEG format) >> 0.000307 main (2): + readline (for easy navigation in the shell) >> 0.000337 main (2): libgphoto2 2.5.25 >> 0.000362 main (2): libgphoto2 has been compiled with the following options: >> 0.000387 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >> 0.000408 main (2): + gcc (C compiler used) >> 0.000430 main (2): + ltdl (for portable loading of camlibs) >> 0.000450 main (2): + EXIF (for special handling of EXIF files) >> 0.000479 main (2): libgphoto2_port 0.12.0 >> 0.000502 main (2): libgphoto2_port has been compiled with the following options: >> 0.000523 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >> 0.000544 main (2): + gcc (C compiler used) >> 0.000564 main (2): + ltdl (for portable loading of iolibs) >> 0.000584 main (2): + EXIF (for vusb) >> 0.000604 main (2): + USB (libusb1, for USB cameras) >> 0.000624 main (2): + serial (for serial cameras) >> 0.000644 main (2): + no resmgr (serial port access and locking) >> 0.000664 main (2): + no ttylock (serial port locking) >> 0.000684 main (2): + no lockdev (serial port locking) >> 0.000704 main (2): CAMLIBS env var not set, using compile-time default instead >> 0.000725 main (2): IOLIBS env var not set, using compile-time default instead >> 0.000744 main (2): invoked with following arguments: >> 0.000765 main (2): --debug >> 0.000786 main (2): --debug-logfile=my-logfile.txt >> 0.000806 main (2): --capture-tethered >> 0.000863 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >> 0.001001 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >> 0.001179 main (2): The user has not specified both a model and a port. Try to figure them out. >> 0.001208 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >> 0.001388 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.001820 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >> 0.001868 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >> 0.001915 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >> 0.002106 gp_port_library_list (2): found mtab fsname sysfs >> 0.002136 gp_port_library_list (2): found mtab fsname proc >> 0.002163 gp_port_library_list (2): found mtab fsname udev >> 0.002216 gp_port_library_list (2): found mtab fsname devpts >> 0.002244 gp_port_library_list (2): found mtab fsname tmpfs >> 0.002292 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >> 0.003458 gp_port_library_list (2): found mtab fsname /dev/loop0 >> 0.003647 gp_port_library_list (2): found mtab fsname securityfs >> 0.003733 gp_port_library_list (2): found mtab fsname tmpfs >> 0.003875 gp_port_library_list (2): found mtab fsname tmpfs >> 0.004016 gp_port_library_list (2): found mtab fsname tmpfs >> 0.004180 gp_port_library_list (2): found mtab fsname cgroup2 >> 0.004218 gp_port_library_list (2): found mtab fsname cgroup >> 0.004245 gp_port_library_list (2): found mtab fsname pstore >> 0.004371 gp_port_library_list (2): found mtab fsname efivarfs >> 0.004424 gp_port_library_list (2): found mtab fsname none >> 0.004473 gp_port_library_list (2): found mtab fsname cgroup >> 0.004501 gp_port_library_list (2): found mtab fsname cgroup >> 0.004527 gp_port_library_list (2): found mtab fsname cgroup >> 0.004554 gp_port_library_list (2): found mtab fsname cgroup >> 0.004581 gp_port_library_list (2): found mtab fsname cgroup >> 0.004607 gp_port_library_list (2): found mtab fsname cgroup >> 0.004634 gp_port_library_list (2): found mtab fsname cgroup >> 0.004660 gp_port_library_list (2): found mtab fsname cgroup >> 0.004688 gp_port_library_list (2): found mtab fsname cgroup >> 0.004716 gp_port_library_list (2): found mtab fsname cgroup >> 0.004742 gp_port_library_list (2): found mtab fsname cgroup >> 0.004829 gp_port_library_list (2): found mtab fsname systemd-1 >> 0.004856 gp_port_library_list (2): found mtab fsname hugetlbfs >> 0.004910 gp_port_library_list (2): found mtab fsname mqueue >> 0.004937 gp_port_library_list (2): found mtab fsname debugfs >> 0.004986 gp_port_library_list (2): found mtab fsname tracefs >> 0.005035 gp_port_library_list (2): found mtab fsname fusectl >> 0.005062 gp_port_library_list (2): found mtab fsname configfs >> 0.005117 gp_port_library_list (2): found mtab fsname /dev/loop1 >> 0.005163 gp_port_library_list (2): found mtab fsname /dev/loop2 >> 0.005207 gp_port_library_list (2): found mtab fsname /dev/loop3 >> 0.005252 gp_port_library_list (2): found mtab fsname /dev/loop4 >> 0.005295 gp_port_library_list (2): found mtab fsname /dev/loop5 >> 0.005339 gp_port_library_list (2): found mtab fsname /dev/loop6 >> 0.005384 gp_port_library_list (2): found mtab fsname /dev/loop8 >> 0.005427 gp_port_library_list (2): found mtab fsname /dev/loop7 >> 0.005531 gp_port_library_list (2): found mtab fsname /dev/loop10 >> 0.005577 gp_port_library_list (2): found mtab fsname /dev/loop9 >> 0.005623 gp_port_library_list (2): found mtab fsname /dev/loop11 >> 0.005667 gp_port_library_list (2): found mtab fsname /dev/loop12 >> 0.005710 gp_port_library_list (2): found mtab fsname /dev/loop13 >> 0.005754 gp_port_library_list (2): found mtab fsname /dev/loop14 >> 0.005797 gp_port_library_list (2): found mtab fsname /dev/loop15 >> 0.005841 gp_port_library_list (2): found mtab fsname /dev/loop16 >> 0.005884 gp_port_library_list (2): found mtab fsname /dev/loop17 >> 0.005927 gp_port_library_list (2): found mtab fsname /dev/loop18 >> 0.005971 gp_port_library_list (2): found mtab fsname /dev/loop19 >> 0.006014 gp_port_library_list (2): found mtab fsname /dev/loop20 >> 0.006059 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >> 0.006102 gp_port_library_list (2): found mtab fsname tmpfs >> 0.006159 gp_port_library_list (2): found mtab fsname gvfsd-fuse >> 0.006280 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.006306 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006664 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006693 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006717 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006766 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006789 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007586 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007623 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007646 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007669 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007693 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007715 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007738 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007760 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007783 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007806 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007828 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007851 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007873 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007896 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007918 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007941 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007963 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007986 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008009 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008031 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008053 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008076 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008099 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008122 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008145 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008188 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008211 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008235 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008258 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008281 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008304 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008327 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008351 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008374 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.008396 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.022933 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.023004 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.023040 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,012') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.023072 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >> 0.023688 foreach_func (2): Loaded 'USB Mass Storage direct IO' ('usbdiskdirect:/dev/sda') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >> 0.023720 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >> 0.024203 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >> 0.024235 gp_port_info_list_count (2): Counting entries (44 available)... >> 0.024256 gp_port_info_list_count (2): 39 regular entries available. >> 0.024307 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >> 0.024449 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >> 0.024472 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >> 0.024491 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >> 0.024510 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >> 0.024529 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >> 0.024548 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >> 0.024566 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >> 0.024585 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >> 0.024604 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >> 0.024622 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >> 0.024640 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >> 0.024659 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >> 0.024677 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >> 0.024719 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >> 0.024740 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >> 0.024760 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >> 0.024779 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >> 0.024798 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >> 0.024821 gp_abilities_list_load_dir (2): Found 18 camera drivers. >> 0.072571 gp_port_info_list_count (2): Counting entries (44 available)... >> 0.072659 gp_port_info_list_count (2): 39 regular entries available. >> 0.072680 gp_port_new (2): Creating new device... >> 0.072706 gp_port_info_list_get_info (2): Getting info of entry 0 (44 available)... >> 0.073094 gp_port_set_settings (2): Setting settings... >> 0.073121 gp_port_info_list_get_info (2): Getting info of entry 1 (44 available)... >> 0.073365 gp_port_set_settings (2): Setting settings... >> 0.073389 gp_port_info_list_get_info (2): Getting info of entry 2 (44 available)... >> 0.073663 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.073685 gp_port_set_settings (2): Setting settings... >> 0.073706 gp_port_info_list_get_info (2): Getting info of entry 3 (44 available)... >> 0.073957 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.073979 gp_port_set_settings (2): Setting settings... >> 0.073999 gp_port_info_list_get_info (2): Getting info of entry 4 (44 available)... >> 0.074248 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.074269 gp_port_set_settings (2): Setting settings... >> 0.074290 gp_port_info_list_get_info (2): Getting info of entry 5 (44 available)... >> 0.074536 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.074558 gp_port_set_settings (2): Setting settings... >> 0.074578 gp_port_info_list_get_info (2): Getting info of entry 6 (44 available)... >> 0.075281 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.075310 gp_port_set_settings (2): Setting settings... >> 0.075331 gp_port_info_list_get_info (2): Getting info of entry 7 (44 available)... >> 0.075607 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.075629 gp_port_set_settings (2): Setting settings... >> 0.075650 gp_port_info_list_get_info (2): Getting info of entry 8 (44 available)... >> 0.075898 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.075920 gp_port_set_settings (2): Setting settings... >> 0.075940 gp_port_info_list_get_info (2): Getting info of entry 9 (44 available)... >> 0.076188 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076210 gp_port_set_settings (2): Setting settings... >> 0.076230 gp_port_info_list_get_info (2): Getting info of entry 10 (44 available)... >> 0.076476 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076499 gp_port_set_settings (2): Setting settings... >> 0.076519 gp_port_info_list_get_info (2): Getting info of entry 11 (44 available)... >> 0.076768 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076790 gp_port_set_settings (2): Setting settings... >> 0.076810 gp_port_info_list_get_info (2): Getting info of entry 12 (44 available)... >> 0.077059 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077080 gp_port_set_settings (2): Setting settings... >> 0.077102 gp_port_info_list_get_info (2): Getting info of entry 13 (44 available)... >> 0.077350 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077372 gp_port_set_settings (2): Setting settings... >> 0.077392 gp_port_info_list_get_info (2): Getting info of entry 14 (44 available)... >> 0.077642 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077663 gp_port_set_settings (2): Setting settings... >> 0.077709 gp_port_info_list_get_info (2): Getting info of entry 15 (44 available)... >> 0.077964 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077986 gp_port_set_settings (2): Setting settings... >> 0.078006 gp_port_info_list_get_info (2): Getting info of entry 16 (44 available)... >> 0.078253 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078274 gp_port_set_settings (2): Setting settings... >> 0.078294 gp_port_info_list_get_info (2): Getting info of entry 17 (44 available)... >> 0.078547 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078570 gp_port_set_settings (2): Setting settings... >> 0.078591 gp_port_info_list_get_info (2): Getting info of entry 18 (44 available)... >> 0.078871 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078898 gp_port_set_settings (2): Setting settings... >> 0.078919 gp_port_info_list_get_info (2): Getting info of entry 19 (44 available)... >> 0.079176 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079198 gp_port_set_settings (2): Setting settings... >> 0.079218 gp_port_info_list_get_info (2): Getting info of entry 20 (44 available)... >> 0.079464 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079486 gp_port_set_settings (2): Setting settings... >> 0.079506 gp_port_info_list_get_info (2): Getting info of entry 21 (44 available)... >> 0.079750 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079772 gp_port_set_settings (2): Setting settings... >> 0.079792 gp_port_info_list_get_info (2): Getting info of entry 22 (44 available)... >> 0.080036 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080057 gp_port_set_settings (2): Setting settings... >> 0.080077 gp_port_info_list_get_info (2): Getting info of entry 23 (44 available)... >> 0.080322 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080343 gp_port_set_settings (2): Setting settings... >> 0.080364 gp_port_info_list_get_info (2): Getting info of entry 24 (44 available)... >> 0.080610 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080631 gp_port_set_settings (2): Setting settings... >> 0.080652 gp_port_info_list_get_info (2): Getting info of entry 25 (44 available)... >> 0.080897 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080918 gp_port_set_settings (2): Setting settings... >> 0.080938 gp_port_info_list_get_info (2): Getting info of entry 26 (44 available)... >> 0.081186 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081207 gp_port_set_settings (2): Setting settings... >> 0.081227 gp_port_info_list_get_info (2): Getting info of entry 27 (44 available)... >> 0.081473 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081494 gp_port_set_settings (2): Setting settings... >> 0.081515 gp_port_info_list_get_info (2): Getting info of entry 28 (44 available)... >> 0.081761 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081783 gp_port_set_settings (2): Setting settings... >> 0.081803 gp_port_info_list_get_info (2): Getting info of entry 29 (44 available)... >> 0.082048 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082069 gp_port_set_settings (2): Setting settings... >> 0.082089 gp_port_info_list_get_info (2): Getting info of entry 30 (44 available)... >> 0.082334 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082355 gp_port_set_settings (2): Setting settings... >> 0.082375 gp_port_info_list_get_info (2): Getting info of entry 31 (44 available)... >> 0.082620 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082642 gp_port_set_settings (2): Setting settings... >> 0.082662 gp_port_info_list_get_info (2): Getting info of entry 32 (44 available)... >> 0.082922 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082966 gp_port_set_settings (2): Setting settings... >> 0.082987 gp_port_info_list_get_info (2): Getting info of entry 33 (44 available)... >> 0.083244 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083266 gp_port_set_settings (2): Setting settings... >> 0.083286 gp_port_info_list_get_info (2): Getting info of entry 34 (44 available)... >> 0.083534 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083555 gp_port_set_settings (2): Setting settings... >> 0.083575 gp_port_info_list_get_info (2): Getting info of entry 35 (44 available)... >> 0.096672 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.096724 gp_port_set_settings (2): Setting settings... >> 0.096764 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >> 0.096784 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.096804 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.097904 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.098746 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.098915 gp_port_info_list_get_info (2): Getting info of entry 36 (44 available)... >> 0.112959 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.113033 gp_port_set_settings (2): Setting settings... >> 0.113079 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,012, (new int=0, conf=-1, alt=-1) port usb:001,012 >> 0.113102 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.113125 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.114387 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.115358 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.115481 gp_port_info_list_get_info (2): Getting info of entry 37 (44 available)... >> 0.116528 gp_port_set_settings (2): Setting settings... >> 0.116569 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.116872 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >> 0.117252 gp_port_set_settings (2): Setting settings... >> 0.117281 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.118618 gp_abilities_list_detect_usb(2): Found 'Olympus C-2040Z' (0x7b4,0x105) >> 0.118644 gp_port_free (2): Freeing port... >> 0.118664 gp_port_close (2): Closing port... >> 0.119051 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >> 0.119085 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >> 0.119109 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >> 0.119393 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (44 entries available)... >> 0.119420 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >> 0.119442 gp_camera_set_port_info (2): Setting port info for port 'USB Mass Storage raw SCSI' at 'usbscsi:/dev/sg0'... >> 0.119818 gp_port_set_settings (2): Setting settings... >> 0.119853 gp_setting_set (2): Setting key 'port' to value 'usbscsi:/dev/sg0' (gphoto2) >> 0.119876 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >> 0.120187 gp_camera_init (2): Initializing camera... >> 0.120214 gp_camera_init (2): Loading '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'... >> 0.120690 gp_port_open (2): Opening port... >> 0.120798 gp_port_usbscsi_lock (2): Trying to lock '/dev/sg0'... >> 0.120850 gp_port_set_settings (2): Setting settings... >> 0.120874 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >> 0.120897 sierra/sierra/library.c (2): Sending initialization sequence to the camera >> 0.120961 sierra/sierra/sierra.c (2): Establishing connection >> 0.120984 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.121006 sierra/sierra/library.c (2): sierra_get_int_register: register 0x01... >> 0.121027 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.121047 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.121073 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.121108 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.121130 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.122060 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.122095 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.122134 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >> 0.122172 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >> >> 0.122220 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 02 00 01 01 02 00- .C...... >> >> 0.122254 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.124355 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.124444 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.124488 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.124524 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.126617 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.126665 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.126689 sierra/sierra/library.c (2): Reading packet... >> 0.126715 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.126734 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.126758 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.126782 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.126831 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.190759 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.190968 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.191069 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.191148 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.193852 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.193959 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >> >> 0.194032 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.194119 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >> >> 0.194195 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.196697 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.196837 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 03 00 04 00 0d 00 00 00-0d 00 .......... >> >> 0.196993 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.197079 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.197155 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.199778 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.199887 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.199956 sierra/sierra/library.c (2): Packet successfully read. >> 0.200030 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >> 0.200094 sierra/sierra/library.c (2): Value of register 0x01: 0x0d. >> 0.200164 sierra/sierra/library.c (2): Writing acknowledgement... >> 0.200233 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.200297 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.200379 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.200503 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.200573 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.202502 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.202616 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.202699 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >> 0.202780 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.202960 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 06 - . >> >> 0.203037 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.204614 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.204702 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.204790 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.204864 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.207671 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.207777 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.207851 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >> 0.207928 sierra/sierra/library.c (2): Read value of register 0x01 and wrote acknowledgement. Returning. >> 0.207999 gp_port_set_timeout (2): Setting port timeout to 50 milliseconds. >> 0.208075 sierra/sierra/library.c (2): sierra_set_string_register: reg 84, value '\' >> 0.208144 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.208210 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.208290 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.208337 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.208379 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.220383 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.220529 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.220613 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >> 0.220705 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >> >> 0.220812 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 03 00 03 54 5c b3-00 .C...T\.. >> >> 0.220990 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.222478 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.222613 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.222710 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.222795 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.224056 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.224162 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.224241 sierra/sierra/library.c (2): Reading packet... >> 0.224316 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.224381 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.224462 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.224546 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.224615 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.225824 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.225911 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.225999 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.226070 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.227821 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.227933 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >> >> 0.228005 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.228089 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.228134 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.230665 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.230790 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 06 - . >> >> 0.230938 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.231009 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.231054 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.233466 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.233566 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.233650 sierra/sierra/library.c (2): Packet type 0x06 read. Returning GP_OK. >> 0.233718 sierra/sierra/library.c (2): Packet successfully read. >> 0.233785 sierra/sierra/library.c (2): Transmission successful. >> 0.233853 sierra/sierra/sierra.c (2): *** folder support: yes >> 0.233929 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >> 0.233998 sierra/sierra/sierra.c (2): Closing connection >> 0.234063 sierra/sierra/sierra.c (2): ****************** sierra initialization OK >> 0.235950 gp_camera_free (2): Freeing camera... >> 0.236023 gp_camera_exit (2): Exiting camera ('Olympus C-2040Z')... >> 0.236121 sierra/sierra/sierra.c (2): sierra camera_exit >> 0.236171 gp_port_close (2): Closing port... >> 0.236431 gp_filesystem_reset (2): resetting filesystem >> 0.236487 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >> 0.236535 gp_filesystem_lru_clear (2): fscache LRU list already empty >> 0.236568 delete_all_folders (2): Internally deleting all folders from '/'... >> 0.236604 lookup_folder (2): Lookup folder '/'... >> 0.236640 lookup_folder (2): Found! / is 0x556fb4912890 >> 0.236674 recurse_delete_folder (2): Recurse delete folder 0x556fb4912890// >> 0.236710 delete_all_files (2): Delete all files in folder 0x556fb4912890// >> 0.236744 gp_port_free (2): Freeing port... >> 0.236775 gp_port_close (2): Closing port... >> 0.236881 gp_filesystem_reset (2): resetting filesystem >> 0.236919 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >> 0.236951 gp_filesystem_lru_clear (2): fscache LRU list already empty >> 0.236983 delete_all_folders (2): Internally deleting all folders from '/'... >> 0.237014 lookup_folder (2): Lookup folder '/'... >> 0.237047 lookup_folder (2): Found! / is 0x556fb4912890 >> 0.237081 recurse_delete_folder (2): Recurse delete folder 0x556fb4912890// >> 0.237114 delete_all_files (2): Delete all files in folder 0x556fb4912890// >> 0.000020 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >> 0.000166 main (2): gphoto2 2.5.23 >> 0.000196 main (2): gphoto2 has been compiled with the following options: >> 0.000222 main (2): + gcc (C compiler used) >> 0.000245 main (2): + popt (mandatory, for handling command-line parameters) >> 0.000268 main (2): + exif (for displaying EXIF information) >> 0.000291 main (2): + cdk (for accessing configuration options) >> 0.000315 main (2): + aa (for displaying live previews) >> 0.000338 main (2): + jpeg (for displaying live previews in JPEG format) >> 0.000361 main (2): + readline (for easy navigation in the shell) >> 0.000396 main (2): libgphoto2 2.5.25 >> 0.000422 main (2): libgphoto2 has been compiled with the following options: >> 0.000449 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >> 0.000471 main (2): + gcc (C compiler used) >> 0.000493 main (2): + ltdl (for portable loading of camlibs) >> 0.000515 main (2): + EXIF (for special handling of EXIF files) >> 0.000547 main (2): libgphoto2_port 0.12.0 >> 0.000573 main (2): libgphoto2_port has been compiled with the following options: >> 0.000596 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >> 0.000618 main (2): + gcc (C compiler used) >> 0.000640 main (2): + ltdl (for portable loading of iolibs) >> 0.000662 main (2): + EXIF (for vusb) >> 0.000684 main (2): + USB (libusb1, for USB cameras) >> 0.000706 main (2): + serial (for serial cameras) >> 0.000728 main (2): + no resmgr (serial port access and locking) >> 0.000751 main (2): + no ttylock (serial port locking) >> 0.000773 main (2): + no lockdev (serial port locking) >> 0.000795 main (2): CAMLIBS env var not set, using compile-time default instead >> 0.000817 main (2): IOLIBS env var not set, using compile-time default instead >> 0.000839 main (2): invoked with following arguments: >> 0.000891 main (2): --debug >> 0.000914 main (2): --debug-logfile=my-logfile.txt >> 0.000935 main (2): --capture-tethered >> 0.000998 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >> 0.001137 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >> 0.001366 main (2): The user has not specified both a model and a port. Try to figure them out. >> 0.001406 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >> 0.001614 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.002080 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >> 0.002136 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >> 0.002184 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >> 0.002379 gp_port_library_list (2): found mtab fsname sysfs >> 0.002409 gp_port_library_list (2): found mtab fsname proc >> 0.002438 gp_port_library_list (2): found mtab fsname udev >> 0.002491 gp_port_library_list (2): found mtab fsname devpts >> 0.002521 gp_port_library_list (2): found mtab fsname tmpfs >> 0.002572 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >> 0.003261 gp_port_library_list (2): found mtab fsname /dev/loop0 >> 0.003347 gp_port_library_list (2): found mtab fsname securityfs >> 0.003377 gp_port_library_list (2): found mtab fsname tmpfs >> 0.003436 gp_port_library_list (2): found mtab fsname tmpfs >> 0.003490 gp_port_library_list (2): found mtab fsname tmpfs >> 0.003552 gp_port_library_list (2): found mtab fsname cgroup2 >> 0.003582 gp_port_library_list (2): found mtab fsname cgroup >> 0.003610 gp_port_library_list (2): found mtab fsname pstore >> 0.003743 gp_port_library_list (2): found mtab fsname efivarfs >> 0.003797 gp_port_library_list (2): found mtab fsname none >> 0.003847 gp_port_library_list (2): found mtab fsname cgroup >> 0.003876 gp_port_library_list (2): found mtab fsname cgroup >> 0.003904 gp_port_library_list (2): found mtab fsname cgroup >> 0.003932 gp_port_library_list (2): found mtab fsname cgroup >> 0.003960 gp_port_library_list (2): found mtab fsname cgroup >> 0.003987 gp_port_library_list (2): found mtab fsname cgroup >> 0.004015 gp_port_library_list (2): found mtab fsname cgroup >> 0.004043 gp_port_library_list (2): found mtab fsname cgroup >> 0.004071 gp_port_library_list (2): found mtab fsname cgroup >> 0.004099 gp_port_library_list (2): found mtab fsname cgroup >> 0.004126 gp_port_library_list (2): found mtab fsname cgroup >> 0.004234 gp_port_library_list (2): found mtab fsname systemd-1 >> 0.004263 gp_port_library_list (2): found mtab fsname hugetlbfs >> 0.004319 gp_port_library_list (2): found mtab fsname mqueue >> 0.004349 gp_port_library_list (2): found mtab fsname debugfs >> 0.004400 gp_port_library_list (2): found mtab fsname tracefs >> 0.004451 gp_port_library_list (2): found mtab fsname fusectl >> 0.004480 gp_port_library_list (2): found mtab fsname configfs >> 0.004538 gp_port_library_list (2): found mtab fsname /dev/loop1 >> 0.004586 gp_port_library_list (2): found mtab fsname /dev/loop2 >> 0.004635 gp_port_library_list (2): found mtab fsname /dev/loop3 >> 0.004682 gp_port_library_list (2): found mtab fsname /dev/loop4 >> 0.004730 gp_port_library_list (2): found mtab fsname /dev/loop5 >> 0.004775 gp_port_library_list (2): found mtab fsname /dev/loop6 >> 0.004820 gp_port_library_list (2): found mtab fsname /dev/loop8 >> 0.004865 gp_port_library_list (2): found mtab fsname /dev/loop7 >> 0.004974 gp_port_library_list (2): found mtab fsname /dev/loop10 >> 0.005021 gp_port_library_list (2): found mtab fsname /dev/loop9 >> 0.005067 gp_port_library_list (2): found mtab fsname /dev/loop11 >> 0.005145 gp_port_library_list (2): found mtab fsname /dev/loop12 >> 0.005191 gp_port_library_list (2): found mtab fsname /dev/loop13 >> 0.005238 gp_port_library_list (2): found mtab fsname /dev/loop14 >> 0.005283 gp_port_library_list (2): found mtab fsname /dev/loop15 >> 0.005369 gp_port_library_list (2): found mtab fsname /dev/loop16 >> 0.005415 gp_port_library_list (2): found mtab fsname /dev/loop17 >> 0.005469 gp_port_library_list (2): found mtab fsname /dev/loop18 >> 0.005508 gp_port_library_list (2): found mtab fsname /dev/loop19 >> 0.005548 gp_port_library_list (2): found mtab fsname /dev/loop20 >> 0.005588 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >> 0.005626 gp_port_library_list (2): found mtab fsname tmpfs >> 0.005679 gp_port_library_list (2): found mtab fsname gvfsd-fuse >> 0.005802 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.005825 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006162 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006189 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006210 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006229 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006249 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006893 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006925 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007136 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007161 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007185 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007206 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007226 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007249 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007269 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007290 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007311 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007331 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007352 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007372 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007392 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007412 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007463 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007484 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007505 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007525 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007545 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007565 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007585 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007605 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007626 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007645 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007665 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007686 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007706 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007726 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007745 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007765 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007786 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007806 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007825 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.023548 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.023611 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.023636 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,012') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.023658 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >> 0.024379 foreach_func (2): Loaded 'USB Mass Storage direct IO' ('usbdiskdirect:/dev/sda') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >> 0.024427 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >> 0.024999 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >> 0.025035 gp_port_info_list_count (2): Counting entries (44 available)... >> 0.025059 gp_port_info_list_count (2): 39 regular entries available. >> 0.025143 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >> 0.025297 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >> 0.025354 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >> 0.025380 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >> 0.025402 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >> 0.025424 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >> 0.025446 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >> 0.025467 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >> 0.025488 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >> 0.025508 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >> 0.025528 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >> 0.025549 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >> 0.025570 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >> 0.025591 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >> 0.025612 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >> 0.025633 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >> 0.025655 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >> 0.025677 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >> 0.025698 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >> 0.025723 gp_abilities_list_load_dir (2): Found 18 camera drivers. >> 0.076470 gp_port_info_list_count (2): Counting entries (44 available)... >> 0.076569 gp_port_info_list_count (2): 39 regular entries available. >> 0.076594 gp_port_new (2): Creating new device... >> 0.076622 gp_port_info_list_get_info (2): Getting info of entry 0 (44 available)... >> 0.077042 gp_port_set_settings (2): Setting settings... >> 0.077072 gp_port_info_list_get_info (2): Getting info of entry 1 (44 available)... >> 0.077410 gp_port_set_settings (2): Setting settings... >> 0.077447 gp_port_info_list_get_info (2): Getting info of entry 2 (44 available)... >> 0.077804 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077835 gp_port_set_settings (2): Setting settings... >> 0.077858 gp_port_info_list_get_info (2): Getting info of entry 3 (44 available)... >> 0.078145 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078170 gp_port_set_settings (2): Setting settings... >> 0.078193 gp_port_info_list_get_info (2): Getting info of entry 4 (44 available)... >> 0.078471 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078495 gp_port_set_settings (2): Setting settings... >> 0.078517 gp_port_info_list_get_info (2): Getting info of entry 5 (44 available)... >> 0.078794 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078817 gp_port_set_settings (2): Setting settings... >> 0.078840 gp_port_info_list_get_info (2): Getting info of entry 6 (44 available)... >> 0.079120 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079144 gp_port_set_settings (2): Setting settings... >> 0.079167 gp_port_info_list_get_info (2): Getting info of entry 7 (44 available)... >> 0.079445 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079469 gp_port_set_settings (2): Setting settings... >> 0.079493 gp_port_info_list_get_info (2): Getting info of entry 8 (44 available)... >> 0.079772 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079824 gp_port_set_settings (2): Setting settings... >> 0.079847 gp_port_info_list_get_info (2): Getting info of entry 9 (44 available)... >> 0.080130 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080154 gp_port_set_settings (2): Setting settings... >> 0.080177 gp_port_info_list_get_info (2): Getting info of entry 10 (44 available)... >> 0.080456 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080480 gp_port_set_settings (2): Setting settings... >> 0.080503 gp_port_info_list_get_info (2): Getting info of entry 11 (44 available)... >> 0.080782 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080806 gp_port_set_settings (2): Setting settings... >> 0.080829 gp_port_info_list_get_info (2): Getting info of entry 12 (44 available)... >> 0.081109 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081136 gp_port_set_settings (2): Setting settings... >> 0.081160 gp_port_info_list_get_info (2): Getting info of entry 13 (44 available)... >> 0.081482 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081514 gp_port_set_settings (2): Setting settings... >> 0.081537 gp_port_info_list_get_info (2): Getting info of entry 14 (44 available)... >> 0.081819 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081843 gp_port_set_settings (2): Setting settings... >> 0.081865 gp_port_info_list_get_info (2): Getting info of entry 15 (44 available)... >> 0.082142 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082166 gp_port_set_settings (2): Setting settings... >> 0.082189 gp_port_info_list_get_info (2): Getting info of entry 16 (44 available)... >> 0.082465 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082488 gp_port_set_settings (2): Setting settings... >> 0.082511 gp_port_info_list_get_info (2): Getting info of entry 17 (44 available)... >> 0.082787 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082811 gp_port_set_settings (2): Setting settings... >> 0.082834 gp_port_info_list_get_info (2): Getting info of entry 18 (44 available)... >> 0.083112 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083136 gp_port_set_settings (2): Setting settings... >> 0.083159 gp_port_info_list_get_info (2): Getting info of entry 19 (44 available)... >> 0.083438 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083460 gp_port_set_settings (2): Setting settings... >> 0.083480 gp_port_info_list_get_info (2): Getting info of entry 20 (44 available)... >> 0.083727 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083748 gp_port_set_settings (2): Setting settings... >> 0.083768 gp_port_info_list_get_info (2): Getting info of entry 21 (44 available)... >> 0.084015 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.084037 gp_port_set_settings (2): Setting settings... >> 0.084057 gp_port_info_list_get_info (2): Getting info of entry 22 (44 available)... >> 0.084307 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.084332 gp_port_set_settings (2): Setting settings... >> 0.084353 gp_port_info_list_get_info (2): Getting info of entry 23 (44 available)... >> 0.084628 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.084657 gp_port_set_settings (2): Setting settings... >> 0.084678 gp_port_info_list_get_info (2): Getting info of entry 24 (44 available)... >> 0.084973 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.085000 gp_port_set_settings (2): Setting settings... >> 0.085021 gp_port_info_list_get_info (2): Getting info of entry 25 (44 available)... >> 0.085288 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.085333 gp_port_set_settings (2): Setting settings... >> 0.085355 gp_port_info_list_get_info (2): Getting info of entry 26 (44 available)... >> 0.085652 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.085726 gp_port_set_settings (2): Setting settings... >> 0.085749 gp_port_info_list_get_info (2): Getting info of entry 27 (44 available)... >> 0.086080 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.086108 gp_port_set_settings (2): Setting settings... >> 0.086130 gp_port_info_list_get_info (2): Getting info of entry 28 (44 available)... >> 0.086394 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.086417 gp_port_set_settings (2): Setting settings... >> 0.086438 gp_port_info_list_get_info (2): Getting info of entry 29 (44 available)... >> 0.086736 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.086766 gp_port_set_settings (2): Setting settings... >> 0.086788 gp_port_info_list_get_info (2): Getting info of entry 30 (44 available)... >> 0.087060 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.087082 gp_port_set_settings (2): Setting settings... >> 0.087103 gp_port_info_list_get_info (2): Getting info of entry 31 (44 available)... >> 0.087372 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.087398 gp_port_set_settings (2): Setting settings... >> 0.087419 gp_port_info_list_get_info (2): Getting info of entry 32 (44 available)... >> 0.087685 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.087707 gp_port_set_settings (2): Setting settings... >> 0.087727 gp_port_info_list_get_info (2): Getting info of entry 33 (44 available)... >> 0.087977 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.087998 gp_port_set_settings (2): Setting settings... >> 0.088019 gp_port_info_list_get_info (2): Getting info of entry 34 (44 available)... >> 0.088265 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.088286 gp_port_set_settings (2): Setting settings... >> 0.088306 gp_port_info_list_get_info (2): Getting info of entry 35 (44 available)... >> 0.100850 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.100908 gp_port_set_settings (2): Setting settings... >> 0.100951 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >> 0.100972 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.100992 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.102154 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.103002 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.103121 gp_port_info_list_get_info (2): Getting info of entry 36 (44 available)... >> 0.116982 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.117037 gp_port_set_settings (2): Setting settings... >> 0.117077 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,012, (new int=0, conf=-1, alt=-1) port usb:001,012 >> 0.117097 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.117118 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.118408 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.119290 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.119417 gp_port_info_list_get_info (2): Getting info of entry 37 (44 available)... >> 0.120355 gp_port_set_settings (2): Setting settings... >> 0.120397 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.120667 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >> 0.121021 gp_port_set_settings (2): Setting settings... >> 0.121046 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.122373 gp_abilities_list_detect_usb(2): Found 'Olympus C-2040Z' (0x7b4,0x105) >> 0.122407 gp_port_free (2): Freeing port... >> 0.122456 gp_port_close (2): Closing port... >> 0.122801 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >> 0.122827 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >> 0.122851 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >> 0.123125 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (44 entries available)... >> 0.123152 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >> 0.123174 gp_camera_set_port_info (2): Setting port info for port 'USB Mass Storage raw SCSI' at 'usbscsi:/dev/sg0'... >> 0.123553 gp_port_set_settings (2): Setting settings... >> 0.123588 gp_setting_set (2): Setting key 'port' to value 'usbscsi:/dev/sg0' (gphoto2) >> 0.123611 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >> 0.123920 gp_camera_init (2): Initializing camera... >> 0.123943 gp_camera_init (2): Loading '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'... >> 0.124400 gp_port_open (2): Opening port... >> 0.124503 gp_port_usbscsi_lock (2): Trying to lock '/dev/sg0'... >> 0.124554 gp_port_set_settings (2): Setting settings... >> 0.124579 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >> 0.124600 sierra/sierra/library.c (2): Sending initialization sequence to the camera >> 0.124650 sierra/sierra/sierra.c (2): Establishing connection >> 0.124671 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.124694 sierra/sierra/library.c (2): sierra_get_int_register: register 0x01... >> 0.124714 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.124733 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.124759 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.124783 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.124804 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.125586 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.125618 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.125642 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >> 0.125667 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >> >> 0.125697 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 02 00 01 01 02 00- .C...... >> >> 0.125718 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.126838 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.126892 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.126918 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.126939 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.128621 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.128667 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.128700 sierra/sierra/library.c (2): Reading packet... >> 0.128732 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.128761 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.128797 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.128832 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.128907 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.191397 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.191584 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.191668 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.191734 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.193818 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.193968 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >> >> 0.194041 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.194128 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >> >> 0.194203 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.195428 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.195595 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 03 00 04 00 0d 00 00 00-0d 00 .......... >> >> 0.195671 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.195755 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.195828 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.197013 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.197132 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.197210 sierra/sierra/library.c (2): Packet successfully read. >> 0.197287 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >> 0.197438 sierra/sierra/library.c (2): Value of register 0x01: 0x0d. >> 0.197519 sierra/sierra/library.c (2): Writing acknowledgement... >> 0.197594 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.197705 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.197786 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.197866 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.197937 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.198766 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.198854 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.198938 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >> 0.199021 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.199122 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 06 - . >> >> 0.199194 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.200480 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.200595 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.200639 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.200675 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.203522 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.203640 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.203678 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >> 0.203715 sierra/sierra/library.c (2): Read value of register 0x01 and wrote acknowledgement. Returning. >> 0.203749 gp_port_set_timeout (2): Setting port timeout to 50 milliseconds. >> 0.203784 sierra/sierra/library.c (2): sierra_set_string_register: reg 84, value '\' >> 0.203817 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.203848 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.203887 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.203925 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.203959 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.215431 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.215552 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.215613 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >> 0.215681 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >> >> 0.215765 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 03 00 03 54 5c b3-00 .C...T\.. >> >> 0.215822 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.217357 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.217428 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.217495 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.217553 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.219182 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.219267 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.219325 sierra/sierra/library.c (2): Reading packet... >> 0.219381 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.219432 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.219492 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.219551 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.219605 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.221389 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.221502 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.221543 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.221575 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.223187 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.223253 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >> >> 0.223299 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.223352 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.223396 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.224711 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.224790 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 06 - . >> >> 0.224868 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.224909 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.224945 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.226351 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.226521 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.226556 sierra/sierra/library.c (2): Packet type 0x06 read. Returning GP_OK. >> 0.226586 sierra/sierra/library.c (2): Packet successfully read. >> 0.226613 sierra/sierra/library.c (2): Transmission successful. >> 0.226642 sierra/sierra/sierra.c (2): *** folder support: yes >> 0.226676 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >> 0.226709 sierra/sierra/sierra.c (2): Closing connection >> 0.226737 sierra/sierra/sierra.c (2): ****************** sierra initialization OK >> 0.228106 gp_camera_free (2): Freeing camera... >> 0.228155 gp_camera_exit (2): Exiting camera ('Olympus C-2040Z')... >> 0.228184 sierra/sierra/sierra.c (2): sierra camera_exit >> 0.228215 gp_port_close (2): Closing port... >> 0.228373 gp_filesystem_reset (2): resetting filesystem >> 0.228410 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >> 0.228439 gp_filesystem_lru_clear (2): fscache LRU list already empty >> 0.228469 delete_all_folders (2): Internally deleting all folders from '/'... >> 0.228502 lookup_folder (2): Lookup folder '/'... >> 0.228534 lookup_folder (2): Found! / is 0x5580db42c890 >> 0.228565 recurse_delete_folder (2): Recurse delete folder 0x5580db42c890// >> 0.228595 delete_all_files (2): Delete all files in folder 0x5580db42c890// >> 0.228623 gp_port_free (2): Freeing port... >> 0.228650 gp_port_close (2): Closing port... >> 0.228748 gp_filesystem_reset (2): resetting filesystem >> 0.228780 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >> 0.228808 gp_filesystem_lru_clear (2): fscache LRU list already empty >> 0.228836 delete_all_folders (2): Internally deleting all folders from '/'... >> 0.228864 lookup_folder (2): Lookup folder '/'... >> 0.228893 lookup_folder (2): Found! / is 0x5580db42c890 >> 0.228922 recurse_delete_folder (2): Recurse delete folder 0x5580db42c890// >> 0.228950 delete_all_files (2): Delete all files in folder 0x5580db42c890// >> 0.000017 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >> 0.000126 main (2): gphoto2 2.5.23 >> 0.000150 main (2): gphoto2 has been compiled with the following options: >> 0.000170 main (2): + gcc (C compiler used) >> 0.000188 main (2): + popt (mandatory, for handling command-line parameters) >> 0.000206 main (2): + exif (for displaying EXIF information) >> 0.000223 main (2): + cdk (for accessing configuration options) >> 0.000241 main (2): + aa (for displaying live previews) >> 0.000261 main (2): + jpeg (for displaying live previews in JPEG format) >> 0.000279 main (2): + readline (for easy navigation in the shell) >> 0.000313 main (2): libgphoto2 2.5.25 >> 0.000333 main (2): libgphoto2 has been compiled with the following options: >> 0.000356 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >> 0.000404 main (2): + gcc (C compiler used) >> 0.000423 main (2): + ltdl (for portable loading of camlibs) >> 0.000443 main (2): + EXIF (for special handling of EXIF files) >> 0.000470 main (2): libgphoto2_port 0.12.0 >> 0.000491 main (2): libgphoto2_port has been compiled with the following options: >> 0.000510 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >> 0.000527 main (2): + gcc (C compiler used) >> 0.000545 main (2): + ltdl (for portable loading of iolibs) >> 0.000563 main (2): + EXIF (for vusb) >> 0.000580 main (2): + USB (libusb1, for USB cameras) >> 0.000598 main (2): + serial (for serial cameras) >> 0.000615 main (2): + no resmgr (serial port access and locking) >> 0.000632 main (2): + no ttylock (serial port locking) >> 0.000650 main (2): + no lockdev (serial port locking) >> 0.000668 main (2): CAMLIBS env var not set, using compile-time default instead >> 0.000685 main (2): IOLIBS env var not set, using compile-time default instead >> 0.000702 main (2): invoked with following arguments: >> 0.000720 main (2): --debug >> 0.000738 main (2): --debug-logfile=my-logfile.txt >> 0.000755 main (2): --capture-tethered >> 0.000810 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >> 0.000939 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >> 0.001097 main (2): The user has not specified both a model and a port. Try to figure them out. >> 0.001122 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >> 0.001294 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.001743 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >> 0.001792 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >> 0.001833 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >> 0.002007 gp_port_library_list (2): found mtab fsname sysfs >> 0.002032 gp_port_library_list (2): found mtab fsname proc >> 0.002056 gp_port_library_list (2): found mtab fsname udev >> 0.002101 gp_port_library_list (2): found mtab fsname devpts >> 0.002126 gp_port_library_list (2): found mtab fsname tmpfs >> 0.002169 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >> 0.003397 gp_port_library_list (2): found mtab fsname /dev/loop0 >> 0.003468 gp_port_library_list (2): found mtab fsname securityfs >> 0.003513 gp_port_library_list (2): found mtab fsname tmpfs >> 0.003596 gp_port_library_list (2): found mtab fsname tmpfs >> 0.003677 gp_port_library_list (2): found mtab fsname tmpfs >> 0.003768 gp_port_library_list (2): found mtab fsname cgroup2 >> 0.003813 gp_port_library_list (2): found mtab fsname cgroup >> 0.003853 gp_port_library_list (2): found mtab fsname pstore >> 0.003973 gp_port_library_list (2): found mtab fsname efivarfs >> 0.004024 gp_port_library_list (2): found mtab fsname none >> 0.004073 gp_port_library_list (2): found mtab fsname cgroup >> 0.004101 gp_port_library_list (2): found mtab fsname cgroup >> 0.004127 gp_port_library_list (2): found mtab fsname cgroup >> 0.004154 gp_port_library_list (2): found mtab fsname cgroup >> 0.004180 gp_port_library_list (2): found mtab fsname cgroup >> 0.004208 gp_port_library_list (2): found mtab fsname cgroup >> 0.004234 gp_port_library_list (2): found mtab fsname cgroup >> 0.004260 gp_port_library_list (2): found mtab fsname cgroup >> 0.004286 gp_port_library_list (2): found mtab fsname cgroup >> 0.004341 gp_port_library_list (2): found mtab fsname cgroup >> 0.004369 gp_port_library_list (2): found mtab fsname cgroup >> 0.004463 gp_port_library_list (2): found mtab fsname systemd-1 >> 0.004491 gp_port_library_list (2): found mtab fsname hugetlbfs >> 0.004544 gp_port_library_list (2): found mtab fsname mqueue >> 0.004572 gp_port_library_list (2): found mtab fsname debugfs >> 0.004621 gp_port_library_list (2): found mtab fsname tracefs >> 0.004669 gp_port_library_list (2): found mtab fsname fusectl >> 0.004696 gp_port_library_list (2): found mtab fsname configfs >> 0.004758 gp_port_library_list (2): found mtab fsname /dev/loop1 >> 0.004799 gp_port_library_list (2): found mtab fsname /dev/loop2 >> 0.004838 gp_port_library_list (2): found mtab fsname /dev/loop3 >> 0.004876 gp_port_library_list (2): found mtab fsname /dev/loop4 >> 0.004915 gp_port_library_list (2): found mtab fsname /dev/loop5 >> 0.004953 gp_port_library_list (2): found mtab fsname /dev/loop6 >> 0.004992 gp_port_library_list (2): found mtab fsname /dev/loop8 >> 0.005031 gp_port_library_list (2): found mtab fsname /dev/loop7 >> 0.005125 gp_port_library_list (2): found mtab fsname /dev/loop10 >> 0.005165 gp_port_library_list (2): found mtab fsname /dev/loop9 >> 0.005204 gp_port_library_list (2): found mtab fsname /dev/loop11 >> 0.005243 gp_port_library_list (2): found mtab fsname /dev/loop12 >> 0.005282 gp_port_library_list (2): found mtab fsname /dev/loop13 >> 0.005321 gp_port_library_list (2): found mtab fsname /dev/loop14 >> 0.005360 gp_port_library_list (2): found mtab fsname /dev/loop15 >> 0.005430 gp_port_library_list (2): found mtab fsname /dev/loop16 >> 0.005474 gp_port_library_list (2): found mtab fsname /dev/loop17 >> 0.005516 gp_port_library_list (2): found mtab fsname /dev/loop18 >> 0.005556 gp_port_library_list (2): found mtab fsname /dev/loop19 >> 0.005596 gp_port_library_list (2): found mtab fsname /dev/loop20 >> 0.005638 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >> 0.005677 gp_port_library_list (2): found mtab fsname tmpfs >> 0.005729 gp_port_library_list (2): found mtab fsname gvfsd-fuse >> 0.005838 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.005862 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006176 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006201 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006222 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006241 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006261 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007181 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007223 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007244 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007265 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007286 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007306 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007350 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007372 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007392 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007412 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007432 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007452 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007472 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007492 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007512 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007531 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007552 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007572 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007591 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007611 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007631 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007651 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007671 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007691 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007711 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007730 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007750 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007770 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007789 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007809 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007829 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007848 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007868 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007904 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007924 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.022458 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.022534 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.022572 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,012') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.022592 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >> 0.023189 foreach_func (2): Loaded 'USB Mass Storage direct IO' ('usbdiskdirect:/dev/sda') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >> 0.023220 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >> 0.023712 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >> 0.023743 gp_port_info_list_count (2): Counting entries (44 available)... >> 0.023764 gp_port_info_list_count (2): 39 regular entries available. >> 0.023816 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >> 0.023960 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >> 0.023983 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >> 0.024002 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >> 0.024021 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >> 0.024040 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >> 0.024059 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >> 0.024077 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >> 0.024096 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >> 0.024114 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >> 0.024132 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >> 0.024150 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >> 0.024169 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >> 0.024187 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >> 0.024206 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >> 0.024225 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >> 0.024245 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >> 0.024264 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >> 0.024282 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >> 0.024304 gp_abilities_list_load_dir (2): Found 18 camera drivers. >> 0.072422 gp_port_info_list_count (2): Counting entries (44 available)... >> 0.072508 gp_port_info_list_count (2): 39 regular entries available. >> 0.072529 gp_port_new (2): Creating new device... >> 0.072554 gp_port_info_list_get_info (2): Getting info of entry 0 (44 available)... >> 0.072941 gp_port_set_settings (2): Setting settings... >> 0.072967 gp_port_info_list_get_info (2): Getting info of entry 1 (44 available)... >> 0.073210 gp_port_set_settings (2): Setting settings... >> 0.073234 gp_port_info_list_get_info (2): Getting info of entry 2 (44 available)... >> 0.073556 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.073612 gp_port_set_settings (2): Setting settings... >> 0.073634 gp_port_info_list_get_info (2): Getting info of entry 3 (44 available)... >> 0.073899 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.073921 gp_port_set_settings (2): Setting settings... >> 0.073942 gp_port_info_list_get_info (2): Getting info of entry 4 (44 available)... >> 0.074191 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.074212 gp_port_set_settings (2): Setting settings... >> 0.074232 gp_port_info_list_get_info (2): Getting info of entry 5 (44 available)... >> 0.074477 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.074498 gp_port_set_settings (2): Setting settings... >> 0.074518 gp_port_info_list_get_info (2): Getting info of entry 6 (44 available)... >> 0.074763 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.074784 gp_port_set_settings (2): Setting settings... >> 0.074804 gp_port_info_list_get_info (2): Getting info of entry 7 (44 available)... >> 0.075048 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.075069 gp_port_set_settings (2): Setting settings... >> 0.075089 gp_port_info_list_get_info (2): Getting info of entry 8 (44 available)... >> 0.075333 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.075353 gp_port_set_settings (2): Setting settings... >> 0.075373 gp_port_info_list_get_info (2): Getting info of entry 9 (44 available)... >> 0.075617 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.075638 gp_port_set_settings (2): Setting settings... >> 0.075658 gp_port_info_list_get_info (2): Getting info of entry 10 (44 available)... >> 0.075902 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.075923 gp_port_set_settings (2): Setting settings... >> 0.075943 gp_port_info_list_get_info (2): Getting info of entry 11 (44 available)... >> 0.076186 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076207 gp_port_set_settings (2): Setting settings... >> 0.076227 gp_port_info_list_get_info (2): Getting info of entry 12 (44 available)... >> 0.076472 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076493 gp_port_set_settings (2): Setting settings... >> 0.076512 gp_port_info_list_get_info (2): Getting info of entry 13 (44 available)... >> 0.076757 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076778 gp_port_set_settings (2): Setting settings... >> 0.076798 gp_port_info_list_get_info (2): Getting info of entry 14 (44 available)... >> 0.077041 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077062 gp_port_set_settings (2): Setting settings... >> 0.077082 gp_port_info_list_get_info (2): Getting info of entry 15 (44 available)... >> 0.077326 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077347 gp_port_set_settings (2): Setting settings... >> 0.077367 gp_port_info_list_get_info (2): Getting info of entry 16 (44 available)... >> 0.077649 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077674 gp_port_set_settings (2): Setting settings... >> 0.077695 gp_port_info_list_get_info (2): Getting info of entry 17 (44 available)... >> 0.077945 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077966 gp_port_set_settings (2): Setting settings... >> 0.077987 gp_port_info_list_get_info (2): Getting info of entry 18 (44 available)... >> 0.078233 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078253 gp_port_set_settings (2): Setting settings... >> 0.078274 gp_port_info_list_get_info (2): Getting info of entry 19 (44 available)... >> 0.078520 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078540 gp_port_set_settings (2): Setting settings... >> 0.078561 gp_port_info_list_get_info (2): Getting info of entry 20 (44 available)... >> 0.078827 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078848 gp_port_set_settings (2): Setting settings... >> 0.078868 gp_port_info_list_get_info (2): Getting info of entry 21 (44 available)... >> 0.079113 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079134 gp_port_set_settings (2): Setting settings... >> 0.079154 gp_port_info_list_get_info (2): Getting info of entry 22 (44 available)... >> 0.079401 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079422 gp_port_set_settings (2): Setting settings... >> 0.079442 gp_port_info_list_get_info (2): Getting info of entry 23 (44 available)... >> 0.079689 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079709 gp_port_set_settings (2): Setting settings... >> 0.079729 gp_port_info_list_get_info (2): Getting info of entry 24 (44 available)... >> 0.079975 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079996 gp_port_set_settings (2): Setting settings... >> 0.080017 gp_port_info_list_get_info (2): Getting info of entry 25 (44 available)... >> 0.080264 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080284 gp_port_set_settings (2): Setting settings... >> 0.080304 gp_port_info_list_get_info (2): Getting info of entry 26 (44 available)... >> 0.080549 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080569 gp_port_set_settings (2): Setting settings... >> 0.080589 gp_port_info_list_get_info (2): Getting info of entry 27 (44 available)... >> 0.080837 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080858 gp_port_set_settings (2): Setting settings... >> 0.080878 gp_port_info_list_get_info (2): Getting info of entry 28 (44 available)... >> 0.081135 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081161 gp_port_set_settings (2): Setting settings... >> 0.081181 gp_port_info_list_get_info (2): Getting info of entry 29 (44 available)... >> 0.081513 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081551 gp_port_set_settings (2): Setting settings... >> 0.081572 gp_port_info_list_get_info (2): Getting info of entry 30 (44 available)... >> 0.081861 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081886 gp_port_set_settings (2): Setting settings... >> 0.081907 gp_port_info_list_get_info (2): Getting info of entry 31 (44 available)... >> 0.082214 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082250 gp_port_set_settings (2): Setting settings... >> 0.082271 gp_port_info_list_get_info (2): Getting info of entry 32 (44 available)... >> 0.082559 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082581 gp_port_set_settings (2): Setting settings... >> 0.082602 gp_port_info_list_get_info (2): Getting info of entry 33 (44 available)... >> 0.082852 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082873 gp_port_set_settings (2): Setting settings... >> 0.082893 gp_port_info_list_get_info (2): Getting info of entry 34 (44 available)... >> 0.083153 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083176 gp_port_set_settings (2): Setting settings... >> 0.083199 gp_port_info_list_get_info (2): Getting info of entry 35 (44 available)... >> 0.096451 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.096500 gp_port_set_settings (2): Setting settings... >> 0.096540 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >> 0.096560 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.096581 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.097764 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.098660 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.098819 gp_port_info_list_get_info (2): Getting info of entry 36 (44 available)... >> 0.116575 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.116640 gp_port_set_settings (2): Setting settings... >> 0.116685 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,012, (new int=0, conf=-1, alt=-1) port usb:001,012 >> 0.116705 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.116726 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.117871 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.118781 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.118891 gp_port_info_list_get_info (2): Getting info of entry 37 (44 available)... >> 0.120330 gp_port_set_settings (2): Setting settings... >> 0.120373 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.120643 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >> 0.120986 gp_port_set_settings (2): Setting settings... >> 0.121012 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.122346 gp_abilities_list_detect_usb(2): Found 'Olympus C-2040Z' (0x7b4,0x105) >> 0.122385 gp_port_free (2): Freeing port... >> 0.122405 gp_port_close (2): Closing port... >> 0.122752 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >> 0.122777 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >> 0.122800 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >> 0.123083 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (44 entries available)... >> 0.123110 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >> 0.123132 gp_camera_set_port_info (2): Setting port info for port 'USB Mass Storage raw SCSI' at 'usbscsi:/dev/sg0'... >> 0.123510 gp_port_set_settings (2): Setting settings... >> 0.123545 gp_setting_set (2): Setting key 'port' to value 'usbscsi:/dev/sg0' (gphoto2) >> 0.123568 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >> 0.123876 gp_camera_init (2): Initializing camera... >> 0.123902 gp_camera_init (2): Loading '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'... >> 0.124324 gp_port_open (2): Opening port... >> 0.124425 gp_port_usbscsi_lock (2): Trying to lock '/dev/sg0'... >> 0.124470 gp_port_set_settings (2): Setting settings... >> 0.124492 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >> 0.124511 sierra/sierra/library.c (2): Sending initialization sequence to the camera >> 0.124550 sierra/sierra/sierra.c (2): Establishing connection >> 0.124569 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.124589 sierra/sierra/library.c (2): sierra_get_int_register: register 0x01... >> 0.124607 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.124624 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.124647 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.124678 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.124697 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.126670 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.126725 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.126751 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >> 0.126776 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >> >> 0.126806 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 02 00 01 01 02 00- .C...... >> >> 0.126856 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.129862 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.129948 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.129995 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.130033 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.131737 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.131828 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.131865 sierra/sierra/library.c (2): Reading packet... >> 0.131900 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.131932 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.131970 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.132009 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.132037 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.195814 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.195965 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.196063 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.196140 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.199200 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.199344 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >> >> 0.199410 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.199486 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >> >> 0.199554 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.202843 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.203065 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 03 00 04 00 0d 00 00 00-0d 00 .......... >> >> 0.203152 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.203245 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.203322 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.205314 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.205497 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.205592 sierra/sierra/library.c (2): Packet successfully read. >> 0.205677 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >> 0.205754 sierra/sierra/library.c (2): Value of register 0x01: 0x0d. >> 0.205820 sierra/sierra/library.c (2): Writing acknowledgement... >> 0.205891 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.205955 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.206037 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.206165 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.206310 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.208953 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.209087 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.209175 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >> 0.209263 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.209369 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 06 - . >> >> 0.209536 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.212854 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.212991 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.213092 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.213173 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.215383 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.215552 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.215675 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >> 0.215740 sierra/sierra/library.c (2): Read value of register 0x01 and wrote acknowledgement. Returning. >> 0.215794 gp_port_set_timeout (2): Setting port timeout to 50 milliseconds. >> 0.215849 sierra/sierra/library.c (2): sierra_set_string_register: reg 84, value '\' >> 0.215902 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.215952 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.216014 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.216075 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.216129 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.229379 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.229589 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.229675 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >> 0.229858 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >> >> 0.229938 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 03 00 03 54 5c b3-00 .C...T\.. >> >> 0.229998 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.232102 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.232233 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.232326 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.232402 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.234446 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.234595 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.234673 sierra/sierra/library.c (2): Reading packet... >> 0.234749 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.234817 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.234978 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.235065 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.235142 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.236966 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.237100 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.237201 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.237282 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.239649 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.239811 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >> >> 0.239889 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.239962 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.240024 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.242825 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.243008 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 06 - . >> >> 0.243090 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.243163 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.243221 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.246382 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.246554 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.246633 sierra/sierra/library.c (2): Packet type 0x06 read. Returning GP_OK. >> 0.246688 sierra/sierra/library.c (2): Packet successfully read. >> 0.246740 sierra/sierra/library.c (2): Transmission successful. >> 0.246793 sierra/sierra/sierra.c (2): *** folder support: yes >> 0.246851 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >> 0.246903 sierra/sierra/sierra.c (2): Closing connection >> 0.246957 sierra/sierra/sierra.c (2): ****************** sierra initialization OK >> 0.249364 gp_camera_free (2): Freeing camera... >> 0.249516 gp_camera_exit (2): Exiting camera ('Olympus C-2040Z')... >> 0.249576 sierra/sierra/sierra.c (2): sierra camera_exit >> 0.249634 gp_port_close (2): Closing port... >> 0.250039 gp_filesystem_reset (2): resetting filesystem >> 0.250085 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >> 0.250122 gp_filesystem_lru_clear (2): fscache LRU list already empty >> 0.250162 delete_all_folders (2): Internally deleting all folders from '/'... >> 0.250203 lookup_folder (2): Lookup folder '/'... >> 0.250248 lookup_folder (2): Found! / is 0x563d98881890 >> 0.250287 recurse_delete_folder (2): Recurse delete folder 0x563d98881890// >> 0.250329 delete_all_files (2): Delete all files in folder 0x563d98881890// >> 0.250366 gp_port_free (2): Freeing port... >> 0.250403 gp_port_close (2): Closing port... >> 0.250527 gp_filesystem_reset (2): resetting filesystem >> 0.250569 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >> 0.250607 gp_filesystem_lru_clear (2): fscache LRU list already empty >> 0.250645 delete_all_folders (2): Internally deleting all folders from '/'... >> 0.250682 lookup_folder (2): Lookup folder '/'... >> 0.250769 lookup_folder (2): Found! / is 0x563d98881890 >> 0.250810 recurse_delete_folder (2): Recurse delete folder 0x563d98881890// >> 0.250849 delete_all_files (2): Delete all files in folder 0x563d98881890// >> 0.000010 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >> 0.026453 main (2): gphoto2 2.5.23 >> 0.026524 main (2): gphoto2 has been compiled with the following options: >> 0.026565 main (2): + gcc (C compiler used) >> 0.026599 main (2): + popt (mandatory, for handling command-line parameters) >> 0.026633 main (2): + exif (for displaying EXIF information) >> 0.026665 main (2): + cdk (for accessing configuration options) >> 0.026697 main (2): + aa (for displaying live previews) >> 0.026730 main (2): + jpeg (for displaying live previews in JPEG format) >> 0.026766 main (2): + readline (for easy navigation in the shell) >> 0.026806 main (2): libgphoto2 2.5.25 >> 0.026845 main (2): libgphoto2 has been compiled with the following options: >> 0.026884 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >> 0.026918 main (2): + gcc (C compiler used) >> 0.026950 main (2): + ltdl (for portable loading of camlibs) >> 0.026983 main (2): + EXIF (for special handling of EXIF files) >> 0.027041 main (2): libgphoto2_port 0.12.0 >> 0.027078 main (2): libgphoto2_port has been compiled with the following options: >> 0.027116 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >> 0.027149 main (2): + gcc (C compiler used) >> 0.027181 main (2): + ltdl (for portable loading of iolibs) >> 0.027212 main (2): + EXIF (for vusb) >> 0.027244 main (2): + USB (libusb1, for USB cameras) >> 0.027274 main (2): + serial (for serial cameras) >> 0.027312 main (2): + no resmgr (serial port access and locking) >> 0.027344 main (2): + no ttylock (serial port locking) >> 0.027375 main (2): + no lockdev (serial port locking) >> 0.027410 main (2): CAMLIBS env var not set, using compile-time default instead >> 0.027444 main (2): IOLIBS env var not set, using compile-time default instead >> 0.027477 main (2): invoked with following arguments: >> 0.027510 main (2): --debug >> 0.027546 main (2): --debug-logfile=my-logfile.txt >> 0.027579 main (2): --capture-image >> 0.027687 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >> 0.027916 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >> 0.028079 main (2): The user has not specified both a model and a port. Try to figure them out. >> 0.028127 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >> 0.028438 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.029214 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >> 0.029313 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >> 0.029388 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >> 0.029677 gp_port_library_list (2): found mtab fsname sysfs >> 0.029730 gp_port_library_list (2): found mtab fsname proc >> 0.029776 gp_port_library_list (2): found mtab fsname udev >> 0.029941 gp_port_library_list (2): found mtab fsname devpts >> 0.030022 gp_port_library_list (2): found mtab fsname tmpfs >> 0.030103 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >> 0.031100 gp_port_library_list (2): found mtab fsname /dev/loop0 >> 0.031181 gp_port_library_list (2): found mtab fsname securityfs >> 0.031230 gp_port_library_list (2): found mtab fsname tmpfs >> 0.031316 gp_port_library_list (2): found mtab fsname tmpfs >> 0.031397 gp_port_library_list (2): found mtab fsname tmpfs >> 0.031492 gp_port_library_list (2): found mtab fsname cgroup2 >> 0.031539 gp_port_library_list (2): found mtab fsname cgroup >> 0.031582 gp_port_library_list (2): found mtab fsname pstore >> 0.031772 gp_port_library_list (2): found mtab fsname efivarfs >> 0.031858 gp_port_library_list (2): found mtab fsname none >> 0.031935 gp_port_library_list (2): found mtab fsname cgroup >> 0.031980 gp_port_library_list (2): found mtab fsname cgroup >> 0.032023 gp_port_library_list (2): found mtab fsname cgroup >> 0.032067 gp_port_library_list (2): found mtab fsname cgroup >> 0.032109 gp_port_library_list (2): found mtab fsname cgroup >> 0.032152 gp_port_library_list (2): found mtab fsname cgroup >> 0.032195 gp_port_library_list (2): found mtab fsname cgroup >> 0.032237 gp_port_library_list (2): found mtab fsname cgroup >> 0.032279 gp_port_library_list (2): found mtab fsname cgroup >> 0.032321 gp_port_library_list (2): found mtab fsname cgroup >> 0.032364 gp_port_library_list (2): found mtab fsname cgroup >> 0.032518 gp_port_library_list (2): found mtab fsname systemd-1 >> 0.032567 gp_port_library_list (2): found mtab fsname hugetlbfs >> 0.032659 gp_port_library_list (2): found mtab fsname mqueue >> 0.032770 gp_port_library_list (2): found mtab fsname debugfs >> 0.032855 gp_port_library_list (2): found mtab fsname tracefs >> 0.032932 gp_port_library_list (2): found mtab fsname fusectl >> 0.033004 gp_port_library_list (2): found mtab fsname configfs >> 0.033093 gp_port_library_list (2): found mtab fsname /dev/loop1 >> 0.033163 gp_port_library_list (2): found mtab fsname /dev/loop2 >> 0.033232 gp_port_library_list (2): found mtab fsname /dev/loop3 >> 0.033301 gp_port_library_list (2): found mtab fsname /dev/loop4 >> 0.033375 gp_port_library_list (2): found mtab fsname /dev/loop5 >> 0.033444 gp_port_library_list (2): found mtab fsname /dev/loop8 >> 0.033513 gp_port_library_list (2): found mtab fsname /dev/loop6 >> 0.033581 gp_port_library_list (2): found mtab fsname /dev/loop7 >> 0.033742 gp_port_library_list (2): found mtab fsname /dev/loop9 >> 0.033817 gp_port_library_list (2): found mtab fsname /dev/loop10 >> 0.033886 gp_port_library_list (2): found mtab fsname /dev/loop11 >> 0.033986 gp_port_library_list (2): found mtab fsname /dev/loop12 >> 0.034057 gp_port_library_list (2): found mtab fsname /dev/loop13 >> 0.034126 gp_port_library_list (2): found mtab fsname /dev/loop14 >> 0.034198 gp_port_library_list (2): found mtab fsname /dev/loop15 >> 0.034268 gp_port_library_list (2): found mtab fsname /dev/loop16 >> 0.034339 gp_port_library_list (2): found mtab fsname /dev/loop17 >> 0.034409 gp_port_library_list (2): found mtab fsname /dev/loop18 >> 0.034481 gp_port_library_list (2): found mtab fsname /dev/loop19 >> 0.034551 gp_port_library_list (2): found mtab fsname /dev/loop20 >> 0.034625 gp_port_library_list (2): found mtab fsname /dev/loop21 >> 0.034700 gp_port_library_list (2): found mtab fsname /dev/loop22 >> 0.034839 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >> 0.034913 gp_port_library_list (2): found mtab fsname tmpfs >> 0.035814 gp_port_library_list (2): found mtab fsname gvfsd-fuse >> 0.035867 gp_port_library_list (2): found mtab fsname tmpfs >> 0.035948 gp_port_library_list (2): found mtab fsname nsfs >> 0.036164 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.036250 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.036976 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.037042 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.037093 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.037139 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.037174 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.038627 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.038693 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.038741 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.038788 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.038837 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.038882 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.038929 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.038974 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039020 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039065 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039111 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039156 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039201 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039247 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039292 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039338 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039384 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039429 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039475 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039520 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039565 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039611 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039703 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039753 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039799 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039845 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039890 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039936 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.039983 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.040029 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.040074 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.040120 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.040165 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.040210 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.040255 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.055277 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.055370 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.055420 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.055467 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >> 0.055994 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >> 0.056381 gp_port_info_list_count (2): Counting entries (42 available)... >> 0.056406 gp_port_info_list_count (2): 37 regular entries available. >> 0.056465 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >> 0.056594 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >> 0.056617 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >> 0.056637 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >> 0.056656 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >> 0.056675 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >> 0.056694 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >> 0.056765 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >> 0.056790 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >> 0.056810 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >> 0.056828 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >> 0.056847 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >> 0.056866 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >> 0.056909 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >> 0.056930 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >> 0.056950 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >> 0.056970 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >> 0.056990 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >> 0.057009 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >> 0.057032 gp_abilities_list_load_dir (2): Found 18 camera drivers. >> 0.104414 gp_port_info_list_count (2): Counting entries (42 available)... >> 0.104504 gp_port_info_list_count (2): 37 regular entries available. >> 0.104525 gp_port_new (2): Creating new device... >> 0.104551 gp_port_info_list_get_info (2): Getting info of entry 0 (42 available)... >> 0.105304 gp_port_set_settings (2): Setting settings... >> 0.105343 gp_port_info_list_get_info (2): Getting info of entry 1 (42 available)... >> 0.105591 gp_port_set_settings (2): Setting settings... >> 0.105614 gp_port_info_list_get_info (2): Getting info of entry 2 (42 available)... >> 0.105883 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.105904 gp_port_set_settings (2): Setting settings... >> 0.105925 gp_port_info_list_get_info (2): Getting info of entry 3 (42 available)... >> 0.106172 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.106193 gp_port_set_settings (2): Setting settings... >> 0.106214 gp_port_info_list_get_info (2): Getting info of entry 4 (42 available)... >> 0.106459 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.106480 gp_port_set_settings (2): Setting settings... >> 0.106500 gp_port_info_list_get_info (2): Getting info of entry 5 (42 available)... >> 0.106797 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.106819 gp_port_set_settings (2): Setting settings... >> 0.106843 gp_port_info_list_get_info (2): Getting info of entry 6 (42 available)... >> 0.107096 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.107117 gp_port_set_settings (2): Setting settings... >> 0.107137 gp_port_info_list_get_info (2): Getting info of entry 7 (42 available)... >> 0.107383 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.107404 gp_port_set_settings (2): Setting settings... >> 0.107424 gp_port_info_list_get_info (2): Getting info of entry 8 (42 available)... >> 0.107669 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.107690 gp_port_set_settings (2): Setting settings... >> 0.107710 gp_port_info_list_get_info (2): Getting info of entry 9 (42 available)... >> 0.107954 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.107975 gp_port_set_settings (2): Setting settings... >> 0.107995 gp_port_info_list_get_info (2): Getting info of entry 10 (42 available)... >> 0.108239 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.108260 gp_port_set_settings (2): Setting settings... >> 0.108280 gp_port_info_list_get_info (2): Getting info of entry 11 (42 available)... >> 0.108525 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.108545 gp_port_set_settings (2): Setting settings... >> 0.108566 gp_port_info_list_get_info (2): Getting info of entry 12 (42 available)... >> 0.108838 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.108863 gp_port_set_settings (2): Setting settings... >> 0.108883 gp_port_info_list_get_info (2): Getting info of entry 13 (42 available)... >> 0.109132 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.109153 gp_port_set_settings (2): Setting settings... >> 0.109173 gp_port_info_list_get_info (2): Getting info of entry 14 (42 available)... >> 0.109446 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.109468 gp_port_set_settings (2): Setting settings... >> 0.109488 gp_port_info_list_get_info (2): Getting info of entry 15 (42 available)... >> 0.109733 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.109754 gp_port_set_settings (2): Setting settings... >> 0.109774 gp_port_info_list_get_info (2): Getting info of entry 16 (42 available)... >> 0.110021 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.110041 gp_port_set_settings (2): Setting settings... >> 0.110062 gp_port_info_list_get_info (2): Getting info of entry 17 (42 available)... >> 0.110307 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.110328 gp_port_set_settings (2): Setting settings... >> 0.110348 gp_port_info_list_get_info (2): Getting info of entry 18 (42 available)... >> 0.110594 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.110615 gp_port_set_settings (2): Setting settings... >> 0.110635 gp_port_info_list_get_info (2): Getting info of entry 19 (42 available)... >> 0.110880 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.110901 gp_port_set_settings (2): Setting settings... >> 0.110921 gp_port_info_list_get_info (2): Getting info of entry 20 (42 available)... >> 0.111165 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.111186 gp_port_set_settings (2): Setting settings... >> 0.111206 gp_port_info_list_get_info (2): Getting info of entry 21 (42 available)... >> 0.111450 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.111471 gp_port_set_settings (2): Setting settings... >> 0.111492 gp_port_info_list_get_info (2): Getting info of entry 22 (42 available)... >> 0.111736 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.111757 gp_port_set_settings (2): Setting settings... >> 0.111777 gp_port_info_list_get_info (2): Getting info of entry 23 (42 available)... >> 0.112022 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.112042 gp_port_set_settings (2): Setting settings... >> 0.112062 gp_port_info_list_get_info (2): Getting info of entry 24 (42 available)... >> 0.112307 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.112327 gp_port_set_settings (2): Setting settings... >> 0.112347 gp_port_info_list_get_info (2): Getting info of entry 25 (42 available)... >> 0.112592 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.112612 gp_port_set_settings (2): Setting settings... >> 0.112633 gp_port_info_list_get_info (2): Getting info of entry 26 (42 available)... >> 0.112902 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.112926 gp_port_set_settings (2): Setting settings... >> 0.112946 gp_port_info_list_get_info (2): Getting info of entry 27 (42 available)... >> 0.113192 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.113213 gp_port_set_settings (2): Setting settings... >> 0.113234 gp_port_info_list_get_info (2): Getting info of entry 28 (42 available)... >> 0.113513 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.113534 gp_port_set_settings (2): Setting settings... >> 0.113555 gp_port_info_list_get_info (2): Getting info of entry 29 (42 available)... >> 0.113801 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.113822 gp_port_set_settings (2): Setting settings... >> 0.113842 gp_port_info_list_get_info (2): Getting info of entry 30 (42 available)... >> 0.114089 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.114110 gp_port_set_settings (2): Setting settings... >> 0.114131 gp_port_info_list_get_info (2): Getting info of entry 31 (42 available)... >> 0.114380 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.114401 gp_port_set_settings (2): Setting settings... >> 0.114443 gp_port_info_list_get_info (2): Getting info of entry 32 (42 available)... >> 0.114691 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.114712 gp_port_set_settings (2): Setting settings... >> 0.114732 gp_port_info_list_get_info (2): Getting info of entry 33 (42 available)... >> 0.114977 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.114998 gp_port_set_settings (2): Setting settings... >> 0.115018 gp_port_info_list_get_info (2): Getting info of entry 34 (42 available)... >> 0.115263 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.115284 gp_port_set_settings (2): Setting settings... >> 0.115304 gp_port_info_list_get_info (2): Getting info of entry 35 (42 available)... >> 0.128159 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.128222 gp_port_set_settings (2): Setting settings... >> 0.128264 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >> 0.128284 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.128305 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.129447 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.130339 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.130462 gp_port_info_list_get_info (2): Getting info of entry 36 (42 available)... >> 0.145061 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.145114 gp_port_set_settings (2): Setting settings... >> 0.145156 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:, (new int=0, conf=-1, alt=-1) port usb: >> 0.145176 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.145196 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.145611 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.145661 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.145681 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.145701 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.145721 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.145740 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.145759 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.146058 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.146112 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.146148 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.146174 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.146199 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.146222 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.146246 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.146287 gp_port_free (2): Freeing port... >> 0.146308 gp_port_close (2): Closing port... >> 0.147626 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >> 0.147674 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >> 0.147704 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >> 0.148091 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (42 entries available)... >> 0.148116 gp_port_info_list_lookup_path(2): Starting regex search for 'usbscsi:/dev/sg0'... >> 0.148135 gp_port_info_list_lookup_path(2): Trying '^disk:'... >> 0.148219 gp_port_info_list_lookup_path(2): re_match failed (-1) >> 0.148239 gp_port_info_list_lookup_path(2): Trying '^ptpip:'... >> 0.148278 gp_port_info_list_lookup_path(2): re_match failed (-1) >> 0.148299 gp_port_info_list_lookup_path(2): Trying '^ip:'... >> 0.148335 gp_port_info_list_lookup_path(2): re_match failed (-1) >> 0.148355 gp_port_info_list_lookup_path(2): Trying '^serial:'... >> 0.148394 gp_port_info_list_lookup_path(2): re_match failed (-1) >> 0.148415 gp_port_info_list_lookup_path(2): Trying '^usb:'... >> 0.148457 gp_port_info_list_lookup_path(2): re_match failed (-1) >> 0.148511 gp_port_info_list_get_info (2): Getting info of entry -5 (42 available)... >> 0.148532 gp_port_info_list_get_info [gphoto2-port-info-list.c:468](0): Invalid parameters: 'n >= 0 && n < list->count' is NULL/FALSE. >> 0.148550 gp_camera_init (2): Initializing camera... >> 0.148572 gp_context_error (0): You have to set the port prior to initialization of the camera. >> 0.149731 gp_camera_free (2): Freeing camera... >> 0.149778 gp_port_free (2): Freeing port... >> 0.149802 gp_filesystem_reset (2): resetting filesystem >> 0.149823 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >> 0.149843 gp_filesystem_lru_clear (2): fscache LRU list already empty >> 0.149864 delete_all_folders (2): Internally deleting all folders from '/'... >> 0.149885 lookup_folder (2): Lookup folder '/'... >> 0.149907 lookup_folder (2): Found! / is 0x55bc9b731890 >> 0.149929 recurse_delete_folder (2): Recurse delete folder 0x55bc9b731890// >> 0.149950 delete_all_files (2): Delete all files in folder 0x55bc9b731890// >> 0.000019 main (2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: >> 0.000154 main (2): gphoto2 2.5.23 >> 0.000183 main (2): gphoto2 has been compiled with the following options: >> 0.000205 main (2): + gcc (C compiler used) >> 0.000225 main (2): + popt (mandatory, for handling command-line parameters) >> 0.000245 main (2): + exif (for displaying EXIF information) >> 0.000264 main (2): + cdk (for accessing configuration options) >> 0.000283 main (2): + aa (for displaying live previews) >> 0.000301 main (2): + jpeg (for displaying live previews in JPEG format) >> 0.000320 main (2): + readline (for easy navigation in the shell) >> 0.000356 main (2): libgphoto2 2.5.25 >> 0.000378 main (2): libgphoto2 has been compiled with the following options: >> 0.000401 main (2): + standard camlib set SKIPPING SOME (ax203 canon digigr8 dimagev directory jl2005a jl2005c kodak_dc240 mars pentax ptp2 ricoh_g3 sierra sonix sq905 st2205 topfield tp6801 SKIPPING lumix) >> 0.000421 main (2): + gcc (C compiler used) >> 0.000440 main (2): + ltdl (for portable loading of camlibs) >> 0.000459 main (2): + EXIF (for special handling of EXIF files) >> 0.000490 main (2): libgphoto2_port 0.12.0 >> 0.000512 main (2): libgphoto2_port has been compiled with the following options: >> 0.000532 main (2): + iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi >> 0.000553 main (2): + gcc (C compiler used) >> 0.000572 main (2): + ltdl (for portable loading of iolibs) >> 0.000591 main (2): + EXIF (for vusb) >> 0.000611 main (2): + USB (libusb1, for USB cameras) >> 0.000631 main (2): + serial (for serial cameras) >> 0.000695 main (2): + no resmgr (serial port access and locking) >> 0.000715 main (2): + no ttylock (serial port locking) >> 0.000734 main (2): + no lockdev (serial port locking) >> 0.000754 main (2): CAMLIBS env var not set, using compile-time default instead >> 0.000772 main (2): IOLIBS env var not set, using compile-time default instead >> 0.000791 main (2): invoked with following arguments: >> 0.000810 main (2): --debug >> 0.000827 main (2): --debug-logfile=my-logfile.txt >> 0.000845 main (2): --capture-image >> 0.000904 load_settings (2): Creating gphoto config directory ('/home/blaas/.gphoto') >> 0.001055 load_settings (2): Loading settings from file '/home/blaas/.gphoto/settings'. >> 0.001152 main (2): The user has not specified both a model and a port. Try to figure them out. >> 0.001204 gp_port_info_list_load (2): Using ltdl to load io-drivers from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0'... >> 0.001381 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.001793 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/root.disk >> 0.001837 gp_port_library_list (2): found fstab fsname UUID=5601-57CF >> 0.001878 gp_port_library_list (2): found fstab fsname /host/ubuntu2/disks/swap.disk >> 0.002059 gp_port_library_list (2): found mtab fsname sysfs >> 0.002085 gp_port_library_list (2): found mtab fsname proc >> 0.002109 gp_port_library_list (2): found mtab fsname udev >> 0.002155 gp_port_library_list (2): found mtab fsname devpts >> 0.002180 gp_port_library_list (2): found mtab fsname tmpfs >> 0.002225 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p3 >> 0.002765 gp_port_library_list (2): found mtab fsname /dev/loop0 >> 0.002813 gp_port_library_list (2): found mtab fsname securityfs >> 0.002839 gp_port_library_list (2): found mtab fsname tmpfs >> 0.002886 gp_port_library_list (2): found mtab fsname tmpfs >> 0.002933 gp_port_library_list (2): found mtab fsname tmpfs >> 0.002987 gp_port_library_list (2): found mtab fsname cgroup2 >> 0.003012 gp_port_library_list (2): found mtab fsname cgroup >> 0.003036 gp_port_library_list (2): found mtab fsname pstore >> 0.003151 gp_port_library_list (2): found mtab fsname efivarfs >> 0.003198 gp_port_library_list (2): found mtab fsname none >> 0.003240 gp_port_library_list (2): found mtab fsname cgroup >> 0.003574 gp_port_library_list (2): found mtab fsname cgroup >> 0.003599 gp_port_library_list (2): found mtab fsname cgroup >> 0.003623 gp_port_library_list (2): found mtab fsname cgroup >> 0.003646 gp_port_library_list (2): found mtab fsname cgroup >> 0.003670 gp_port_library_list (2): found mtab fsname cgroup >> 0.003694 gp_port_library_list (2): found mtab fsname cgroup >> 0.003717 gp_port_library_list (2): found mtab fsname cgroup >> 0.003741 gp_port_library_list (2): found mtab fsname cgroup >> 0.003764 gp_port_library_list (2): found mtab fsname cgroup >> 0.003789 gp_port_library_list (2): found mtab fsname cgroup >> 0.003895 gp_port_library_list (2): found mtab fsname systemd-1 >> 0.003920 gp_port_library_list (2): found mtab fsname hugetlbfs >> 0.003966 gp_port_library_list (2): found mtab fsname mqueue >> 0.003990 gp_port_library_list (2): found mtab fsname debugfs >> 0.004034 gp_port_library_list (2): found mtab fsname tracefs >> 0.004078 gp_port_library_list (2): found mtab fsname fusectl >> 0.004102 gp_port_library_list (2): found mtab fsname configfs >> 0.004151 gp_port_library_list (2): found mtab fsname /dev/loop1 >> 0.004206 gp_port_library_list (2): found mtab fsname /dev/loop2 >> 0.004258 gp_port_library_list (2): found mtab fsname /dev/loop3 >> 0.004309 gp_port_library_list (2): found mtab fsname /dev/loop4 >> 0.004390 gp_port_library_list (2): found mtab fsname /dev/loop5 >> 0.004440 gp_port_library_list (2): found mtab fsname /dev/loop8 >> 0.004490 gp_port_library_list (2): found mtab fsname /dev/loop6 >> 0.004540 gp_port_library_list (2): found mtab fsname /dev/loop7 >> 0.004637 gp_port_library_list (2): found mtab fsname /dev/loop9 >> 0.004687 gp_port_library_list (2): found mtab fsname /dev/loop10 >> 0.004736 gp_port_library_list (2): found mtab fsname /dev/loop11 >> 0.004787 gp_port_library_list (2): found mtab fsname /dev/loop12 >> 0.004841 gp_port_library_list (2): found mtab fsname /dev/loop13 >> 0.004891 gp_port_library_list (2): found mtab fsname /dev/loop14 >> 0.004942 gp_port_library_list (2): found mtab fsname /dev/loop15 >> 0.004992 gp_port_library_list (2): found mtab fsname /dev/loop16 >> 0.005043 gp_port_library_list (2): found mtab fsname /dev/loop17 >> 0.005082 gp_port_library_list (2): found mtab fsname /dev/loop18 >> 0.005121 gp_port_library_list (2): found mtab fsname /dev/loop19 >> 0.005208 gp_port_library_list (2): found mtab fsname /dev/loop20 >> 0.005263 gp_port_library_list (2): found mtab fsname /dev/loop21 >> 0.005303 gp_port_library_list (2): found mtab fsname /dev/loop22 >> 0.005380 gp_port_library_list (2): found mtab fsname /dev/mmcblk0p1 >> 0.005420 gp_port_library_list (2): found mtab fsname tmpfs >> 0.005466 gp_port_library_list (2): found mtab fsname gvfsd-fuse >> 0.005491 gp_port_library_list (2): found mtab fsname tmpfs >> 0.005538 gp_port_library_list (2): found mtab fsname nsfs >> 0.005679 foreach_func (2): Loaded '' ('^disk:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/disk'. >> 0.005702 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006022 foreach_func (2): Loaded 'PTP/IP Connection' ('ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006048 foreach_func (2): Loaded '' ('^ptpip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006069 foreach_func (2): Loaded 'IP Connection' ('ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006089 foreach_func (2): Loaded '' ('^ip:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/ptpip'. >> 0.006108 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006731 foreach_func (2): Loaded 'Serial Port 0' ('serial:/dev/ttyS0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006757 foreach_func (2): Loaded 'Serial Port 1' ('serial:/dev/ttyS1') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006777 foreach_func (2): Loaded 'Serial Port 2' ('serial:/dev/ttyS2') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006798 foreach_func (2): Loaded 'Serial Port 3' ('serial:/dev/ttyS3') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006818 foreach_func (2): Loaded 'Serial Port 4' ('serial:/dev/ttyS4') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006838 foreach_func (2): Loaded 'Serial Port 5' ('serial:/dev/ttyS5') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006858 foreach_func (2): Loaded 'Serial Port 6' ('serial:/dev/ttyS6') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006878 foreach_func (2): Loaded 'Serial Port 7' ('serial:/dev/ttyS7') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006898 foreach_func (2): Loaded 'Serial Port 8' ('serial:/dev/ttyS8') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006919 foreach_func (2): Loaded 'Serial Port 9' ('serial:/dev/ttyS9') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006960 foreach_func (2): Loaded 'Serial Port 10' ('serial:/dev/ttyS10') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.006982 foreach_func (2): Loaded 'Serial Port 11' ('serial:/dev/ttyS11') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007002 foreach_func (2): Loaded 'Serial Port 12' ('serial:/dev/ttyS12') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007023 foreach_func (2): Loaded 'Serial Port 13' ('serial:/dev/ttyS13') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007043 foreach_func (2): Loaded 'Serial Port 14' ('serial:/dev/ttyS14') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007063 foreach_func (2): Loaded 'Serial Port 15' ('serial:/dev/ttyS15') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007083 foreach_func (2): Loaded 'Serial Port 16' ('serial:/dev/ttyS16') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007103 foreach_func (2): Loaded 'Serial Port 17' ('serial:/dev/ttyS17') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007123 foreach_func (2): Loaded 'Serial Port 18' ('serial:/dev/ttyS18') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007144 foreach_func (2): Loaded 'Serial Port 19' ('serial:/dev/ttyS19') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007163 foreach_func (2): Loaded 'Serial Port 20' ('serial:/dev/ttyS20') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007183 foreach_func (2): Loaded 'Serial Port 21' ('serial:/dev/ttyS21') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007204 foreach_func (2): Loaded 'Serial Port 22' ('serial:/dev/ttyS22') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007224 foreach_func (2): Loaded 'Serial Port 23' ('serial:/dev/ttyS23') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007244 foreach_func (2): Loaded 'Serial Port 24' ('serial:/dev/ttyS24') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007264 foreach_func (2): Loaded 'Serial Port 25' ('serial:/dev/ttyS25') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007284 foreach_func (2): Loaded 'Serial Port 26' ('serial:/dev/ttyS26') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007305 foreach_func (2): Loaded 'Serial Port 27' ('serial:/dev/ttyS27') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007325 foreach_func (2): Loaded 'Serial Port 28' ('serial:/dev/ttyS28') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007345 foreach_func (2): Loaded 'Serial Port 29' ('serial:/dev/ttyS29') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007365 foreach_func (2): Loaded 'Serial Port 30' ('serial:/dev/ttyS30') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007385 foreach_func (2): Loaded 'Serial Port 31' ('serial:/dev/ttyS31') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007406 foreach_func (2): Loaded 'Serial Port Device' ('serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007425 foreach_func (2): Loaded '' ('^serial:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/serial'. >> 0.007445 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.022209 foreach_func (2): Loaded '' ('^usb:') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.022282 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,003') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.022318 foreach_func (2): Loaded 'Universal Serial Bus' ('usb:001,033') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usb1'. >> 0.022382 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >> 0.023014 foreach_func (2): Loaded 'USB Mass Storage direct IO' ('usbdiskdirect:/dev/sda') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbdiskdirect'. >> 0.023046 foreach_func (2): Called for filename '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >> 0.023565 foreach_func (2): Loaded 'USB Mass Storage raw SCSI' ('usbscsi:/dev/sg0') from '/usr/lib/x86_64-linux-gnu/libgphoto2_port/0.12.0/usbscsi'. >> 0.023598 gp_port_info_list_count (2): Counting entries (44 available)... >> 0.023619 gp_port_info_list_count (2): 39 regular entries available. >> 0.023681 gp_abilities_list_load_dir (2): Using ltdl to load camera libraries from '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25'... >> 0.023817 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ax203'. >> 0.023842 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/canon'. >> 0.023863 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/digigr8'. >> 0.023882 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/dimagev'. >> 0.023902 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/directory'. >> 0.023921 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005a'. >> 0.023940 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/jl2005c'. >> 0.023959 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/kodak_dc240'. >> 0.023978 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/mars'. >> 0.023998 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/pentax'. >> 0.024016 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ptp2'. >> 0.024035 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/ricoh_g3'. >> 0.024054 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'. >> 0.024073 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sonix'. >> 0.024093 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sq905'. >> 0.024113 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/st2205'. >> 0.024133 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/topfield'. >> 0.024152 foreach_func (2): Found '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/tp6801'. >> 0.024175 gp_abilities_list_load_dir (2): Found 18 camera drivers. >> 0.072841 gp_port_info_list_count (2): Counting entries (44 available)... >> 0.072932 gp_port_info_list_count (2): 39 regular entries available. >> 0.072952 gp_port_new (2): Creating new device... >> 0.072978 gp_port_info_list_get_info (2): Getting info of entry 0 (44 available)... >> 0.073874 gp_port_set_settings (2): Setting settings... >> 0.073928 gp_port_info_list_get_info (2): Getting info of entry 1 (44 available)... >> 0.074231 gp_port_set_settings (2): Setting settings... >> 0.074260 gp_port_info_list_get_info (2): Getting info of entry 2 (44 available)... >> 0.074555 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.074588 gp_port_set_settings (2): Setting settings... >> 0.074611 gp_port_info_list_get_info (2): Getting info of entry 3 (44 available)... >> 0.074953 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.074990 gp_port_set_settings (2): Setting settings... >> 0.075011 gp_port_info_list_get_info (2): Getting info of entry 4 (44 available)... >> 0.075357 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.075390 gp_port_set_settings (2): Setting settings... >> 0.075412 gp_port_info_list_get_info (2): Getting info of entry 5 (44 available)... >> 0.075717 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.075740 gp_port_set_settings (2): Setting settings... >> 0.075760 gp_port_info_list_get_info (2): Getting info of entry 6 (44 available)... >> 0.076012 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076034 gp_port_set_settings (2): Setting settings... >> 0.076056 gp_port_info_list_get_info (2): Getting info of entry 7 (44 available)... >> 0.076305 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076327 gp_port_set_settings (2): Setting settings... >> 0.076347 gp_port_info_list_get_info (2): Getting info of entry 8 (44 available)... >> 0.076598 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076620 gp_port_set_settings (2): Setting settings... >> 0.076640 gp_port_info_list_get_info (2): Getting info of entry 9 (44 available)... >> 0.076889 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.076911 gp_port_set_settings (2): Setting settings... >> 0.076931 gp_port_info_list_get_info (2): Getting info of entry 10 (44 available)... >> 0.077211 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077237 gp_port_set_settings (2): Setting settings... >> 0.077258 gp_port_info_list_get_info (2): Getting info of entry 11 (44 available)... >> 0.077525 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077548 gp_port_set_settings (2): Setting settings... >> 0.077568 gp_port_info_list_get_info (2): Getting info of entry 12 (44 available)... >> 0.077823 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.077846 gp_port_set_settings (2): Setting settings... >> 0.077866 gp_port_info_list_get_info (2): Getting info of entry 13 (44 available)... >> 0.078117 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078139 gp_port_set_settings (2): Setting settings... >> 0.078160 gp_port_info_list_get_info (2): Getting info of entry 14 (44 available)... >> 0.078409 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078431 gp_port_set_settings (2): Setting settings... >> 0.078452 gp_port_info_list_get_info (2): Getting info of entry 15 (44 available)... >> 0.078700 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.078722 gp_port_set_settings (2): Setting settings... >> 0.078742 gp_port_info_list_get_info (2): Getting info of entry 16 (44 available)... >> 0.078990 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079012 gp_port_set_settings (2): Setting settings... >> 0.079033 gp_port_info_list_get_info (2): Getting info of entry 17 (44 available)... >> 0.079282 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079303 gp_port_set_settings (2): Setting settings... >> 0.079324 gp_port_info_list_get_info (2): Getting info of entry 18 (44 available)... >> 0.079572 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079593 gp_port_set_settings (2): Setting settings... >> 0.079614 gp_port_info_list_get_info (2): Getting info of entry 19 (44 available)... >> 0.079866 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.079887 gp_port_set_settings (2): Setting settings... >> 0.079908 gp_port_info_list_get_info (2): Getting info of entry 20 (44 available)... >> 0.080159 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080181 gp_port_set_settings (2): Setting settings... >> 0.080201 gp_port_info_list_get_info (2): Getting info of entry 21 (44 available)... >> 0.080450 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080472 gp_port_set_settings (2): Setting settings... >> 0.080492 gp_port_info_list_get_info (2): Getting info of entry 22 (44 available)... >> 0.080742 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.080764 gp_port_set_settings (2): Setting settings... >> 0.080804 gp_port_info_list_get_info (2): Getting info of entry 23 (44 available)... >> 0.081062 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081085 gp_port_set_settings (2): Setting settings... >> 0.081106 gp_port_info_list_get_info (2): Getting info of entry 24 (44 available)... >> 0.081382 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081408 gp_port_set_settings (2): Setting settings... >> 0.081429 gp_port_info_list_get_info (2): Getting info of entry 25 (44 available)... >> 0.081681 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.081703 gp_port_set_settings (2): Setting settings... >> 0.081723 gp_port_info_list_get_info (2): Getting info of entry 26 (44 available)... >> 0.082001 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082025 gp_port_set_settings (2): Setting settings... >> 0.082048 gp_port_info_list_get_info (2): Getting info of entry 27 (44 available)... >> 0.082327 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082351 gp_port_set_settings (2): Setting settings... >> 0.082375 gp_port_info_list_get_info (2): Getting info of entry 28 (44 available)... >> 0.082654 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.082679 gp_port_set_settings (2): Setting settings... >> 0.082702 gp_port_info_list_get_info (2): Getting info of entry 29 (44 available)... >> 0.082983 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083007 gp_port_set_settings (2): Setting settings... >> 0.083030 gp_port_info_list_get_info (2): Getting info of entry 30 (44 available)... >> 0.083309 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083334 gp_port_set_settings (2): Setting settings... >> 0.083357 gp_port_info_list_get_info (2): Getting info of entry 31 (44 available)... >> 0.083638 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083663 gp_port_set_settings (2): Setting settings... >> 0.083687 gp_port_info_list_get_info (2): Getting info of entry 32 (44 available)... >> 0.083971 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.083993 gp_port_set_settings (2): Setting settings... >> 0.084013 gp_port_info_list_get_info (2): Getting info of entry 33 (44 available)... >> 0.084265 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.084286 gp_port_set_settings (2): Setting settings... >> 0.084307 gp_port_info_list_get_info (2): Getting info of entry 34 (44 available)... >> 0.084557 gp_port_set_timeout (2): Setting port timeout to 500 milliseconds. >> 0.084580 gp_port_set_settings (2): Setting settings... >> 0.084600 gp_port_info_list_get_info (2): Getting info of entry 35 (44 available)... >> 0.097614 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.097666 gp_port_set_settings (2): Setting settings... >> 0.097706 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,003, (new int=0, conf=-1, alt=-1) port usb:001,003 >> 0.097726 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.097747 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.098945 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.099809 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.099931 gp_port_info_list_get_info (2): Getting info of entry 36 (44 available)... >> 0.114396 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.114465 gp_port_set_settings (2): Setting settings... >> 0.114508 gp_libusb1_update (2): (old int=0, conf=-1, alt=-1) port usb:001,033, (new int=0, conf=-1, alt=-1) port usb:001,033 >> 0.114528 gp_libusb1_update (2): lowlevel libusb1 port not yet opened, no need for libusb changes >> 0.114548 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.115691 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x29a, subclass, 0xffffffff, protocol 0xffffffff)... >> 0.116543 gp_libusb1_find_device_by_class_lib(2): Looking for USB device (class 0x6, subclass, 0x1, protocol 0x1)... >> 0.116653 gp_port_info_list_get_info (2): Getting info of entry 37 (44 available)... >> 0.117622 gp_port_set_settings (2): Setting settings... >> 0.117672 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.117968 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >> 0.118320 gp_port_set_settings (2): Setting settings... >> 0.118347 gp_abilities_list_detect_usb(2): Auto-detecting USB cameras... >> 0.119637 gp_abilities_list_detect_usb(2): Found 'Olympus C-2040Z' (0x7b4,0x105) >> 0.119663 gp_port_free (2): Freeing port... >> 0.119683 gp_port_close (2): Closing port... >> 0.120028 gp_camera_set_abilities (2): Setting abilities ('Olympus C-2040Z')... >> 0.120054 gp_setting_set (2): Setting key 'model' to value 'Olympus C-2040Z' (gphoto2) >> 0.120077 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >> 0.120371 gp_port_info_list_lookup_path(2): Looking for path 'usbscsi:/dev/sg0' (44 entries available)... >> 0.120397 gp_port_info_list_get_info (2): Getting info of entry 38 (44 available)... >> 0.120419 gp_camera_set_port_info (2): Setting port info for port 'USB Mass Storage raw SCSI' at 'usbscsi:/dev/sg0'... >> 0.120798 gp_port_set_settings (2): Setting settings... >> 0.120836 gp_setting_set (2): Setting key 'port' to value 'usbscsi:/dev/sg0' (gphoto2) >> 0.120859 save_settings (2): Saving 2 setting(s) to file "/home/blaas/.gphoto/settings" >> 0.121152 gp_camera_init (2): Initializing camera... >> 0.121227 gp_camera_init (2): Loading '/usr/lib/x86_64-linux-gnu/libgphoto2/2.5.25/sierra'... >> 0.121675 gp_port_open (2): Opening port... >> 0.121775 gp_port_usbscsi_lock (2): Trying to lock '/dev/sg0'... >> 0.121822 gp_port_set_settings (2): Setting settings... >> 0.121844 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >> 0.121874 sierra/sierra/library.c (2): Sending initialization sequence to the camera >> 0.121909 sierra/sierra/sierra.c (2): Establishing connection >> 0.121928 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.121948 sierra/sierra/library.c (2): sierra_get_int_register: register 0x01... >> 0.121966 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.121984 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.122007 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.122047 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.122069 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.123294 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.123341 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.123378 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >> 0.123415 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >> >> 0.123461 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 02 00 01 01 02 00- .C...... >> >> 0.123493 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.124591 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.124632 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.124671 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.124740 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.125519 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.125554 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.125577 sierra/sierra/library.c (2): Reading packet... >> 0.125598 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.125624 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.125645 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.125666 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.125685 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.193314 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.193416 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.193473 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.193517 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.194403 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.194504 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >> >> 0.194577 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.194664 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >> >> 0.194738 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.196782 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.196936 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 03 00 04 00 0d 00 00 00-0d 00 .......... >> >> 0.197005 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.197088 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.197156 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.198442 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.198557 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.198625 sierra/sierra/library.c (2): Packet successfully read. >> 0.198694 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >> 0.198757 sierra/sierra/library.c (2): Value of register 0x01: 0x0d. >> 0.198814 sierra/sierra/library.c (2): Writing acknowledgement... >> 0.198874 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.198931 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.199002 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.199116 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.199180 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.199791 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.199839 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.199886 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >> 0.199931 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.199988 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 06 - . >> >> 0.200086 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.200915 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.200978 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.201029 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.201070 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.202327 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.202423 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.202489 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >> 0.202557 sierra/sierra/library.c (2): Read value of register 0x01 and wrote acknowledgement. Returning. >> 0.202618 gp_port_set_timeout (2): Setting port timeout to 50 milliseconds. >> 0.202685 sierra/sierra/library.c (2): sierra_set_string_register: reg 84, value '\' >> 0.202745 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.202803 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.202873 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.202941 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.203002 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.217418 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.217566 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.217655 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >> 0.217732 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >> >> 0.217823 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 03 00 03 54 5c b3-00 .C...T\.. >> >> 0.217891 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.218849 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.218941 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.219029 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.219103 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.220151 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.220278 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.220355 sierra/sierra/library.c (2): Reading packet... >> 0.220430 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.220499 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.220579 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.220661 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.220735 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.221877 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.222024 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.222123 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.222286 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.223349 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.223482 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >> >> 0.223559 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.223648 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.223727 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.225102 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.225338 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 06 - . >> >> 0.225437 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.225529 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.225607 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 50 >> 0.226624 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.226726 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.226812 sierra/sierra/library.c (2): Packet type 0x06 read. Returning GP_OK. >> 0.226885 sierra/sierra/library.c (2): Packet successfully read. >> 0.226956 sierra/sierra/library.c (2): Transmission successful. >> 0.227025 sierra/sierra/sierra.c (2): *** folder support: yes >> 0.227104 gp_port_set_timeout (2): Setting port timeout to 2000 milliseconds. >> 0.227176 sierra/sierra/sierra.c (2): Closing connection >> 0.227242 sierra/sierra/sierra.c (2): ****************** sierra initialization OK >> 0.227311 sierra/sierra/sierra.c (2): Establishing connection >> 0.227387 gp_port_set_timeout (2): Setting port timeout to 5000 milliseconds. >> 0.227455 sierra/sierra/library.c (2): * sierra_capture >> 0.227529 sierra/sierra/library.c (2): sierra_get_int_register: register 0x33... >> 0.227597 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.227664 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.227747 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.227828 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.227898 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.240831 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.240981 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.241067 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 72 >> 0.241117 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 48 00 00 00 00 00 00 .........H...... >> >> 0.241161 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 72 bytes) >> 0000 48 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 H............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 02 00 01 33 34 00- .C...34. >> >> 0.241225 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.242484 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.242580 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.242668 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.242807 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.244060 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.244161 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.244241 sierra/sierra/library.c (2): Reading packet... >> 0.244324 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.244380 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.244450 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.244521 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.244581 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.262205 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.262351 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.262451 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.262521 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.263788 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.263890 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 4a 00 00 00 ............J... >> >> 0.263964 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.264050 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 4a 00 00 00 00 00 00 .........J...... >> >> 0.264123 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.265268 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.265405 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 74 bytes) >> 0000 4a 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 J............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 03 00 04 00 02 00 00 00-02 00 .......... >> >> 0.265483 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.265567 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.265640 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.266857 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.267008 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.267093 sierra/sierra/library.c (2): Packet successfully read. >> 0.267175 sierra/sierra/library.c (2): Successfully read packet. Interpreting result (0x03) >> 0.267247 sierra/sierra/library.c (2): Value of register 0x33: 0x02. >> 0.267315 sierra/sierra/library.c (2): Writing acknowledgement... >> 0.267384 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.267455 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.267538 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.267618 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.267693 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.268730 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.268819 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.268903 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 65 >> 0.268984 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.269088 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 06 - . >> >> 0.269314 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.270332 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.270428 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.270516 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.270591 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 5000 >> 0.271533 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.271635 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.271711 sierra/sierra/library.c (2): Successfully wrote acknowledgement. >> 0.271785 sierra/sierra/library.c (2): Read value of register 0x33 and wrote acknowledgement. Returning. >> 0.271860 gp_port_get_timeout (2): Current port timeout is 5000 milliseconds. >> 0.271935 gp_port_set_timeout (2): Setting port timeout to 20000 milliseconds. >> 0.272008 sierra/sierra/library.c (2): sierra_sub_action: action 2, sub action 0 >> 0.272139 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_write_packet >> 0.272244 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.272325 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.272405 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.272478 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >> 0.283930 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.284081 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND >> 0.284164 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_CMND writing 73 >> 0.284253 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c1 00 00 00 00 00 00 00-00 49 00 00 00 00 00 00 .........I...... >> >> 0.284359 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 73 bytes) >> 0000 49 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 I............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 1b 43 03 00 02 02 00 04-00 .C....... >> >> 0.284439 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >> 0.285753 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.285848 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.285936 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.286014 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >> 0.287237 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.287389 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.287467 sierra/sierra/library.c (2): Reading packet... >> 0.287541 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_read_packet >> 0.287605 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_RDY >> 0.287680 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c0 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.287750 gp_port_send_scsi_cmd (3): with scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 01 00 ff 9f-00 00 00 00 00 00 00 00 ................ >> >> 0.287815 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >> 0.318747 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.318926 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_SIZE >> 0.319027 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c4 00 00 00 00 00 00 00-00 10 00 00 00 00 00 00 ................ >> >> 0.319188 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >> 0.320669 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.320777 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 16 bytes) >> 0000 10 00 00 00 02 00 ff 9f-00 00 00 00 41 00 00 00 ............A... >> >> 0.320849 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_DATA >> 0.320935 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c2 00 00 00 00 00 00 00-00 41 00 00 00 00 00 00 .........A...... >> >> 0.321010 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >> 0.322196 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.322355 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 65 bytes) >> 0000 41 00 00 00 02 00 ff 9f-00 00 00 00 00 00 00 00 A............... >> 0010 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ >> 0040 11 - . >> >> 0.322433 sierra/sierra/sierra-usbwrap.c(2): usb_wrap_STAT >> 0.322522 gp_port_send_scsi_cmd (3): Sending scsi cmd: (hexdump of 16 bytes) >> 0000 c3 00 00 00 00 00 00 00-00 0e 00 00 00 00 00 00 ................ >> >> 0.322601 gp_port_usbscsi_send_scsi_cmd(2): setting scsi command timeout to 20000 >> 0.323692 gp_port_send_scsi_cmd (2): scsi cmd result: 0 >> 0.323831 gp_port_send_scsi_cmd (3): scsi cmd data: (hexdump of 14 bytes) >> 0000 0e 00 00 00 03 00 ff 9f-00 00 00 00 00 00 .............. >> >> 0.323914 sierra/sierra/library.c (2): Packet type 0x11 read. Returning GP_OK. >> 0.323989 sierra/sierra/library.c (2): Packet successfully read. >> 0.324082 gp_context_error (0): Packet was rejected by camera. Please contact <[email protected]>. >> 0.324276 sierra (2): Operation failed in sierra_sub_action (-1)! >> 0.324354 sierra (2): Operation failed in sierra_capture (-1)! >> 0.324429 sierra/sierra/sierra.c (2): Operation failed in camera_capture (-1)! >> 0.324497 sierra/sierra/sierra.c (2): Closing connection >> 0.324581 gp_camera_capture [gphoto2-camera.c:1339](0): 'camera->functions->capture (camera, type, path, context)' failed: -1 >> 3.328387 gp_camera_free (2): Freeing camera... >> 3.328585 gp_camera_exit (2): Exiting camera ('Olympus C-2040Z')... >> 3.328670 sierra/sierra/sierra.c (2): sierra camera_exit >> 3.328745 gp_port_close (2): Closing port... >> 3.329073 gp_filesystem_reset (2): resetting filesystem >> 3.329260 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >> 3.329348 gp_filesystem_lru_clear (2): fscache LRU list already empty >> 3.329422 delete_all_folders (2): Internally deleting all folders from '/'... >> 3.329496 lookup_folder (2): Lookup folder '/'... >> 3.329568 lookup_folder (2): Found! / is 0x558d8dec6890 >> 3.329641 recurse_delete_folder (2): Recurse delete folder 0x558d8dec6890// >> 3.329713 delete_all_files (2): Delete all files in folder 0x558d8dec6890// >> 3.329783 gp_port_free (2): Freeing port... >> 3.329851 gp_port_close (2): Closing port... >> 3.330067 gp_filesystem_reset (2): resetting filesystem >> 3.330146 gp_filesystem_lru_clear (2): Clearing fscache LRU list... >> 3.330215 gp_filesystem_lru_clear (2): fscache LRU list already empty >> 3.330284 delete_all_folders (2): Internally deleting all folders from '/'... >> 3.330352 lookup_folder (2): Lookup folder '/'... >> 3.330420 lookup_folder (2): Found! / is 0x558d8dec6890 >> 3.330490 recurse_delete_folder (2): Recurse delete folder 0x558d8dec6890// >> 3.330560 delete_all_files (2): Delete all files in folder 0x558d8dec6890// _______________________________________________ Gphoto-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gphoto-devel