Fwd: Canon EOS 350D
Fred Hammes <[email protected]> Fri, 15 Jan 2021 14:00:11 +0100
| Newsgroups | gmane.comp.multimedia.gphoto.user |
|---|---|
| Message-ID | <[email protected]> |
-------- Weitergeleitete Nachricht -------- Betreff: [Gphoto-user] Canon EOS 350D Datum: Fri, 15 Jan 2021 11:21:34 +0100 Von: Fred Hammes <[email protected]> An: [email protected] Hallo, die o.g. Kamera wird von Darktable nicht erkannt("Keine unterstützten Garäte gefunden"). Woran kann es liegen? Hier diverse (Fehler)meldungen der Konsole: --: gphoto2 --auto-detect Modell Port ---------------------------------------------------------- Canon EOS 350D usb:001,029 --:env LANG=C gphoto2 --port usb: --capture-tethered Waiting for events from camera. Press Ctrl-C to abort. *** Error *** An error occurred in the io-library ('Could not claim the USB device'): Could not claim interface 0 (Device or resource busy). Make sure no other program (gvfs-gphoto2-volume-monitor) or kernel module (such as sdc2xx, stv680, spca50x) is using the device and you have read/write access to the device. *** Error (-53: 'Could not claim the USB device') *** For debugging messages, please use the --debug option. Debugging messages may help finding a solution to your problem. If you intend to send any error or debug messages to the gphoto developer mailing list <[email protected]>, please run gphoto2 as follows: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --port usb: --capture-tethered Please make sure there is sufficient quoting around the arguments. --: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --port usb: --capture-tethered Waiting for events from camera. Press Ctrl-C to abort. *** Error *** An error occurred in the io-library ('Could not claim the USB device'): Could not claim interface 0 (Device or resource busy). Make sure no other program (gvfs-gphoto2-volume-monitor) or kernel module (such as sdc2xx, stv680, spca50x) is using the device and you have read/write access to the device. *** Error (-53: 'Could not claim the USB device') *** darktable -d camctl 2>1 >camctl.log Fehlermeldung: Die Datenbank-Lock-Datei enthält eine PID, die zu einem laufenden Programm passt: 4299 Die angeschlossene EOS 350D sendet die ganze Zeit "busy". Woran kann es liegen? Wie läßt es sich beheben? MfG A. Hammes _______________________________________________ Gphoto-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gphoto-user