Canon EOS 350D

Hallo,

die o.g. Kamera wird von Darktable nicht erkannt("Keine unterstützten
Garäte gefunden"). Woran kann es liegen? Hier diverse (Fehler)meldungen
der Konsole:

--: gphoto2 --auto-detect
Modell                         Port

----------------------------------------------------------
Canon EOS 350D                 usb:001,029


--:env LANG=C gphoto2 --port usb: --capture-tethered
Waiting for events from camera. Press Ctrl-C to abort.


*** Error ***
An error occurred in the io-library ('Could not claim the USB device'):
Could not claim interface 0 (Device or resource busy). Make sure no
other program (gvfs-gphoto2-volume-monitor) or kernel module (such as
sdc2xx, stv680, spca50x) is using the device and you have read/write
access to the device.
*** Error (-53: 'Could not claim the USB device') ***

For debugging messages, please use the --debug option.
Debugging messages may help finding a solution to your problem.
If you intend to send any error or debug messages to the gphoto
developer mailing list <[email protected]>, please run
gphoto2 as follows:

    env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --port
usb: --capture-tethered

Please make sure there is sufficient quoting around the arguments.


--: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --port
usb: --capture-tethered
Waiting for events from camera. Press Ctrl-C to abort.


*** Error ***
An error occurred in the io-library ('Could not claim the USB device'):
Could not claim interface 0 (Device or resource busy). Make sure no
other program (gvfs-gphoto2-volume-monitor) or kernel module (such as
sdc2xx, stv680, spca50x) is using the device and you have read/write
access to the device.
*** Error (-53: 'Could not claim the USB device') ***


darktable -d camctl 2>1 >camctl.log
Fehlermeldung: Die Datenbank-Lock-Datei enthält eine PID, die zu einem
laufenden Programm passt: 4299

Die angeschlossene EOS 350D sendet die ganze Zeit "busy".

Woran kann es liegen? Wie läßt es sich beheben?

MfG

A. Hammes