RE: hxclientkit question

I am not familiar with hxclientkit. Someone in this maillist could help.
You can try RealPlayer in place of HelixPlayer.

 
Best regards
 
Eric Li (李军)
 
www.realnetworks.com

> -----Original Message-----
> From: Tran Hoang Thanh [mailto:[email protected]]
> Sent: Friday, August 01, 2008 4:50 PM
> To: 'Milko Boic'; [email protected]
> Cc: [email protected]
> Subject: RE: [Helix-client-dev] hxclientkit question
> 
> Hi,
> 
> Thanks a lot Eric and Daniel, you are really kind :)
> 
> I successfully built hxclientkit with your instruction. I also tested with "test" folder. I also followed with "python
> /home/mobile-odh-root/HelixDNA/build/bin/umake.py" to create makefile in "test" folder.
> 
> The messages were as follows:
> 
> mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ sudo python /home/mobile-odh-root/HelixDNA/build/bin/umake.py
> [#-00000001][2008-08-01 14:22:01][-1210115888][INFO ] : Ribosome v2.4.11
> [#-00000002][2008-08-01 14:22:01][-1210115888][INFO ] : Using Python v2.5.1
> [#-00000003][2008-08-01 14:22:01][-1210115888][INFO ] : Log dir:
> /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit/test/ribosome_logs
> [#-00000005][2008-08-01 14:22:01][-1210115888][INFO ] : Running tool: umake
> UMAKE: Umakefil -> Makefile in player/hxclientkit/test
> UMAKE: Applying profile /home/mobile-odh-root/HelixDNA/build/umakepf/helix-client-all-defines.pf
> mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ sudo make clean
> rm -f dbg/testkit dbg/obj/lib dbg/testkit_libs.a dbg/obj/main.o
> mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ sudo python /home/mobile-odh-root/HelixDNA/build/bin/umake.py
> [#-00000001][2008-08-01 14:23:40][-1210160944][INFO ] : Ribosome v2.4.11
> [#-00000002][2008-08-01 14:23:40][-1210160944][INFO ] : Using Python v2.5.1
> [#-00000003][2008-08-01 14:23:40][-1210160944][INFO ] : Log dir:
> /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit/test/ribosome_logs
> [#-00000005][2008-08-01 14:23:40][-1210160944][INFO ] : Running tool: umake
> UMAKE: Umakefil -> Makefile in player/hxclientkit/test
> UMAKE: Applying profile /home/mobile-odh-root/HelixDNA/build/umakepf/helix-client-all-defines.pf
> mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ sudo make
> g++ -pipe -Wall -Wreturn-type -Wno-non-virtual-dtor -fno-exceptions --permissive -Wno-ctor-dtor-privacy -fno-rtti -march=pentium
> -mcpu=pentium -O0 -g -DDEBUG -D_DEBUG  -I../../../common/runtime/pub -I/usr/X11R6/include -I../../../player/hxclientkit/pub
-I./pub
> -I. -include dbg/player_hxclientkit_test_ribodefs.h -o dbg/obj/main.o -c main.cpp
> `-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead.
> python /home/mobile-odh-root/HelixDNA/build/bin/armerge.py -a ar -d dbg/obj/lib
> dbg/testkit_libs.a ../../../player/hxclientkit/dbg/libhxclient.a
> [#-00000001][2008-08-01 14:23:45][1075537600][INFO ] : Ribosome v2.4.11
> [#-00000002][2008-08-01 14:23:45][1075537600][INFO ] : Using Python v2.5.1
> [#-00000003][2008-08-01 14:23:45][1075537600][INFO ] : Log dir:
> /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit/test/ribosome_logs
> [#-00000005][2008-08-01 14:23:45][1075537600][INFO ] : Running tool: armerge
> g++ -o dbg/testkit dbg/obj/main.o  dbg/testkit_libs.a -L/usr/X11R6/lib  -lX11 -lpthread -ldl
> rm "dbg/testkit_libs.a"
> 
> Am I right when assuming that there was no error?
> 
> However, when I tested "testkit" in "dbg" folder I got error as follows:
> 
> mobile-odh-root@LinuxPC3:~/HelixDNA/helix/player/hxclientkit/test$ HELIX_LIBS=/usr/local/helix/HelixPlayer dbg/testkit
> file:///home/mobile-odh-root/Thanh/C++/Streaming/1.mp3
> HX_ASSERT failed: (m_pIPrefs)... File plghand2.cpp, Line 6259
> Aborted (core dumped)
> 
> For your information, I do not have RealPlayer, I only installed HelixPlayer in "/usr/local/helix/HelixPlayer". In this folder, I
saw:
> "Bin", "codecs", "common", "doc", "mozilla", "plugins", "postinst", "share" folders and hxplay, hxplay.bin, install.log, license,
readme
> files.
> 
> Thanks a lot for your time and support so far.
> 
> 
> Best regards,
> 
> Tran Hoang Thanh
> 
> 
> 
> --- On Fri, 8/1/08, ljun <[email protected]> wrote:
> 
> > From: ljun <[email protected]>
> > Subject: RE: [Helix-client-dev] hxclientkit question
> > To: [email protected], "'Milko Boic'" <[email protected]>
> > Cc: [email protected]
> > Date: Friday, August 1, 2008, 2:09 PM
> > Comments inline.
> >
> > Best regards
> >
> > Eric Li (李军)
> >
> > www.realnetworks.com
> >
> > > -----Original Message-----
> > > From: Tran Hoang Thanh [mailto:[email protected]]
> > > Sent: Friday, August 01, 2008 1:28 PM
> > > To: 'Milko Boic'; [email protected]
> > > Cc: [email protected]
> > > Subject: RE: [Helix-client-dev] hxclientkit question
> > >
> > > Hi Eric,
> > >
> > > 1. Did you mean I should run "python
> > umake.py"?
> > [Eric Li] No.
> > >
> > > When I did so, I got the error:"python: can't
> > open the file 'umake.py': [Errno 2] No such file or
> > directory
> > >
> > > In fact, in
> > /home/mobile-odh-root/HelixDNA/helix/player/hxclientkit
> > folder, there was no umake.py or Umake.py file, there was
> > only
> > > Umakefil, Umakefil.orig...
> > >
> > > 2. I also tested running "python
> > /home/mobile-odh-root/HelixDNA/build/umake/umake.py
> > [Eric Li] It's something like. I prefer to use
> > "umake.py" or "python
> > /home/mobile-odh-root/HelixDNA/build/bin/umake.py".
> > Note: it's
> > "bin/umake.py", not "umake/umake.py".
> > If you have add /home/mobile-odh-root/HelixDNA/build/bin/
> > to your PATH, certainty you can run
> > "umake.py" directly.
> > > I got the following error:
> > >
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 68: This file is the execution enviornment for Umake.
> > Within the umake.py
> > > namespace, all the *.upp (post-processed
> > Umakefil/*.pcf files) are
> > > executed.  Try to keep the namespace clean, to
> > discourage the use of utility
> > > functions by over zealous Umakefil writiers
> > (that's developers).  This is
> > > also the namespace where the platform configuration
> > files (*.cf) are
> > > executed.: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 70: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 71: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 72: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 73: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 74: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 75: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 77: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 78: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 79: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 81: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 82: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 83: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 84: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 85: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 87: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 89: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 90: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 91: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 92: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 93: import: not found
> > > /home/mobile-odh-root/HelixDNA/build/umake/umake.py:
> > 94: Syntax error: word unexpected (expecting ")")
> > >
> > > Thanks for your time.
> > >
> > > Best regards,
> > >
> > > Tran Hoang Thanh
> > >
> > >
> > >
> > > --- On Fri, 8/1/08, ljun <[email protected]> wrote:
> > >
> > > > From: ljun <[email protected]>
> > > > Subject: RE: [Helix-client-dev] hxclientkit
> > question
> > > > To: [email protected], "'Milko
> > Boic'" <[email protected]>
> > > > Cc: [email protected]
> > > > Date: Friday, August 1, 2008, 1:04 PM
> > > > Try "umake.py" rather than
> > "umake". Tell
> > > > me what happens.
> > > > Umake.py is used to generate Makefile.
> > > >
> > > >
> > > > Best regards
> > > >
> > > > Eric Li (李军)
> > > >
> > > > www.realnetworks.com
> > > >
> > > > > -----Original Message-----
> > > > > From: Tran Hoang Thanh
> > [mailto:[email protected]]
> > > > > Sent: Friday, August 01, 2008 11:57 AM
> > > > > To: 'Milko Boic'; [email protected]
> > > > > Cc: [email protected]
> > > > > Subject: RE: [Helix-client-dev] hxclientkit
> > question
> > > > >
> > > > > Hi Eric,
> > > > >
> > > > > Thanks a lot for your fast response. I have
> > gone
> > > > through my build process again and would like to
> > post my
> > > > steps for your
> > > > convenient
> > > > > check.
> > > > >
> > > > > 1. Yes, I went through all the steps in
> > > >
> > https://helixcommunity.org/developers/get_connected_to_cvs/quickstart
> > > > > where my BUILD_ROOT and PATH as follows
> > > > >
> > > > > My build folder is at
> > > > /home/mobile-odh-root/HelixDNA/build
> > > > >
> > > > > export
> > BUILD_ROOT=/home/mobile-odh-root/HelixDNA/build
> > > > > export PATH=$BUILD_ROOT/bin:$PATH
> > > > > export SYSTEM_ID=linux-2.2-libc6-gcc32-i586
> > > > >
> > > > > Then, I created "helix" directory
> > in
> > > > /home/mobile-odh-root/HelixDNA, cd to helix and
> > run build
> > > > by "python
> > > > >
> > > >
> > /home/mobile-odh-root/HelixDNA/build/bin/build.py"
> > > > >
> > > > > 2. After that, I chose options as follows
> > > > >
> > > > > #  Select option '0' (Set BIF
> > Branch)
> > > > >
> > > > >     * Choose option '17'
> > > > (hxclient_1_5_0_cayenne)
> > > > >
> > > > > # Select option '1' (Set Target)
> > > > >
> > > > >     * Choose option '3' (Player
> > Targets)
> > > > >           o Choose option '0'
> > > > (player_hxclientkit)
> > > > >
> > > > > # Select option '2' (Set Profile)
> > > > >
> > > > >     * Choose option '2'
> > > > (helix-client-all-defines)
> > > > >
> > > > > # Select option '3' (Run Build)
> > > > >
> > > > > Everything went fine (the last message
> > showed
> > > > "Build complete in 00:02, 0 of 5 modules
> > failed")
> > > > >
> > > > > 3. Until this point, I cd to
> > > > /home/mobile-odh-root/HelixDNA/helix/hxclientkit
> > > > > and run
> > > > > 3.1 make clean ==>there was no error
> > > > > 3.2 umake (==> bash: umake: command not
> > found)
> > > > > 3.3 make ==> there was no error
> > > > >
> > > > > 4. I cd to "test" directory and
> > saw the
> > > > following files: GPL.txt, LICENSE.txt,
> > linux2.pcf,
> > > > main.cpp, RCSL.txt, RPSL.txt, Umakefil,
> > > > unix.pcf
> > > > > I rerun make clean, umake, make and still
> > got the same
> > > > errors.
> > > > >
> > > > > May you give me any advice for this issue?
> > Thanks a
> > > > lot for your time.
> > > > >
> > > > > Best regards,
> > > > >
> > > > > Tran Hoang Thanh
> > > > >
> > > > >
> > > > >
> > > > > --- On Fri, 8/1/08, ljun
> > <[email protected]> wrote:
> > > > >
> > > > > > From: ljun <[email protected]>
> > > > > > Subject: RE: [Helix-client-dev]
> > hxclientkit
> > > > question
> > > > > > To: [email protected],
> > "'Milko
> > > > Boic'" <[email protected]>
> > > > > > Cc: [email protected]
> > > > > > Date: Friday, August 1, 2008, 11:22 AM
> > > > > > Comments inline.
> > > > > >
> > > > > > Best regards
> > > > > >
> > > > > > Eric Li (李军)
> > > > > >
> > > > > > www.realnetworks.com
> > > > > > > -----Original Message-----
> > > > > > > From:
> > > > [email protected]
> > > > > >
> > > >
> > [mailto:[email protected]] On
> > > > > > Behalf Of Tran Hoang
> > > > > > Thanh
> > > > > > > Sent: Friday, August 01, 2008
> > 10:37 AM
> > > > > > > To: Milko Boic
> > > > > > > Cc:
> > [email protected]
> > > > > > > Subject: [Helix-client-dev]
> > hxclientkit
> > > > question
> > > > > > >
> > > > > > > Hi Milko,
> > > > > > >
> > > > > > > I am using Helix DNA for
> > integrating it into
> > > > Moblin.
> > > > > > However, I got the following issues
> > when working
> > > > with
> > > > > > hxclientkit:
> > > > > > >
> > > > > > > 1. I have downloaded and followed
> > > > instructions at
> > > > > > >
> > > > > >
> > > >
> > https://player.helixcommunity.org/2005/doc/hxclientkit/build-instructions.html#hxclientkit_Specifics
> > > > > > > However, when building
> > hxclientkit, I could
> > > > not run
> > > > > > "umake", my error was: umake:
> > command
> > > > not found
> > > > > > [Eric Li] You haven't setup helix
> > build
> > > > system yet.
> > > > > > Have you installed python? And make
> > sure
> > > > you've checked
> > > > > > out the ribosome/build
> > > > > > and "ribosome/build/bin" is
> > in your
> > > > PATH
> > > > > > variable. You can refer to this page:
> > > > > >
> > > >
> > https://helixcommunity.org/developers/get_connected_to_cvs/quickstart
> > > > > >
> > > > > > > Then, I still run make, everything
> > went fine
> > > > > > >
> > > > > > > 2. I cd to test directory in order
> > to test
> > > > > > "main.cpp". At this point, I
> > could not
> > > > run make
> > > > > > clean, umake or make. The errors were
> > > > > > as
> > > > > > > follows:
> > > > > > > make: *** No rule to make target
> > > > "clean".
> > > > > > Stop
> > > > > > > umake: command not found
> > > > > > > make: *** No targets specified and
> > no
> > > > makefile found.
> > > > > > Stop
> > > > > > [Eric Li] I suppose that you have not
> > generated
> > > > Makefile
> > > > > > via umake command, so you can't
> > make. Set up
> > > > Helix
> > > > > > build system and run
> > > > > > umake firstly.
> > > > > > >
> > > > > > > 3. I tested to build
> > "main.cpp"
> > > > (which is in
> > > > > > test directory) by Eclipse. I also
> > included
> > > > > > libhxclient.so.1.0. as a shared library
> > > > > > for
> > > > > > > compilation. However, when I built
> > the code,
> > > > I got the
> > > > > > errors as follows:
> > > > > > >
> > > > > > > undefined reference to
> > > > 'ClientPlayerClose'
> > > > > > > undefined reference to
> > > > 'ClientPlayerCreate'
> > > > > > > undefined reference to
> > > > 'ClientPlayerOpenUrl'
> > > > > > > undefined reference to
> > > > 'ClientPlayerPlay'
> > > > > > [Eric Li] Setup build system and then
> > use make,
> > > > after that
> > > > > > see if these errors still exist.
> > > > > > >
> > > > > > > Do you have any idea or advice for
> > me?
> > > > Anyway, thanks
> > > > > > a lot for your time
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Best regards,
> > > > > > >
> > > > > > > Tran Hoang Thanh
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --- On Fri, 8/1/08, Milko Boic
> > > > <[email protected]>
> > > > > > wrote:
> > > > > > >
> > > > > > > > From: Milko Boic
> > <[email protected]>
> > > > > > > > Subject: [Helix-client-dev]
> > Re: .mp4
> > > > progressive
> > > > > > download using RTP
> > > > > > > > To: "Shivaji Patil"
> > > > > > <[email protected]>
> > > > > > > > Cc:
> > [email protected]
> > > > > > > > Date: Friday, August 1, 2008,
> > 4:01 AM
> > > > > > > > Shivaji,
> > > > > > > >
> > > > > > > > Capture of standard RTP
> > stream and its
> > > > recording
> > > > > > into a mp4
> > > > > > > > file format
> > > > > > > > would be accomplished via
> > dtdriver
> > > > framework.
> > > > > > > > The framework would use
> > rtspfformat as
> > > > the
> > > > > > source.  Some
> > > > > > > > modifications to
> > > > > > > > this format would be needed
> > to support
> > > > .sdp files
> > > > > > > > (extensions) to be able
> > > > > > > > to open RTP streams w/o any
> > RTSP.
> > > > > > > > Modification to the existing
> > renderer
> > > > plugins
> > > > > > would be
> > > > > > > > needed to support
> > > > > > > > packet assembly w/o decoding.
> > > > > > > > mp4 filewriter would be used
> > to
> > > > write-out the
> > > > > > file.
> > > > > > > >
> > > > > > > > Documents on mp4 file format
> > are
> > > > available from
> > > > > > ISO and RTP
> > > > > > > > from IETF.
> > > > > > > > dtdriver framework
> > information is
> > > > available in
> > > > > > Helix
> > > > > > > > Community at
> > > > > > > >
> > > > > >
> > > >
> > https://datatype.helixcommunity.org/2005/devdocs/DTR-USR-DtdriveFramework.txt
> > > > > > > > .
> > > > > > > >
> > > > > > > > Please direct specific
> > questions in
> > > > regard what
> > > > > > you would
> > > > > > > > like to do to
> > > > > > > >
> > [email protected].
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Milko
> > > > > > > >
> > > > > > > > At 09:36 AM 7/31/2008,
> > Shivaji Patil
> > > > wrote:
> > > > > > > > >Hi,
> > > > > > > > >   I am working on .mp4
> > file
> > > > progressive
> > > > > > download
> > > > > > > > using RTP.   Please
> > > > > > > > > proved me some documents
> > or info
> > > > if
> > > > > > possible.
> > > > > > > > >
> > > > > > > > >Many Thanks
> > > > > > > > >-Shivaji
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > _______________________________________________
> > > > > > > > Helix-client-dev mailing list
> > > > > > > >
> > [email protected]
> > > > > > > >
> > > > > >
> > > >
> > http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev
> > > > > > >
> > > > > > >
> > > > _______________________________________________
> > > > > > > Helix-client-dev mailing list
> > > > > > >
> > [email protected]
> > > > > > >
> > > > > >
> > > >
> > http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev


_______________________________________________
Helix-client-dev mailing list
[email protected]
http://lists.helixcommunity.org/mailman/listinfo/helix-client-dev