RE: hxclientkit question

Hi,

Thanks a lot Eric and Daniel, you are really kind :)

I successfully built hxclientkit with your instruction. I also tested with "test" folder. I also followed with "python
/home/mobile-odh-root/HelixDNA/build/bin/umake.py" to create makefile in "test" folder.

The messages were as follows:

mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ sudo python /home/mobile-odh-root/HelixDNA/build/bin/umake.py
[#-00000001][2008-08-01 14:22:01][-1210115888][INFO ] : Ribosome v2.4.11
[#-00000002][2008-08-01 14:22:01][-1210115888][INFO ] : Using Python v2.5.1
[#-00000003][2008-08-01 14:22:01][-1210115888][INFO ] : Log dir: /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit/test/ribosome_logs
[#-00000005][2008-08-01 14:22:01][-1210115888][INFO ] : Running tool: umake
UMAKE: Umakefil -> Makefile in player/hxclientkit/test
UMAKE: Applying profile /home/mobile-odh-root/HelixDNA/build/umakepf/helix-client-all-defines.pf
mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ sudo make clean
rm -f dbg/testkit dbg/obj/lib dbg/testkit_libs.a dbg/obj/main.o
mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ sudo python /home/mobile-odh-root/HelixDNA/build/bin/umake.py
[#-00000001][2008-08-01 14:23:40][-1210160944][INFO ] : Ribosome v2.4.11
[#-00000002][2008-08-01 14:23:40][-1210160944][INFO ] : Using Python v2.5.1
[#-00000003][2008-08-01 14:23:40][-1210160944][INFO ] : Log dir: /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit/test/ribosome_logs
[#-00000005][2008-08-01 14:23:40][-1210160944][INFO ] : Running tool: umake
UMAKE: Umakefil -> Makefile in player/hxclientkit/test
UMAKE: Applying profile /home/mobile-odh-root/HelixDNA/build/umakepf/helix-client-all-defines.pf
mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ sudo make
g++ -pipe -Wall -Wreturn-type -Wno-non-virtual-dtor -fno-exceptions --permissive -Wno-ctor-dtor-privacy -fno-rtti -march=pentium -mcpu=pentium -O0 -g -DDEBUG -D_DEBUG  -I../../../common/runtime/pub -I/usr/X11R6/include -I../../../player/hxclientkit/pub -I./pub -I. -include dbg/player_hxclientkit_test_ribodefs.h -o dbg/obj/main.o -c main.cpp
`-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead.
python /home/mobile-odh-root/HelixDNA/build/bin/armerge.py -a ar -d dbg/obj/lib dbg/testkit_libs.a ../../../player/hxclientkit/dbg/libhxclient.a
[#-00000001][2008-08-01 14:23:45][1075537600][INFO ] : Ribosome v2.4.11
[#-00000002][2008-08-01 14:23:45][1075537600][INFO ] : Using Python v2.5.1
[#-00000003][2008-08-01 14:23:45][1075537600][INFO ] : Log dir: /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit/test/ribosome_logs
[#-00000005][2008-08-01 14:23:45][1075537600][INFO ] : Running tool: armerge
g++ -o dbg/testkit dbg/obj/main.o  dbg/testkit_libs.a -L/usr/X11R6/lib  -lX11 -lpthread -ldl
rm "dbg/testkit_libs.a"

Am I right when assuming that there was no error?

However, when I tested "testkit" in "dbg" folder I got error as follows:

mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ HELIX_LIBS=/usr/local/helix/HelixPlayer dbg/testkit file:///home/mobile-odh-root/Thanh/C++/Streaming/1.mp3
HX_ASSERT failed: (m_pIPrefs)... File plghand2.cpp, Line 6259
Aborted (core dumped)

For your information, I do not have RealPlayer, I only installed HelixPlayer in "/usr/local/helix/HelixPlayer". In this folder, I saw: "Bin", "codecs", "common", "doc", "mozilla", "plugins", "postinst", "share" folders and hxplay, hxplay.bin, install.log, license, readme files.

Thanks a lot for your time and support so far. 


Best regards,

Tran Hoang Thanh



--- On Fri, 8/1/08, ljun <[email protected]> wrote:

> From: ljun <[email protected]>
> Subject: RE: [Helix-client-dev] hxclientkit question
> To: [email protected], "'Milko Boic'" <[email protected]>
> Cc: [email protected]
> Date: Friday, August 1, 2008, 2:09 PM
> Comments inline.
>  
> Best regards
>  
> Eric Li (李军)
>  
> www.realnetworks.com
> 
> > -----Original Message-----
> > From: Tran Hoang Thanh [mailto:[email protected]]
> > Sent: Friday, August 01, 2008 1:28 PM
> > To: 'Milko Boic'; [email protected]
> > Cc: [email protected]
> > Subject: RE: [Helix-client-dev] hxclientkit question
> > 
> > Hi Eric,
> > 
> > 1. Did you mean I should run "python
> umake.py"?
> [Eric Li] No.
> > 
> > When I did so, I got the error:"python: can't
> open the file 'umake.py': [Errno 2] No such file or
> directory
> > 
> > In fact, in
> /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit
> folder, there was no umake.py or Umake.py file, there was
> only
> > Umakefil, Umakefil.orig...
> > 
> > 2. I also tested running "python
> /home/mobile-odh-root/HelixDNA/build/umake/umake.py
> [Eric Li] It's something like. I prefer to use
> "umake.py" or "python
> /home/mobile-odh-root/HelixDNA/build/bin/umake.py".
> Note: it's
> "bin/umake.py", not "umake/umake.py".
> If you have add /home/mobile-odh-root/HelixDNA/build/bin/
> to your PATH, certainty you can run
> "umake.py" directly.
> > I got the following error:
> > 
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 68: This file is the execution enviornment for Umake. 
> Within the umake.py
> > namespace, all the *.upp (post-processed
> Umakefil/*.pcf files) are
> > executed.  Try to keep the namespace clean, to
> discourage the use of utility
> > functions by over zealous Umakefil writiers
> (that's developers).  This is
> > also the namespace where the platform configuration
> files (*.cf) are
> > executed.: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 70: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 71: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 72: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 73: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 74: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 75: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 77: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 78: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 79: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 81: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 82: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 83: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 84: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 85: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 87: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 89: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 90: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 91: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 92: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 93: import: not found
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> 94: Syntax error: word unexpected (expecting ")")
> > 
> > Thanks for your time.
> > 
> > Best regards,
> > 
> > Tran Hoang Thanh
> > 
> > 
> > 
> > --- On Fri, 8/1/08, ljun <[email protected]> wrote:
> > 
> > > From: ljun <[email protected]>
> > > Subject: RE: [Helix-client-dev] hxclientkit
> question
> > > To: [email protected], "'Milko
> Boic'" <[email protected]>
> > > Cc: [email protected]
> > > Date: Friday, August 1, 2008, 1:04 PM
> > > Try "umake.py" rather than
> "umake". Tell
> > > me what happens.
> > > Umake.py is used to generate Makefile.
> > >
> > >
> > > Best regards
> > >
> > > Eric Li (李军)
> > >
> > > www.realnetworks.com
> > >
> > > > -----Original Message-----
> > > > From: Tran Hoang Thanh
> [mailto:[email protected]]
> > > > Sent: Friday, August 01, 2008 11:57 AM
> > > > To: 'Milko Boic'; [email protected]
> > > > Cc: [email protected]
> > > > Subject: RE: [Helix-client-dev] hxclientkit
> question
> > > >
> > > > Hi Eric,
> > > >
> > > > Thanks a lot for your fast response. I have
> gone
> > > through my build process again and would like to
> post my
> > > steps for your
> > > convenient
> > > > check.
> > > >
> > > > 1. Yes, I went through all the steps in
> > >
> https://helixcommunity.org/developers/get_connected_to_cvs/quickstart
> > > > where my BUILD_ROOT and PATH as follows
> > > >
> > > > My build folder is at
> > > /home/mobile-odh-root/HelixDNA/build
> > > >
> > > > export
> BUILD_ROOT=/home/mobile-odh-root/HelixDNA/build
> > > > export PATH=$BUILD_ROOT/bin:$PATH
> > > > export SYSTEM_ID=linux-2.2-libc6-gcc32-i586
> > > >
> > > > Then, I created "helix" directory
> in
> > > /home/mobile-odh-root/HelixDNA, cd to helix and
> run build
> > > by "python
> > > >
> > >
> /home/mobile-odh-root/HelixDNA/build/bin/build.py"
> > > >
> > > > 2. After that, I chose options as follows
> > > >
> > > > #  Select option '0' (Set BIF
> Branch)
> > > >
> > > >     * Choose option '17'
> > > (hxclient_1_5_0_cayenne)
> > > >
> > > > # Select option '1' (Set Target)
> > > >
> > > >     * Choose option '3' (Player
> Targets)
> > > >           o Choose option '0'
> > > (player_hxclientkit)
> > > >
> > > > # Select option '2' (Set Profile)
> > > >
> > > >     * Choose option '2'
> > > (helix-client-all-defines)
> > > >
> > > > # Select option '3' (Run Build)
> > > >
> > > > Everything went fine (the last message
> showed
> > > "Build complete in 00:02, 0 of 5 modules
> failed")
> > > >
> > > > 3. Until this point, I cd to
> > > /home/mobile-odh-root/HelixDNA/helix/hxclientkit
> > > > and run
> > > > 3.1 make clean ==>there was no error
> > > > 3.2 umake (==> bash: umake: command not
> found)
> > > > 3.3 make ==> there was no error
> > > >
> > > > 4. I cd to "test" directory and
> saw the
> > > following files: GPL.txt, LICENSE.txt,
> linux2.pcf,
> > > main.cpp, RCSL.txt, RPSL.txt, Umakefil,
> > > unix.pcf
> > > > I rerun make clean, umake, make and still
> got the same
> > > errors.
> > > >
> > > > May you give me any advice for this issue?
> Thanks a
> > > lot for your time.
> > > >
> > > > Best regards,
> > > >
> > > > Tran Hoang Thanh
> > > >
> > > >
> > > >
> > > > --- On Fri, 8/1/08, ljun
> <[email protected]> wrote:
> > > >
> > > > > From: ljun <[email protected]>
> > > > > Subject: RE: [Helix-client-dev]
> hxclientkit
> > > question
> > > > > To: [email protected],
> "'Milko
> > > Boic'" <[email protected]>
> > > > > Cc: [email protected]
> > > > > Date: Friday, August 1, 2008, 11:22 AM
> > > > > Comments inline.
> > > > >
> > > > > Best regards
> > > > >
> > > > > Eric Li (李军)
> > > > >
> > > > > www.realnetworks.com
> > > > > > -----Original Message-----
> > > > > > From:
> > > [email protected]
> > > > >
> > >
> [mailto:[email protected]] On
> > > > > Behalf Of Tran Hoang
> > > > > Thanh
> > > > > > Sent: Friday, August 01, 2008
> 10:37 AM
> > > > > > To: Milko Boic
> > > > > > Cc:
> [email protected]
> > > > > > Subject: [Helix-client-dev]
> hxclientkit
> > > question
> > > > > >
> > > > > > Hi Milko,
> > > > > >
> > > > > > I am using Helix DNA for
> integrating it into
> > > Moblin.
> > > > > However, I got the following issues
> when working
> > > with
> > > > > hxclientkit:
> > > > > >
> > > > > > 1. I have downloaded and followed
> > > instructions at
> > > > > >
> > > > >
> > >
> https://player.helixcommunity.org/2005/doc/hxclientkit/build-instructions.html#hxclientkit_Specifics
> > > > > > However, when building
> hxclientkit, I could
> > > not run
> > > > > "umake", my error was: umake:
> command
> > > not found
> > > > > [Eric Li] You haven't setup helix
> build
> > > system yet.
> > > > > Have you installed python? And make
> sure
> > > you've checked
> > > > > out the ribosome/build
> > > > > and "ribosome/build/bin" is
> in your
> > > PATH
> > > > > variable. You can refer to this page:
> > > > >
> > >
> https://helixcommunity.org/developers/get_connected_to_cvs/quickstart
> > > > >
> > > > > > Then, I still run make, everything
> went fine
> > > > > >
> > > > > > 2. I cd to test directory in order
> to test
> > > > > "main.cpp". At this point, I
> could not
> > > run make
> > > > > clean, umake or make. The errors were
> > > > > as
> > > > > > follows:
> > > > > > make: *** No rule to make target
> > > "clean".
> > > > > Stop
> > > > > > umake: command not found
> > > > > > make: *** No targets specified and
> no
> > > makefile found.
> > > > > Stop
> > > > > [Eric Li] I suppose that you have not
> generated
> > > Makefile
> > > > > via umake command, so you can't
> make. Set up
> > > Helix
> > > > > build system and run
> > > > > umake firstly.
> > > > > >
> > > > > > 3. I tested to build
> "main.cpp"
> > > (which is in
> > > > > test directory) by Eclipse. I also
> included
> > > > > libhxclient.so.1.0. as a shared library
> > > > > for
> > > > > > compilation. However, when I built
> the code,
> > > I got the
> > > > > errors as follows:
> > > > > >
> > > > > > undefined reference to
> > > 'ClientPlayerClose'
> > > > > > undefined reference to
> > > 'ClientPlayerCreate'
> > > > > > undefined reference to
> > > 'ClientPlayerOpenUrl'
> > > > > > undefined reference to
> > > 'ClientPlayerPlay'
> > > > > [Eric Li] Setup build system and then
> use make,
> > > after that
> > > > > see if these errors still exist.
> > > > > >
> > > > > > Do you have any idea or advice for
> me?
> > > Anyway, thanks
> > > > > a lot for your time
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Best regards,
> > > > > >
> > > > > > Tran Hoang Thanh
> > > > > >
> > > > > >
> > > > > >
> > > > > > --- On Fri, 8/1/08, Milko Boic
> > > <[email protected]>
> > > > > wrote:
> > > > > >
> > > > > > > From: Milko Boic
> <[email protected]>
> > > > > > > Subject: [Helix-client-dev]
> Re: .mp4
> > > progressive
> > > > > download using RTP
> > > > > > > To: "Shivaji Patil"
> > > > > <[email protected]>
> > > > > > > Cc:
> [email protected]
> > > > > > > Date: Friday, August 1, 2008,
> 4:01 AM
> > > > > > > Shivaji,
> > > > > > >
> > > > > > > Capture of standard RTP
> stream and its
> > > recording
> > > > > into a mp4
> > > > > > > file format
> > > > > > > would be accomplished via
> dtdriver
> > > framework.
> > > > > > > The framework would use
> rtspfformat as
> > > the
> > > > > source.  Some
> > > > > > > modifications to
> > > > > > > this format would be needed
> to support
> > > .sdp files
> > > > > > > (extensions) to be able
> > > > > > > to open RTP streams w/o any
> RTSP.
> > > > > > > Modification to the existing
> renderer
> > > plugins
> > > > > would be
> > > > > > > needed to support
> > > > > > > packet assembly w/o decoding.
> > > > > > > mp4 filewriter would be used
> to
> > > write-out the
> > > > > file.
> > > > > > >
> > > > > > > Documents on mp4 file format
> are
> > > available from
> > > > > ISO and RTP
> > > > > > > from IETF.
> > > > > > > dtdriver framework
> information is
> > > available in
> > > > > Helix
> > > > > > > Community at
> > > > > > >
> > > > >
> > >
> https://datatype.helixcommunity.org/2005/devdocs/DTR-USR-DtdriveFramework.txt
> > > > > > > .
> > > > > > >
> > > > > > > Please direct specific
> questions in
> > > regard what
> > > > > you would
> > > > > > > like to do to
> > > > > > >
> [email protected].
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Milko
> > > > > > >
> > > > > > > At 09:36 AM 7/31/2008,
> Shivaji Patil
> > > wrote:
> > > > > > > >Hi,
> > > > > > > >   I am working on .mp4
> file
> > > progressive
> > > > > download
> > > > > > > using RTP.   Please
> > > > > > > > proved me some documents
> or info
> > > if
> > > > > possible.
> > > > > > > >
> > > > > > > >Many Thanks
> > > > > > > >-Shivaji
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > _______________________________________________
> > > > > > > Helix-client-dev mailing list
> > > > > > >
> [email protected]
> > > > > > >
> > > > >
> > >
> http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev
> > > > > >
> > > > > >
> > > _______________________________________________
> > > > > > Helix-client-dev mailing list
> > > > > >
> [email protected]
> > > > > >
> > > > >
> > >
> http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev

_______________________________________________
Helix-client-dev mailing list
[email protected]
http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev