RE: hxclientkit question

Hi Eric, 

1. Did you mean I should run "python umake.py"?

When I did so, I got the error:"python: can't open the file 'umake.py': [Errno 2] No such file or directory

In fact, in /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit folder, there was no umake.py or Umake.py file, there was only Umakefil, Umakefil.orig...

2. I also tested running "python /home/mobile-odh-root/HelixDNA/build/umake/umake.py
I got the following error:

/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 68: This file is the execution enviornment for Umake.  Within the umake.py
namespace, all the *.upp (post-processed Umakefil/*.pcf files) are
executed.  Try to keep the namespace clean, to discourage the use of utility
functions by over zealous Umakefil writiers (that's developers).  This is
also the namespace where the platform configuration files (*.cf) are
executed.: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 70: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 71: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 72: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 73: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 74: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 75: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 77: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 78: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 79: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 81: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 82: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 83: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 84: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 85: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 87: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 89: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 90: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 91: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 92: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 93: import: not found
/home/mobile-odh-root/HelixDNA/build/umake/umake.py: 94: Syntax error: word unexpected (expecting ")")

Thanks for your time.

Best regards,

Tran Hoang Thanh



--- On Fri, 8/1/08, ljun <[email protected]> wrote:

> From: ljun <[email protected]>
> Subject: RE: [Helix-client-dev] hxclientkit question
> To: [email protected], "'Milko Boic'" <[email protected]>
> Cc: [email protected]
> Date: Friday, August 1, 2008, 1:04 PM
> Try "umake.py" rather than "umake". Tell
> me what happens.
> Umake.py is used to generate Makefile.
> 
>  
> Best regards
>  
> Eric Li (李军)
>  
> www.realnetworks.com
> 
> > -----Original Message-----
> > From: Tran Hoang Thanh [mailto:[email protected]]
> > Sent: Friday, August 01, 2008 11:57 AM
> > To: 'Milko Boic'; [email protected]
> > Cc: [email protected]
> > Subject: RE: [Helix-client-dev] hxclientkit question
> > 
> > Hi Eric,
> > 
> > Thanks a lot for your fast response. I have gone
> through my build process again and would like to post my
> steps for your
> convenient
> > check.
> > 
> > 1. Yes, I went through all the steps in
> https://helixcommunity.org/developers/get_connected_to_cvs/quickstart
> > where my BUILD_ROOT and PATH as follows
> > 
> > My build folder is at
> /home/mobile-odh-root/HelixDNA/build
> > 
> > export BUILD_ROOT=/home/mobile-odh-root/HelixDNA/build
> > export PATH=$BUILD_ROOT/bin:$PATH
> > export SYSTEM_ID=linux-2.2-libc6-gcc32-i586
> > 
> > Then, I created "helix" directory in
> /home/mobile-odh-root/HelixDNA, cd to helix and run build
> by "python
> >
> /home/mobile-odh-root/HelixDNA/build/bin/build.py"
> > 
> > 2. After that, I chose options as follows
> > 
> > #  Select option '0' (Set BIF Branch)
> > 
> >     * Choose option '17'
> (hxclient_1_5_0_cayenne)
> > 
> > # Select option '1' (Set Target)
> > 
> >     * Choose option '3' (Player Targets)
> >           o Choose option '0'
> (player_hxclientkit)
> > 
> > # Select option '2' (Set Profile)
> > 
> >     * Choose option '2'
> (helix-client-all-defines)
> > 
> > # Select option '3' (Run Build)
> > 
> > Everything went fine (the last message showed
> "Build complete in 00:02, 0 of 5 modules failed")
> > 
> > 3. Until this point, I cd to
> /home/mobile-odh-root/HelixDNA/helix/hxclientkit
> > and run
> > 3.1 make clean ==>there was no error
> > 3.2 umake (==> bash: umake: command not found)
> > 3.3 make ==> there was no error
> > 
> > 4. I cd to "test" directory and saw the
> following files: GPL.txt, LICENSE.txt, linux2.pcf,
> main.cpp, RCSL.txt, RPSL.txt, Umakefil,
> unix.pcf
> > I rerun make clean, umake, make and still got the same
> errors.
> > 
> > May you give me any advice for this issue? Thanks a
> lot for your time.
> > 
> > Best regards,
> > 
> > Tran Hoang Thanh
> > 
> > 
> > 
> > --- On Fri, 8/1/08, ljun <[email protected]> wrote:
> > 
> > > From: ljun <[email protected]>
> > > Subject: RE: [Helix-client-dev] hxclientkit
> question
> > > To: [email protected], "'Milko
> Boic'" <[email protected]>
> > > Cc: [email protected]
> > > Date: Friday, August 1, 2008, 11:22 AM
> > > Comments inline.
> > >
> > > Best regards
> > >
> > > Eric Li (李军)
> > >
> > > www.realnetworks.com
> > > > -----Original Message-----
> > > > From:
> [email protected]
> > >
> [mailto:[email protected]] On
> > > Behalf Of Tran Hoang
> > > Thanh
> > > > Sent: Friday, August 01, 2008 10:37 AM
> > > > To: Milko Boic
> > > > Cc: [email protected]
> > > > Subject: [Helix-client-dev] hxclientkit
> question
> > > >
> > > > Hi Milko,
> > > >
> > > > I am using Helix DNA for integrating it into
> Moblin.
> > > However, I got the following issues when working
> with
> > > hxclientkit:
> > > >
> > > > 1. I have downloaded and followed
> instructions at
> > > >
> > >
> https://player.helixcommunity.org/2005/doc/hxclientkit/build-instructions.html#hxclientkit_Specifics
> > > > However, when building hxclientkit, I could
> not run
> > > "umake", my error was: umake: command
> not found
> > > [Eric Li] You haven't setup helix build
> system yet.
> > > Have you installed python? And make sure
> you've checked
> > > out the ribosome/build
> > > and "ribosome/build/bin" is in your
> PATH
> > > variable. You can refer to this page:
> > >
> https://helixcommunity.org/developers/get_connected_to_cvs/quickstart
> > >
> > > > Then, I still run make, everything went fine
> > > >
> > > > 2. I cd to test directory in order to test
> > > "main.cpp". At this point, I could not
> run make
> > > clean, umake or make. The errors were
> > > as
> > > > follows:
> > > > make: *** No rule to make target
> "clean".
> > > Stop
> > > > umake: command not found
> > > > make: *** No targets specified and no
> makefile found.
> > > Stop
> > > [Eric Li] I suppose that you have not generated
> Makefile
> > > via umake command, so you can't make. Set up
> Helix
> > > build system and run
> > > umake firstly.
> > > >
> > > > 3. I tested to build "main.cpp"
> (which is in
> > > test directory) by Eclipse. I also included
> > > libhxclient.so.1.0. as a shared library
> > > for
> > > > compilation. However, when I built the code,
> I got the
> > > errors as follows:
> > > >
> > > > undefined reference to
> 'ClientPlayerClose'
> > > > undefined reference to
> 'ClientPlayerCreate'
> > > > undefined reference to
> 'ClientPlayerOpenUrl'
> > > > undefined reference to
> 'ClientPlayerPlay'
> > > [Eric Li] Setup build system and then use make,
> after that
> > > see if these errors still exist.
> > > >
> > > > Do you have any idea or advice for me?
> Anyway, thanks
> > > a lot for your time
> > > >
> > > >
> > > >
> > > >
> > > > Best regards,
> > > >
> > > > Tran Hoang Thanh
> > > >
> > > >
> > > >
> > > > --- On Fri, 8/1/08, Milko Boic
> <[email protected]>
> > > wrote:
> > > >
> > > > > From: Milko Boic <[email protected]>
> > > > > Subject: [Helix-client-dev] Re: .mp4
> progressive
> > > download using RTP
> > > > > To: "Shivaji Patil"
> > > <[email protected]>
> > > > > Cc: [email protected]
> > > > > Date: Friday, August 1, 2008, 4:01 AM
> > > > > Shivaji,
> > > > >
> > > > > Capture of standard RTP stream and its
> recording
> > > into a mp4
> > > > > file format
> > > > > would be accomplished via dtdriver
> framework.
> > > > > The framework would use rtspfformat as
> the
> > > source.  Some
> > > > > modifications to
> > > > > this format would be needed to support
> .sdp files
> > > > > (extensions) to be able
> > > > > to open RTP streams w/o any RTSP.
> > > > > Modification to the existing renderer
> plugins
> > > would be
> > > > > needed to support
> > > > > packet assembly w/o decoding.
> > > > > mp4 filewriter would be used to
> write-out the
> > > file.
> > > > >
> > > > > Documents on mp4 file format are
> available from
> > > ISO and RTP
> > > > > from IETF.
> > > > > dtdriver framework information is
> available in
> > > Helix
> > > > > Community at
> > > > >
> > >
> https://datatype.helixcommunity.org/2005/devdocs/DTR-USR-DtdriveFramework.txt
> > > > > .
> > > > >
> > > > > Please direct specific questions in
> regard what
> > > you would
> > > > > like to do to
> > > > > [email protected].
> > > > >
> > > > > Thanks,
> > > > > Milko
> > > > >
> > > > > At 09:36 AM 7/31/2008, Shivaji Patil
> wrote:
> > > > > >Hi,
> > > > > >   I am working on .mp4 file 
> progressive
> > > download
> > > > > using RTP.   Please
> > > > > > proved me some documents or info
> if
> > > possible.
> > > > > >
> > > > > >Many Thanks
> > > > > >-Shivaji
> > > > >
> > > > >
> > > > >
> > > > >
> _______________________________________________
> > > > > Helix-client-dev mailing list
> > > > > [email protected]
> > > > >
> > >
> http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev
> > > >
> > > >
> _______________________________________________
> > > > Helix-client-dev mailing list
> > > > [email protected]
> > > >
> > >
> http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev

_______________________________________________
Helix-client-dev mailing list
[email protected]
http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev