Re: Unknown camera - Olympus EPL-6

I googled it, and couldn't find PTP mode, but did try MTP mode and it 
solved the problem.


Thanks, Larry

On 5/18/22 1:59 AM, Marcus Meissner wrote:
> Hi,
>
> Can you switch it to PTP or PictBridge mode?
>
> Only in this mode it will be accessible or potentially controlable libgphoto2.
>
> Ciao, Marcus
> On Tue, May 17, 2022 at 03:21:03PM -0700, Larry Griffin wrote:
>> Hope I got everything, if there is anything I can do, please let me know.
>>
>> Larry
>>
>> a USB mass storage based camera (appearing like a USB stick or USB drive) it
>> is mounted by your operating system and not gphoto2. In this case a report
>> to us is not necessary.
>>      Record the output of lsusb to get the USB ids.
>> #
>> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>> Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
>> Bus 001 Device 019: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet
>> K-2024 Multimedia Keyboard
>> Bus 001 Device 005: ID 0cf3:e007 Qualcomm Atheros Communications
>> Bus 001 Device 004: ID 0bda:58f6 Realtek Semiconductor Corp.
>> Integrated_Webcam_HD
>> Bus 001 Device 020: ID 07b4:012e Olympus Optical Co., Ltd E-PL6
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> #
>>   Record the output of gphoto2 --auto-detect to see if it is detected in a
>> # gphoto2 --auto-detect
>> Model Port
>> ----------------------------------------------------------
>> #
>> # generic way, or by another name. If it is detected already, run the steps
>> below:
>>      Record the output of LANG=C gphoto2 --summary >summary.txt to get
>> generic summary information into the summary.txt file.
>> # LANG=C gphoto2 --summary >summary.txt
>>
>> *** Error ***
>> Could not detect any camera
>> *** Error (-105: 'Unknown model') ***
>> #
>>      Record the output of LANG=C gphoto2 --list-all-config >config.txt to get
>> the configuration tree into the config.txt file.
>> #LANG=C gphoto2 --list-all-config >config.txt
>>
>> *** Error ***
>> Could not detect any camera
>>
>> *** Error ***
>> An error occurred in the io-library ('Unknown error'): No error description
>> available
>> *** Error (-105: 'Unknown model') ***
>> #
>>      Record the output of gphoto2 --capture-image to see if capture works
>> already.
>> #
>>   gphoto2 --capture-image
>>
>> *** Error ***
>> Could not detect any camera
>> *** Error (-105: 'Unknown model') ***
>>
>> For debugging messages, please use the --debug option.
>> Debugging messages may help finding a solution to your problem.
>> If you intend to send any error or debug messages to the gphoto
>> developer mailing list<[email protected]>, please run
>> gphoto2 as follows:
>>
>>      env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt
>> --capture-image
>>
>> Please make sure there is sufficient quoting around the arguments.
>> #env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --capture-image
>>
>> *** Error ***
>> Could not detect any camera
>> *** Error (-105: 'Unknown model') ***
>>
>>
>>
>>
>> _______________________________________________
>> Gphoto-devel mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/gphoto-devel

_______________________________________________
Gphoto-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/gphoto-devel