RE: hxclientkit question

Comments inline.
 
Best regards
 
Eric Li (李军)
 
www.realnetworks.com

> -----Original Message-----
> From: Tran Hoang Thanh [mailto:[email protected]]
> Sent: Friday, August 01, 2008 1:28 PM
> To: 'Milko Boic'; [email protected]
> Cc: [email protected]
> Subject: RE: [Helix-client-dev] hxclientkit question
> 
> Hi Eric,
> 
> 1. Did you mean I should run "python umake.py"?
[Eric Li] No.
> 
> When I did so, I got the error:"python: can't open the file 'umake.py': [Errno 2] No such file or directory
> 
> In fact, in /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit folder, there was no umake.py or Umake.py file, there was only
> Umakefil, Umakefil.orig...
> 
> 2. I also tested running "python /home/mobile-odh-root/HelixDNA/build/umake/umake.py
[Eric Li] It's something like. I prefer to use "umake.py" or "python /home/mobile-odh-root/HelixDNA/build/bin/umake.py". Note: it's
"bin/umake.py", not "umake/umake.py". If you have add /home/mobile-odh-root/HelixDNA/build/bin/ to your PATH, certainty you can run
"umake.py" directly.
> I got the following error:
> 
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 68: This file is the execution enviornment for Umake.  Within the umake.py
> namespace, all the *.upp (post-processed Umakefil/*.pcf files) are
> executed.  Try to keep the namespace clean, to discourage the use of utility
> functions by over zealous Umakefil writiers (that's developers).  This is
> also the namespace where the platform configuration files (*.cf) are
> executed.: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 70: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 71: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 72: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 73: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 74: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 75: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 77: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 78: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 79: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 81: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 82: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 83: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 84: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 85: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 87: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 89: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 90: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 91: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 92: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 93: import: not found
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py: 94: Syntax error: word unexpected (expecting ")")
> 
> Thanks for your time.
> 
> Best regards,
> 
> Tran Hoang Thanh
> 
> 
> 
> --- On Fri, 8/1/08, ljun <[email protected]> wrote:
> 
> > From: ljun <[email protected]>
> > Subject: RE: [Helix-client-dev] hxclientkit question
> > To: [email protected], "'Milko Boic'" <[email protected]>
> > Cc: [email protected]
> > Date: Friday, August 1, 2008, 1:04 PM
> > Try "umake.py" rather than "umake". Tell
> > me what happens.
> > Umake.py is used to generate Makefile.
> >
> >
> > Best regards
> >
> > Eric Li (李军)
> >
> > www.realnetworks.com
> >
> > > -----Original Message-----
> > > From: Tran Hoang Thanh [mailto:[email protected]]
> > > Sent: Friday, August 01, 2008 11:57 AM
> > > To: 'Milko Boic'; [email protected]
> > > Cc: [email protected]
> > > Subject: RE: [Helix-client-dev] hxclientkit question
> > >
> > > Hi Eric,
> > >
> > > Thanks a lot for your fast response. I have gone
> > through my build process again and would like to post my
> > steps for your
> > convenient
> > > check.
> > >
> > > 1. Yes, I went through all the steps in
> > https://helixcommunity.org/developers/get_connected_to_cvs/quickstart
> > > where my BUILD_ROOT and PATH as follows
> > >
> > > My build folder is at
> > /home/mobile-odh-root/HelixDNA/build
> > >
> > > export BUILD_ROOT=/home/mobile-odh-root/HelixDNA/build
> > > export PATH=$BUILD_ROOT/bin:$PATH
> > > export SYSTEM_ID=linux-2.2-libc6-gcc32-i586
> > >
> > > Then, I created "helix" directory in
> > /home/mobile-odh-root/HelixDNA, cd to helix and run build
> > by "python
> > >
> > /home/mobile-odh-root/HelixDNA/build/bin/build.py"
> > >
> > > 2. After that, I chose options as follows
> > >
> > > #  Select option '0' (Set BIF Branch)
> > >
> > >     * Choose option '17'
> > (hxclient_1_5_0_cayenne)
> > >
> > > # Select option '1' (Set Target)
> > >
> > >     * Choose option '3' (Player Targets)
> > >           o Choose option '0'
> > (player_hxclientkit)
> > >
> > > # Select option '2' (Set Profile)
> > >
> > >     * Choose option '2'
> > (helix-client-all-defines)
> > >
> > > # Select option '3' (Run Build)
> > >
> > > Everything went fine (the last message showed
> > "Build complete in 00:02, 0 of 5 modules failed")
> > >
> > > 3. Until this point, I cd to
> > /home/mobile-odh-root/HelixDNA/helix/hxclientkit
> > > and run
> > > 3.1 make clean ==>there was no error
> > > 3.2 umake (==> bash: umake: command not found)
> > > 3.3 make ==> there was no error
> > >
> > > 4. I cd to "test" directory and saw the
> > following files: GPL.txt, LICENSE.txt, linux2.pcf,
> > main.cpp, RCSL.txt, RPSL.txt, Umakefil,
> > unix.pcf
> > > I rerun make clean, umake, make and still got the same
> > errors.
> > >
> > > May you give me any advice for this issue? Thanks a
> > lot for your time.
> > >
> > > Best regards,
> > >
> > > Tran Hoang Thanh
> > >
> > >
> > >
> > > --- On Fri, 8/1/08, ljun <[email protected]> wrote:
> > >
> > > > From: ljun <[email protected]>
> > > > Subject: RE: [Helix-client-dev] hxclientkit
> > question
> > > > To: [email protected], "'Milko
> > Boic'" <[email protected]>
> > > > Cc: [email protected]
> > > > Date: Friday, August 1, 2008, 11:22 AM
> > > > Comments inline.
> > > >
> > > > Best regards
> > > >
> > > > Eric Li (李军)
> > > >
> > > > www.realnetworks.com
> > > > > -----Original Message-----
> > > > > From:
> > [email protected]
> > > >
> > [mailto:[email protected]] On
> > > > Behalf Of Tran Hoang
> > > > Thanh
> > > > > Sent: Friday, August 01, 2008 10:37 AM
> > > > > To: Milko Boic
> > > > > Cc: [email protected]
> > > > > Subject: [Helix-client-dev] hxclientkit
> > question
> > > > >
> > > > > Hi Milko,
> > > > >
> > > > > I am using Helix DNA for integrating it into
> > Moblin.
> > > > However, I got the following issues when working
> > with
> > > > hxclientkit:
> > > > >
> > > > > 1. I have downloaded and followed
> > instructions at
> > > > >
> > > >
> > https://player.helixcommunity.org/2005/doc/hxclientkit/build-instructions.html#hxclientkit_Specifics
> > > > > However, when building hxclientkit, I could
> > not run
> > > > "umake", my error was: umake: command
> > not found
> > > > [Eric Li] You haven't setup helix build
> > system yet.
> > > > Have you installed python? And make sure
> > you've checked
> > > > out the ribosome/build
> > > > and "ribosome/build/bin" is in your
> > PATH
> > > > variable. You can refer to this page:
> > > >
> > https://helixcommunity.org/developers/get_connected_to_cvs/quickstart
> > > >
> > > > > Then, I still run make, everything went fine
> > > > >
> > > > > 2. I cd to test directory in order to test
> > > > "main.cpp". At this point, I could not
> > run make
> > > > clean, umake or make. The errors were
> > > > as
> > > > > follows:
> > > > > make: *** No rule to make target
> > "clean".
> > > > Stop
> > > > > umake: command not found
> > > > > make: *** No targets specified and no
> > makefile found.
> > > > Stop
> > > > [Eric Li] I suppose that you have not generated
> > Makefile
> > > > via umake command, so you can't make. Set up
> > Helix
> > > > build system and run
> > > > umake firstly.
> > > > >
> > > > > 3. I tested to build "main.cpp"
> > (which is in
> > > > test directory) by Eclipse. I also included
> > > > libhxclient.so.1.0. as a shared library
> > > > for
> > > > > compilation. However, when I built the code,
> > I got the
> > > > errors as follows:
> > > > >
> > > > > undefined reference to
> > 'ClientPlayerClose'
> > > > > undefined reference to
> > 'ClientPlayerCreate'
> > > > > undefined reference to
> > 'ClientPlayerOpenUrl'
> > > > > undefined reference to
> > 'ClientPlayerPlay'
> > > > [Eric Li] Setup build system and then use make,
> > after that
> > > > see if these errors still exist.
> > > > >
> > > > > Do you have any idea or advice for me?
> > Anyway, thanks
> > > > a lot for your time
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Best regards,
> > > > >
> > > > > Tran Hoang Thanh
> > > > >
> > > > >
> > > > >
> > > > > --- On Fri, 8/1/08, Milko Boic
> > <[email protected]>
> > > > wrote:
> > > > >
> > > > > > From: Milko Boic <[email protected]>
> > > > > > Subject: [Helix-client-dev] Re: .mp4
> > progressive
> > > > download using RTP
> > > > > > To: "Shivaji Patil"
> > > > <[email protected]>
> > > > > > Cc: [email protected]
> > > > > > Date: Friday, August 1, 2008, 4:01 AM
> > > > > > Shivaji,
> > > > > >
> > > > > > Capture of standard RTP stream and its
> > recording
> > > > into a mp4
> > > > > > file format
> > > > > > would be accomplished via dtdriver
> > framework.
> > > > > > The framework would use rtspfformat as
> > the
> > > > source.  Some
> > > > > > modifications to
> > > > > > this format would be needed to support
> > .sdp files
> > > > > > (extensions) to be able
> > > > > > to open RTP streams w/o any RTSP.
> > > > > > Modification to the existing renderer
> > plugins
> > > > would be
> > > > > > needed to support
> > > > > > packet assembly w/o decoding.
> > > > > > mp4 filewriter would be used to
> > write-out the
> > > > file.
> > > > > >
> > > > > > Documents on mp4 file format are
> > available from
> > > > ISO and RTP
> > > > > > from IETF.
> > > > > > dtdriver framework information is
> > available in
> > > > Helix
> > > > > > Community at
> > > > > >
> > > >
> > https://datatype.helixcommunity.org/2005/devdocs/DTR-USR-DtdriveFramework.txt
> > > > > > .
> > > > > >
> > > > > > Please direct specific questions in
> > regard what
> > > > you would
> > > > > > like to do to
> > > > > > [email protected].
> > > > > >
> > > > > > Thanks,
> > > > > > Milko
> > > > > >
> > > > > > At 09:36 AM 7/31/2008, Shivaji Patil
> > wrote:
> > > > > > >Hi,
> > > > > > >   I am working on .mp4 file
> > progressive
> > > > download
> > > > > > using RTP.   Please
> > > > > > > proved me some documents or info
> > if
> > > > possible.
> > > > > > >
> > > > > > >Many Thanks
> > > > > > >-Shivaji
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > _______________________________________________
> > > > > > Helix-client-dev mailing list
> > > > > > [email protected]
> > > > > >
> > > >
> > http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev
> > > > >
> > > > >
> > _______________________________________________
> > > > > Helix-client-dev mailing list
> > > > > [email protected]
> > > > >
> > > >
> > http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev


_______________________________________________
Helix-client-dev mailing list
[email protected]
http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev